[Fri Dec 16 22:21:33 2011] Detection parameters:
  Position = (270.7, 303.9) = 3 13 1.83 8 22 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.0 +/- 13.4
  Background counts = 16.0
  Rate = 0.006 +/- 0.001

[Fri Dec 16 22:21:33 2011] Off-axis axis estimate = 2.05'
[Fri Dec 16 23:55:52 2011] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 23:55:52 2011] Initial guess for spatial extent in simple fitting = 7.45"
[Fri Dec 16 23:55:52 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.021
[Fri Dec 16 23:55:52 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 7.45"
[Sat Dec 17 01:14:50 2011] fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_src16.ximg exists
[Sat Dec 17 01:14:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_src16.csv
[Sat Dec 17 01:14:50 2011] fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat Dec 17 01:14:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_src16.csv
[Sat Dec 17 01:14:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 01:14:51 2011] fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat Dec 17 01:14:51 2011] fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat Dec 17 01:14:51 2011] Fit fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sat Dec 17 03:39:07 2011] Warning, spatial fit 16 centroid is now closest to src. 3
[Sat Dec 17 03:39:07 2011] Source 19 is offset by 1.515864 and -7.823232 pixels which is larger than
2 X fitted extent = 3.902014 x 3.902014, not incorporating fit results
[Sat Dec 17 03:39:07 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 03:39:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 03:39:07 2011] Assessing source extent using major
[Sat Dec 17 03:39:07 2011] Source does appear to be extended
[Sat Dec 17 03:39:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 05:46:37 2011] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 05:46:37 2011] Initial guess for spatial extent in simple fitting = 7.45"
[Sat Dec 17 05:46:37 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.021
[Sat Dec 17 05:46:37 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 7.45"
[Sat Dec 17 06:51:02 2011] fullrun_mos1_xmm0656201101_pi300-10000_cl_pass1_src11.ximg exists
[Sat Dec 17 06:51:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201101_pi300-10000_cl_pass1_src11.csv
[Sat Dec 17 06:51:02 2011] fullrun_mos1_xmm0656201101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Dec 17 06:51:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201101_pi300-10000_cl_pass1_src11.csv
[Sat Dec 17 06:51:02 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656201101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656201101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 06:51:03 2011] fullrun_mos1_xmm0656201101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Dec 17 06:51:03 2011] fullrun_mos1_xmm0656201101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Dec 17 06:51:03 2011] Fit fullrun_mos1_xmm0656201101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Dec 17 08:35:43 2011] Spatial fit model total counts = 1145.570000, observed total counts = 1137.000000
[Sat Dec 17 08:35:43 2011] Offset between fit and detection position for source 19 = 7.283963 pixels
[Sat Dec 17 08:35:43 2011] 1148.355000 total counts/ 770.958000 bgd. counts: snr = 13.591991
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 7.283963 pixels
  Position = (275.2, 298.1) = 3 13 0.52 8 22 28.4
  Extent = 14.9 (14.9-29.8)", rotation angle = 0
  Source counts = 377.4 +/- 33.9
  Background counts = 771.0
  Rate = 0.03 +/- 0.002
[Sat Dec 17 08:35:43 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 08:35:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 08:35:43 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 08:35:43 2011] Source does appear to be extended
[Sat Dec 17 08:35:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 08:35:43 2011] Source is confused with source 2
[Sat Dec 17 13:09:33 2011] XMMSAS src. selection expression = ellipse(23892.706000, 25890.212000, 894.432026, 894.432026, 0.000000, X, Y)
[Sat Dec 17 13:09:33 2011] Writing source region out to fullrun_mos1_xmm0656201101_pi300-10000_pass1_cl_src19_src.reg
[Sat Dec 17 13:09:33 2011] Extracting stamp from image fullrun_mos1_xmm0656201101_pi300-10000_cl_sm2.00.img.gz, (224, 247) - (327, 350)
[Sat Dec 17 13:09:34 2011] XMMSAS bgd. selection expression = annulus(23892.706000, 25890.212000, 1490.720043, 2981.440086, X, Y) && !ellipse(23077.023840, 27011.688800, 461.781613, 461.781613, 0.000000, X, Y) && !ellipse(24726.414000, 25333.708000, 1642.960047, 1642.960047, 0.000000, X, Y) && !ellipse(24444.538600, 24814.688000, 833.560024, 833.560024, 0.000000, X, Y) && !ellipse(26688.206000, 24758.422000, 2122.912061, 2122.912061, 0.000000, X, Y) && !ellipse(23985.669495, 24260.919037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24444.078888, 24177.681213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25101.349976, 27427.025543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26373.114319, 27875.712219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25006.254791, 23872.514801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22948.591156, 25118.172241, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 13:09:34 2011] Writing fullrun_mos1_xmm0656201101_pi300-10000_pass1_cl_src19.gif
[Sat Dec 17 13:12:37 2011] Mean detx,y = (-898.16, 401.36) 
[Sat Dec 17 13:12:38 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 13:12:47 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 13:12:47 2011] Setting source spectrum file to fullrun_mos1_xmm0656201101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Dec 17 13:12:47 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0656201101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat Dec 17 14:40:10 2011] Updating aperture counts using extracted products
[Sat Dec 17 14:40:10 2011] Error reading totcts from fullrun_mos1_xmm0656201101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Dec 17 14:40:10 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 14:40:10 2011] Using photon index=1.80, rate=0.0271, arf fullrun_mos1_xmm0656201101_pi300-10000_pass1_cl_src19.arf
[Sat Dec 17 14:40:10 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 14:40:10 2011] Updating source flux to 2.5e-13
[Sat Dec 17 14:40:12 2011] Flag b found in src. 19 procflags, skipping spectral fitting
[Sat Dec 17 14:40:12 2011] Flag c found in src. 19 procflags, skipping spectral fitting