[Fri Dec 16 22:21:33 2011] Detection parameters:
  Position = (276.5, 315.0) = 3 13 0.13 8 23 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.7 +/- 10.7
  Background counts = 15.5
  Rate = 0.003 +/- 0.0008

[Fri Dec 16 22:21:33 2011] Off-axis axis estimate = 1.99'
[Fri Dec 16 23:55:52 2011] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 23:55:52 2011] Initial guess for spatial extent in simple fitting = 7.42"
[Fri Dec 16 23:55:52 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.027
[Fri Dec 16 23:55:52 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 7.42"
[Sat Dec 17 01:14:50 2011] fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_src25.ximg exists
[Sat Dec 17 01:14:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_src25.csv
[Sat Dec 17 01:14:50 2011] fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Dec 17 01:14:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_src25.csv
[Sat Dec 17 01:14:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 01:14:51 2011] fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Dec 17 01:14:51 2011] fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Dec 17 01:14:51 2011] Fit fullrun_mos1_xmm0656201101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sat Dec 17 03:39:07 2011] Source 16 is offset by 3.438416 and -4.065337 pixels which is larger than
2 X fitted extent = 0.883931 x 0.883931, not incorporating fit results
[Sat Dec 17 03:39:07 2011] Spatial fit model total counts = 660.036000, observed total counts = 659.000000
[Sat Dec 17 03:39:07 2011] Offset between fit and detection position for source 16 = 6.267382 pixels
[Sat Dec 17 03:39:07 2011] Warning, changing simple spatial fit ID from 25 to 15
[Sat Dec 17 03:39:07 2011] 620.928603 total counts/ 620.928000 bgd. counts: snr = 0.000024
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 6.267382 pixels
  Position = (282.7, 315.8) = 3 12 58.30 8 23 45.1
  Extent = 13.6" x 13.6", rotation angle = 0
  Source counts = 0.0 +/- 24.9
  Background counts = 620.9
  Rate = 4e-08 +/- 0.002
  Deleting source due to low Poisson probability