[Wed Jun 19 04:23:24 2013] Detection parameters:
  Position = (195.0, 132.0) = 1 27 57.28 18 59 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4277.5 +/- 79.6
  Background counts = 11.5
  Rate = 0.2 +/- 0.003

[Wed Jun 19 04:23:24 2013] Off-axis axis estimate = 14.21'
[Wed Jun 19 04:51:39 2013] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 04:51:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 19 04:51:39 2013] Initial guess for spatial extent in simple fitting = 13.53"
[Wed Jun 19 04:51:39 2013] source mask rpix=3.1, npix_max = 52, mask sum = 62, frac = 1.189
[Wed Jun 19 04:51:39 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 13.53"
[Wed Jun 19 05:14:27 2013] fullrun_mos1_xmm0655590201_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jun 19 05:14:27 2013] fullrun_mos1_xmm0655590201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jun 19 05:14:27 2013] Fit fullrun_mos1_xmm0655590201_pi300-10000_cl_pass0_src2 appears to have run properly
[Wed Jun 19 05:14:27 2013] fullrun_mos1_xmm0655590201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jun 19 05:14:27 2013] fullrun_mos1_xmm0655590201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jun 19 05:14:27 2013] Fit fullrun_mos1_xmm0655590201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Jun 19 05:35:52 2013] Warning, spatial fit 2 centroid is now closest to src. 1
[Wed Jun 19 05:35:52 2013] Spatial fit model total counts = 4605.980000, observed total counts = 4580.000000
[Wed Jun 19 05:35:52 2013] Offset between fit and detection position for source 2 = 3.698689 pixels
[Wed Jun 19 05:35:52 2013] Warning, changing simple spatial fit ID from 2 to 3
[Wed Jun 19 05:35:52 2013] 4539.328000 total counts/ 876.208000 bgd. counts: snr = 123.750664
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.698689 pixels
  Position = (194.8, 128.3) = 1 27 57.35 18 59 8.0
  Extent = 26.1 (25.3-26.5)" x 7.4 (7.1-7.7)", rotation angle = 92 (91-93) degrees
  Source counts = 3663.1 +/- 67.4
  Background counts = 876.2
  Rate = 0.1 +/- 0.003
[Wed Jun 19 05:35:52 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 05:35:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 05:35:52 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 05:35:52 2013] Source does appear to be extended
[Wed Jun 19 05:35:52 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.29
[Wed Jun 19 05:35:52 2013] Source is asymmetric
[Wed Jun 19 05:35:52 2013] Source is confused with source 1
[Wed Jun 19 05:42:21 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 19 05:42:21 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 19 05:42:21 2013] Initial guess for spatial extent in simple fitting = 16.77"
[Wed Jun 19 05:42:21 2013] source mask rpix=3.9, npix_max = 75, mask sum = 77, frac = 1.015
[Wed Jun 19 05:42:21 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 16.77"
[Wed Jun 19 05:56:49 2013] fullrun_mos1_xmm0655590201_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jun 19 05:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655590201_pi300-10000_cl_pass1_src2.csv
[Wed Jun 19 05:56:50 2013] fullrun_mos1_xmm0655590201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jun 19 05:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655590201_pi300-10000_cl_pass1_src2.csv
[Wed Jun 19 05:56:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0655590201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0655590201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 05:56:50 2013] fullrun_mos1_xmm0655590201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jun 19 05:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655590201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jun 19 05:56:50 2013] fullrun_mos1_xmm0655590201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jun 19 05:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655590201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jun 19 05:56:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0655590201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0655590201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 06:03:31 2013] Warning, spatial fit 2 centroid is now closest to src. 1
[Wed Jun 19 06:03:31 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 06:03:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 06:03:31 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 06:03:31 2013] Source does appear to be extended
[Wed Jun 19 06:03:31 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.29
[Wed Jun 19 06:03:31 2013] Source is asymmetric
[Wed Jun 19 06:24:57 2013] Counts = 3663.120000, rescaling region sizes by 2.000000
[Wed Jun 19 06:24:57 2013] XMMSAS src. selection expression = ellipse(16898.388400, 11113.050000, 3137.532090, 888.014426, 91.944580, X, Y)
[Wed Jun 19 06:24:57 2013] Writing source region out to fullrun_mos1_xmm0655590201_pi300-10000_pass1_cl_src2_src.reg
[Wed Jun 19 06:24:57 2013] Extracting stamp from image fullrun_mos1_xmm0655590201_pi300-10000_cl_sm2.00.img.gz, (14, 0) - (375, 309)
[Wed Jun 19 06:24:57 2013] XMMSAS bgd. selection expression = annulus(16898.388400, 11113.050000, 10458.440301, 20916.880602, X, Y) && !ellipse(23975.823480, 25026.047000, 1329.168038, 1250.856036, 36.112248, X, Y) && !ellipse(16966.879181, 12136.387909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34810.253143, 27623.967651, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 06:24:57 2013] Writing fullrun_mos1_xmm0655590201_pi300-10000_pass1_cl_src2.gif
[Wed Jun 19 06:27:35 2013] Mean detx,y = (15255.68, 1428.30) 
[Wed Jun 19 06:27:36 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 06:33:45 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 06:33:45 2013] Setting source spectrum file to fullrun_mos1_xmm0655590201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 19 06:33:45 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0655590201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jun 19 06:56:17 2013] Updating aperture counts using extracted products
[Wed Jun 19 06:56:17 2013] Total counts from fullrun_mos1_xmm0655590201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 5398.00
[Wed Jun 19 06:56:17 2013] Total counts from fullrun_mos1_xmm0655590201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 11906.00
[Wed Jun 19 06:56:17 2013] Got source and background scale factors 6857938.000000, 206076791.000000
[Wed Jun 19 06:56:17 2013] User source parameters:
  Position = (194.8, 128.3) = 1 27 57.35 18 59 8.0
  Extent = 26.1 (25.3-26.5)" x 7.4 (7.1-7.7)", rotation angle = 92 (91-93) degrees
  Source aperture counts = 5001.8 +/- 74.5
  Background aperture counts = 396.2
  Rate = 0.2 +/- 0.003

[Wed Jun 19 06:56:17 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 06:56:17 2013] Using photon index=1.80, rate=0.149, arf fullrun_mos1_xmm0655590201_pi300-10000_pass1_cl_src2.arf
[Wed Jun 19 06:56:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 06:56:17 2013] Updating source flux to 3.5e-12
[Wed Jun 19 06:56:19 2013] Flag c found in src. 2 procflags, skipping spectral fitting
[Wed Jun 19 06:56:21 2013] xmm0655590201/analysis//spectral/fullrun_mos1_xmm0655590201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete