[Sat Jun  9 19:09:53 2012] Detection parameters:
  Position = (151.2, 438.1) = 9 17 36.55 28 43 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 327.8 +/- 24.0
  Background counts = 19.4
  Rate = 0.02 +/- 0.002

[Sat Jun  9 19:09:54 2012] Off-axis axis estimate = 14.71'
[Sat Jun  9 19:12:30 2012] Using EEF radius (= 13.78 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 19:12:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 19:12:30 2012] Initial guess for spatial extent in simple fitting = 13.78"
[Sat Jun  9 19:12:30 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.040
[Sat Jun  9 19:12:30 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.78"
[Sat Jun  9 20:23:02 2012] fullrun_pn_xmm0655571001_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun  9 20:23:02 2012] fullrun_pn_xmm0655571001_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun  9 20:23:02 2012] Fit fullrun_pn_xmm0655571001_pi300-10000_cl_pass0_src3 appears to have run properly
[Sat Jun  9 20:23:02 2012] fullrun_pn_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun  9 20:23:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun  9 20:23:02 2012] fullrun_pn_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun  9 20:23:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun  9 20:23:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 21:41:28 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.419523 pixels away
[Sat Jun  9 21:41:28 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 21:41:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 21:41:28 2012] Assessing source extent using major
[Sat Jun  9 21:41:28 2012] Source does appear to be extended
[Sat Jun  9 21:41:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 21:41:55 2012] Using EEF radius (= 13.78 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 21:41:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 21:41:55 2012] Initial guess for spatial extent in simple fitting = 13.78"
[Sat Jun  9 21:41:55 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.040
[Sat Jun  9 21:41:55 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 13.78"
[Sat Jun  9 22:38:40 2012] fullrun_pn_xmm0655571001_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun  9 22:38:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655571001_pi300-10000_cl_pass1_src3.csv
[Sat Jun  9 22:38:40 2012] fullrun_pn_xmm0655571001_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun  9 22:38:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655571001_pi300-10000_cl_pass1_src3.csv
[Sat Jun  9 22:38:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0655571001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0655571001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 22:38:41 2012] fullrun_pn_xmm0655571001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun  9 22:38:41 2012] fullrun_pn_xmm0655571001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun  9 22:38:41 2012] Fit fullrun_pn_xmm0655571001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Jun  9 23:44:06 2012] Warning, spatial fit 3 centroid is now closest to src. 6
[Sat Jun  9 23:44:06 2012] Spatial fit model total counts = 733.059000, observed total counts = 730.000000
[Sat Jun  9 23:44:06 2012] Offset between fit and detection position for source 3 = 0.752803 pixels
[Sat Jun  9 23:44:06 2012] Warning, changing simple spatial fit ID from 3 to 5
[Sat Jun  9 23:44:06 2012] 746.767000 total counts/ 523.419000 bgd. counts: snr = 9.762416
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.752803 pixels
  Position = (150.8, 437.4) = 9 17 36.68 28 43 49.7
  Extent = 12.3 (9.1-15.7)", rotation angle = 0
  Source counts = 223.3 +/- 27.3
  Background counts = 523.4
  Rate = 0.01 +/- 0.002
[Sat Jun  9 23:44:06 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 23:44:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 23:44:06 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 23:44:06 2012] Source does appear to be extended
[Sat Jun  9 23:44:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 23:44:06 2012] Source is confused with source 7
[Sat Jun  9 23:44:30 2012] XMMSAS src. selection expression = ellipse(13074.736000, 38008.658000, 737.430021, 737.430021, 0.000000, X, Y)
[Sat Jun  9 23:44:30 2012] Writing source region out to fullrun_pn_xmm0655571001_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun  9 23:44:30 2012] Extracting stamp from image fullrun_pn_xmm0655571001_pi300-10000_cl_sm2.00.img.gz, (108, 395) - (193, 480)
[Sat Jun  9 23:44:30 2012] XMMSAS bgd. selection expression = annulus(13074.736000, 38008.658000, 1229.050035, 2458.100071, X, Y) && !ellipse(13156.487335, 37307.743622, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  9 23:44:30 2012] Writing fullrun_pn_xmm0655571001_pi300-10000_pass1_cl_src3.gif
[Sat Jun  9 23:48:32 2012] Mean detx,y = (-8724.22, -14401.32) 
[Sat Jun  9 23:48:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 23:49:39 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 23:49:40 2012] Setting source spectrum file to fullrun_pn_xmm0655571001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun  9 23:49:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0655571001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun 10 01:13:23 2012] Updating aperture counts using extracted products
[Sun Jun 10 01:13:23 2012] Error reading totcts from fullrun_pn_xmm0655571001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 10 01:13:25 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 01:13:25 2012] Using photon index=1.80, rate=0.0149, arf fullrun_pn_xmm0655571001_pi300-10000_pass1_cl_src3.arf
[Sun Jun 10 01:13:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 01:13:25 2012] Updating source flux to 1.2e-13
[Sun Jun 10 01:13:43 2012] Flag c found in src. 3 procflags, skipping spectral fitting