[Mon Dec 19 14:44:48 2011] Detection parameters:
  Position = (250.8, 256.2) = 3 59 52.26 -72 8 49.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.5 +/- 8.1
  Background counts = 8.7
  Rate = 0.003 +/- 0.0007

[Mon Dec 19 14:44:48 2011] Off-axis axis estimate = 4.61'
[Mon Dec 19 16:13:40 2011] Using EEF radius (= 8.74 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 16:13:40 2011] Initial guess for spatial extent in simple fitting = 8.74"
[Mon Dec 19 16:13:40 2011] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.914
[Mon Dec 19 16:13:40 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 8.74"
[Mon Dec 19 17:15:42 2011] fullrun_mos1_xmm0656200501_pi300-10000_cl_pass0_src13.ximg exists
[Mon Dec 19 17:15:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656200501_pi300-10000_cl_pass0_src13.csv
[Mon Dec 19 17:15:42 2011] fullrun_mos1_xmm0656200501_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Dec 19 17:15:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656200501_pi300-10000_cl_pass0_src13.csv
[Mon Dec 19 17:15:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656200501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656200501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 17:15:42 2011] fullrun_mos1_xmm0656200501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Dec 19 17:15:42 2011] fullrun_mos1_xmm0656200501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Dec 19 17:15:42 2011] Fit fullrun_mos1_xmm0656200501_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Dec 19 18:38:03 2011] Spatial fit model total counts = 106.560000, observed total counts = 116.000000
[Mon Dec 19 18:38:03 2011] Offset between fit and detection position for source 18 = 4.469831 pixels
[Mon Dec 19 18:38:03 2011] 120.064500 total counts/ 25.460800 bgd. counts: snr = 18.748741
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 4.469831 pixels
  Position = (246.6, 257.6) = 3 59 56.28 -72 8 43.3
  Extent = 17.5 (17.4-34.9)", rotation angle = 0
  Source counts = 94.6 +/- 11.0
  Background counts = 25.5
  Rate = 0.005 +/- 0.0006
[Mon Dec 19 18:38:03 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 18:38:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 18:38:03 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 18:38:03 2011] Source does appear to be extended
[Mon Dec 19 18:38:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 19:58:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 19 19:58:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 19:58:29 2011] Initial guess for spatial extent in simple fitting = 17.47"
[Mon Dec 19 19:58:29 2011] source mask rpix=4.0, npix_max = 81, mask sum = 49, frac = 0.601
[Mon Dec 19 19:58:29 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 17.47"
[Mon Dec 19 20:35:38 2011] fullrun_mos1_xmm0656200501_pi300-10000_cl_pass1_src11.ximg exists
[Mon Dec 19 20:35:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656200501_pi300-10000_cl_pass1_src11.csv
[Mon Dec 19 20:35:38 2011] fullrun_mos1_xmm0656200501_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Dec 19 20:35:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0656200501_pi300-10000_cl_pass1_src11.csv
[Mon Dec 19 20:35:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0656200501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0656200501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 20:35:39 2011] fullrun_mos1_xmm0656200501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Dec 19 20:35:39 2011] fullrun_mos1_xmm0656200501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Dec 19 20:35:39 2011] Fit fullrun_mos1_xmm0656200501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Dec 19 21:50:12 2011] Source 18 is offset by -4.234644 and 1.273628 pixels which is larger than
2 X fitted extent = 2.202561 x 2.202561, not incorporating fit results
[Mon Dec 19 21:50:12 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 21:50:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 21:50:12 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 21:50:12 2011] Source does appear to be extended
[Mon Dec 19 21:50:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 22:23:24 2011] XMMSAS src. selection expression = ellipse(21401.824000, 22360.344800, 1048.302030, 1048.302030, 0.000000, X, Y)
[Mon Dec 19 22:23:24 2011] Writing source region out to fullrun_mos1_xmm0656200501_pi300-10000_pass1_cl_src18_src.reg
[Mon Dec 19 22:23:24 2011] Extracting stamp from image fullrun_mos1_xmm0656200501_pi300-10000_cl_sm2.00.img.gz, (186, 197) - (307, 318)
[Mon Dec 19 22:23:24 2011] XMMSAS bgd. selection expression = annulus(21401.824000, 22360.344800, 1747.170050, 3494.340101, X, Y) && !ellipse(25450.863000, 26792.424000, 2172.728063, 2172.728063, 0.000000, X, Y)
[Mon Dec 19 22:23:24 2011] Writing fullrun_mos1_xmm0656200501_pi300-10000_pass1_cl_src18.gif
[Mon Dec 19 22:27:42 2011] Mean detx,y = (1514.12, -6078.45) 
[Mon Dec 19 22:27:45 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 22:28:35 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 22:28:35 2011] Setting source spectrum file to fullrun_mos1_xmm0656200501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Dec 19 22:28:35 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0656200501_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon Dec 19 23:03:52 2011] Not generating rmf since there are only 94 counts
[Mon Dec 19 23:03:52 2011] rmf not generated due to insufficient counts
[Mon Dec 19 23:23:04 2011] Updating aperture counts using extracted products
[Mon Dec 19 23:23:04 2011] Error reading totcts from fullrun_mos1_xmm0656200501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Dec 19 23:23:04 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 23:23:04 2011] Using photon index=1.80, rate=0.0054, arf fullrun_mos1_xmm0656200501_pi300-10000_pass1_cl_src18.arf
[Mon Dec 19 23:23:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 23:23:04 2011] Updating source flux to 7e-14
[Mon Dec 19 23:23:10 2011] Flag b found in src. 18 procflags, skipping spectral fitting
[Mon Dec 19 23:23:10 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting