[Mon Mar 12 21:19:52 2012] Detection parameters:
  Position = (458.7, 270.9) = 9 8 7.01 14 36 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.8 +/- 10.3
  Background counts = 10.4
  Rate = 0.003 +/- 0.0005

[Mon Mar 12 21:19:52 2012] Off-axis axis estimate = 11.79'
[Mon Mar 12 23:16:15 2012] Using EEF radius (= 12.32 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 23:16:15 2012] Initial guess for spatial extent in simple fitting = 12.32"
[Mon Mar 12 23:16:15 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.945
[Mon Mar 12 23:16:15 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 12.32"
[Tue Mar 13 00:16:58 2012] fullrun_mos2_xmm0656200101_pi300-10000_cl_pass0_src18.ximg exists
[Tue Mar 13 00:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656200101_pi300-10000_cl_pass0_src18.csv
[Tue Mar 13 00:16:58 2012] fullrun_mos2_xmm0656200101_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue Mar 13 00:16:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656200101_pi300-10000_cl_pass0_src18.csv
[Tue Mar 13 00:16:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656200101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656200101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 00:16:58 2012] fullrun_mos2_xmm0656200101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue Mar 13 00:16:58 2012] fullrun_mos2_xmm0656200101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Mar 13 00:16:58 2012] Fit fullrun_mos2_xmm0656200101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Tue Mar 13 00:17:21 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 15.952828 pixels away
[Tue Mar 13 00:17:21 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 00:17:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 00:17:21 2012] Assessing source extent using major
[Tue Mar 13 00:17:21 2012] Source does appear to be extended
[Tue Mar 13 00:17:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 02:06:56 2012] Using EEF radius (= 12.32 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 02:06:56 2012] Initial guess for spatial extent in simple fitting = 12.32"
[Tue Mar 13 02:06:56 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.945
[Tue Mar 13 02:06:56 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 12.32"
[Tue Mar 13 03:06:51 2012] fullrun_mos2_xmm0656200101_pi300-10000_cl_pass1_src17.ximg exists
[Tue Mar 13 03:06:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656200101_pi300-10000_cl_pass1_src17.csv
[Tue Mar 13 03:06:51 2012] fullrun_mos2_xmm0656200101_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue Mar 13 03:06:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0656200101_pi300-10000_cl_pass1_src17.csv
[Tue Mar 13 03:06:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0656200101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0656200101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 03:06:52 2012] fullrun_mos2_xmm0656200101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue Mar 13 03:06:52 2012] fullrun_mos2_xmm0656200101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Mar 13 03:06:52 2012] Fit fullrun_mos2_xmm0656200101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Tue Mar 13 03:07:14 2012] Spatial fit model total counts = 162.953000, observed total counts = 163.000000
[Tue Mar 13 03:07:14 2012] Offset between fit and detection position for source 26 = 0.265783 pixels
[Tue Mar 13 03:07:14 2012] 164.397300 total counts/ 129.676000 bgd. counts: snr = 3.049061
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.265783 pixels
  Position = (458.5, 270.7) = 9 8 7.07 14 36 5.3
  Extent = 5.3 (3.8-8.7)", rotation angle = 0
  Source counts = 34.7 +/- 12.8
  Background counts = 129.7
  Rate = 0.002 +/- 0.0006
[Tue Mar 13 03:07:14 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 03:07:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 03:07:14 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 03:07:14 2012] Source does appear to be extended
[Tue Mar 13 03:07:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 04:49:24 2012] XMMSAS src. selection expression = ellipse(39842.365828, 23502.368800, 315.834009, 315.834009, 0.000000, X, Y)
[Tue Mar 13 04:49:24 2012] Writing source region out to fullrun_mos2_xmm0656200101_pi300-10000_pass1_cl_src26_src.reg
[Tue Mar 13 04:49:24 2012] Extracting stamp from image fullrun_mos2_xmm0656200101_pi300-10000_cl_sm2.00.img.gz, (440, 253) - (477, 289)
[Tue Mar 13 04:49:24 2012] XMMSAS bgd. selection expression = annulus(39842.365828, 23502.368800, 526.390015, 1052.780030, X, Y)
[Tue Mar 13 04:49:24 2012] Writing fullrun_mos2_xmm0656200101_pi300-10000_pass1_cl_src26.gif
[Tue Mar 13 04:56:35 2012] Mean detx,y = (-11472.20, -7875.54) 
[Tue Mar 13 04:56:37 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 13 04:56:50 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 13 04:56:51 2012] Setting source spectrum file to fullrun_mos2_xmm0656200101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue Mar 13 04:56:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0656200101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue Mar 13 05:22:48 2012] Not generating rmf since there are only 34 counts
[Tue Mar 13 05:22:48 2012] rmf not generated due to insufficient counts
[Tue Mar 13 05:28:46 2012] Updating aperture counts using extracted products
[Tue Mar 13 05:28:46 2012] Error reading totcts from fullrun_mos2_xmm0656200101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue Mar 13 05:28:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 05:28:48 2012] Using photon index=1.80, rate=0.00162, arf fullrun_mos2_xmm0656200101_pi300-10000_pass1_cl_src26.arf
[Tue Mar 13 05:28:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 05:28:48 2012] Updating source flux to 4.5e-14
[Tue Mar 13 05:29:51 2012] Source 26 has fewer than 100.000000 counts, skipping spectral fitting