[Sat Jun  9 19:10:55 2012] Detection parameters:
  Position = (304.6, 422.0) = 9 16 45.84 28 42 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.9 +/- 9.6
  Background counts = 5.5
  Rate = 0.006 +/- 0.001

[Sat Jun  9 19:10:56 2012] Off-axis axis estimate = 8.97'
[Sat Jun  9 20:54:15 2012] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 20:54:15 2012] Initial guess for spatial extent in simple fitting = 10.91"
[Sat Jun  9 20:54:15 2012] source mask rpix=2.5, npix_max = 36, mask sum = 34, frac = 0.939
[Sat Jun  9 20:54:15 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.91"
[Sat Jun  9 21:41:16 2012] fullrun_mos2_xmm0655571001_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun  9 21:41:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655571001_pi300-10000_cl_pass0_src6.csv
[Sat Jun  9 21:41:16 2012] fullrun_mos2_xmm0655571001_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun  9 21:41:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655571001_pi300-10000_cl_pass0_src6.csv
[Sat Jun  9 21:41:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0655571001_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0655571001_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 21:41:17 2012] fullrun_mos2_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun  9 21:41:17 2012] fullrun_mos2_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun  9 21:41:17 2012] Fit fullrun_mos2_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Jun  9 21:41:39 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 15.206896 pixels away
[Sat Jun  9 21:41:39 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 21:41:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 21:41:39 2012] Assessing source extent using major
[Sat Jun  9 21:41:39 2012] Source does appear to be extended
[Sat Jun  9 21:41:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 23:03:30 2012] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 23:03:30 2012] Initial guess for spatial extent in simple fitting = 10.91"
[Sat Jun  9 23:03:30 2012] source mask rpix=2.5, npix_max = 36, mask sum = 34, frac = 0.939
[Sat Jun  9 23:03:30 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 10.91"
[Sat Jun  9 23:43:55 2012] fullrun_mos2_xmm0655571001_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jun  9 23:43:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655571001_pi300-10000_cl_pass1_src6.csv
[Sat Jun  9 23:43:55 2012] fullrun_mos2_xmm0655571001_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jun  9 23:43:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655571001_pi300-10000_cl_pass1_src6.csv
[Sat Jun  9 23:43:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0655571001_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0655571001_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 23:43:55 2012] fullrun_mos2_xmm0655571001_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jun  9 23:43:55 2012] fullrun_mos2_xmm0655571001_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jun  9 23:43:55 2012] Fit fullrun_mos2_xmm0655571001_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Jun  9 23:44:15 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 15.206896 pixels away
[Sat Jun  9 23:44:15 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 23:44:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 23:44:15 2012] Assessing source extent using major
[Sat Jun  9 23:44:15 2012] Source does appear to be extended
[Sat Jun  9 23:44:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 00:59:13 2012] XMMSAS src. selection expression = ellipse(26448.442810, 36666.346954, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 10 00:59:13 2012] Writing source region out to fullrun_mos2_xmm0655571001_pi300-10000_pass1_cl_src7_src.reg
[Sun Jun 10 00:59:13 2012] Extracting stamp from image fullrun_mos2_xmm0655571001_pi300-10000_cl_sm2.00.img.gz, (267, 385) - (342, 460)
[Sun Jun 10 00:59:13 2012] XMMSAS bgd. selection expression = annulus(26448.442810, 36666.346954, 1087.500000, 2175.000000, X, Y) && !ellipse(25191.548200, 35516.171800, 1191.864034, 1191.864034, 0.000000, X, Y)
[Sun Jun 10 00:59:13 2012] Writing fullrun_mos2_xmm0655571001_pi300-10000_pass1_cl_src7.gif
[Sun Jun 10 01:01:35 2012] Mean detx,y = (-3034.14, 8295.73) 
[Sun Jun 10 01:01:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 01:02:15 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 01:02:16 2012] Setting source spectrum file to fullrun_mos2_xmm0655571001_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jun 10 01:02:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0655571001_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Jun 10 01:10:45 2012] Not generating rmf since there are only 54 counts
[Sun Jun 10 01:10:45 2012] rmf not generated due to insufficient counts
[Sun Jun 10 01:13:28 2012] Updating aperture counts using extracted products
[Sun Jun 10 01:13:28 2012] Error reading totcts from fullrun_mos2_xmm0655571001_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jun 10 01:13:29 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 01:13:29 2012] Using photon index=1.80, rate=0.00579, arf fullrun_mos2_xmm0655571001_pi300-10000_pass1_cl_src7.arf
[Sun Jun 10 01:13:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 01:13:29 2012] Updating source flux to 9.7e-14
[Sun Jun 10 01:13:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 10 01:13:43 2012] xmm0655571001/analysis//spectral/fullrun_mos2_xmm0655571001_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete