[Wed Jun 27 16:23:59 2012] Detection parameters:
  Position = (409.5, 314.1) = 1 26 54.23 19 12 51.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.0 +/- 16.0
  Background counts = 30.4
  Rate = 0.005 +/- 0.0006

[Wed Jun 27 16:23:59 2012] Off-axis axis estimate = 8.13'
[Wed Jun 27 16:37:04 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 16:37:04 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Wed Jun 27 16:37:04 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.884
[Wed Jun 27 16:37:04 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.49"
[Wed Jun 27 16:53:04 2012] fullrun_mos1_xmm0655590501_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jun 27 16:53:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655590501_pi300-10000_cl_pass0_src4.csv
[Wed Jun 27 16:53:04 2012] fullrun_mos1_xmm0655590501_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jun 27 16:53:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655590501_pi300-10000_cl_pass0_src4.csv
[Wed Jun 27 16:53:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0655590501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0655590501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 16:53:05 2012] fullrun_mos1_xmm0655590501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jun 27 16:53:05 2012] fullrun_mos1_xmm0655590501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jun 27 16:53:05 2012] Fit fullrun_mos1_xmm0655590501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Jun 27 17:46:08 2012] Source 4 is offset by -9.181848 and 0.878314 pixels which is larger than
2 X fitted extent = 1.206101 x 1.206101, not incorporating fit results
[Wed Jun 27 17:46:08 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 17:46:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 17:46:08 2012] Assessing source extent using major
[Wed Jun 27 17:46:08 2012] Source does appear to be extended
[Wed Jun 27 17:46:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 17:47:24 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 17:47:24 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Wed Jun 27 17:47:24 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.884
[Wed Jun 27 17:47:24 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.49"
[Wed Jun 27 18:05:35 2012] fullrun_mos1_xmm0655590501_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jun 27 18:05:35 2012] fullrun_mos1_xmm0655590501_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jun 27 18:05:35 2012] Fit fullrun_mos1_xmm0655590501_pi300-10000_cl_pass1_src4 appears to have run properly
[Wed Jun 27 18:05:35 2012] fullrun_mos1_xmm0655590501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jun 27 18:05:35 2012] fullrun_mos1_xmm0655590501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jun 27 18:05:35 2012] Fit fullrun_mos1_xmm0655590501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Jun 27 18:31:57 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 12.658839 pixels away
[Wed Jun 27 18:31:57 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 18:31:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 18:31:57 2012] Assessing source extent using major
[Wed Jun 27 18:31:57 2012] Source does appear to be extended
[Wed Jun 27 18:31:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 19:03:46 2012] XMMSAS src. selection expression = ellipse(35575.127258, 27275.200348, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 27 19:03:46 2012] Writing source region out to fullrun_mos1_xmm0655590501_pi300-10000_pass1_cl_src4_src.reg
[Wed Jun 27 19:03:46 2012] Extracting stamp from image fullrun_mos1_xmm0655590501_pi300-10000_cl_sm2.00.img.gz, (372, 277) - (447, 352)
[Wed Jun 27 19:03:46 2012] XMMSAS bgd. selection expression = annulus(35575.127258, 27275.200348, 1087.500000, 2175.000000, X, Y)
[Wed Jun 27 19:03:46 2012] Writing fullrun_mos1_xmm0655590501_pi300-10000_pass1_cl_src4.gif
[Wed Jun 27 19:07:29 2012] Mean detx,y = (-6374.32, -9791.19) 
[Wed Jun 27 19:07:30 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 19:07:35 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 19:07:35 2012] Setting source spectrum file to fullrun_mos1_xmm0655590501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jun 27 19:07:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0655590501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Jun 27 19:24:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 27 19:24:55 2012] rmf not generated due to insufficient counts
[Wed Jun 27 19:38:43 2012] Updating aperture counts using extracted products
[Wed Jun 27 19:38:43 2012] Error reading totcts from fullrun_mos1_xmm0655590501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jun 27 19:38:43 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 19:38:43 2012] Using photon index=1.80, rate=0.00505, arf fullrun_mos1_xmm0655590501_pi300-10000_pass1_cl_src4.arf
[Wed Jun 27 19:38:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 19:38:43 2012] Updating source flux to 1.1e-13
[Wed Jun 27 19:38:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting