[Sat Jun  9 19:10:17 2012] Detection parameters:
  Position = (251.9, 396.9) = 9 17 3.27 28 40 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.1 +/- 9.0
  Background counts = 6.2
  Rate = 0.005 +/- 0.0009

[Sat Jun  9 19:10:18 2012] Off-axis axis estimate = 7.90'
[Sat Jun  9 20:23:02 2012] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 20:23:02 2012] Initial guess for spatial extent in simple fitting = 10.38"
[Sat Jun  9 20:23:02 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.081
[Sat Jun  9 20:23:02 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.38"
[Sat Jun  9 20:54:15 2012] fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_src4.ximg exists
[Sat Jun  9 20:54:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_src4.csv
[Sat Jun  9 20:54:15 2012] fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Jun  9 20:54:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_src4.csv
[Sat Jun  9 20:54:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:54:15 2012] fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Jun  9 20:54:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun  9 20:54:15 2012] fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jun  9 20:54:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun  9 20:54:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 21:41:34 2012] Warning, spatial fit 4 centroid is now closest to src. 12
[Sat Jun  9 21:41:34 2012] Spatial fit model total counts = 134.879000, observed total counts = 126.000000
[Sat Jun  9 21:41:34 2012] Offset between fit and detection position for source 7 = 2.461964 pixels
[Sat Jun  9 21:41:34 2012] Warning, changing simple spatial fit ID from 4 to 12
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 2.461964 pixels
  Position = (251.3, 394.5) = 9 17 3.46 28 40 43.4
  Extent = 15.2 (11.9-18.6)", rotation angle = 0
  Source counts = 131.7 +/- 11.5
  Background counts = 0.0
  Rate = 0.008 +/- 0.0007
 Deleting source due to low signal-to-noise ratio