[Sat Jun  9 19:10:17 2012] Detection parameters:
  Position = (303.8, 320.2) = 9 16 46.09 28 35 26.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.1 +/- 13.1
  Background counts = 5.6
  Rate = 0.007 +/- 0.0009

[Sat Jun  9 19:10:18 2012] Off-axis axis estimate = 1.63'
[Sat Jun  9 20:23:02 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 20:23:02 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sat Jun  9 20:23:02 2012] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.747
[Sat Jun  9 20:23:02 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.24"
[Sat Jun  9 20:54:15 2012] fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun  9 20:54:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_src3.csv
[Sat Jun  9 20:54:15 2012] fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun  9 20:54:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_src3.csv
[Sat Jun  9 20:54:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:54:15 2012] fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun  9 20:54:15 2012] fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun  9 20:54:15 2012] Fit fullrun_mos1_xmm0655571001_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jun  9 21:41:34 2012] Spatial fit model total counts = 133.893000, observed total counts = 138.000000
[Sat Jun  9 21:41:34 2012] Offset between fit and detection position for source 2 = 0.887167 pixels
[Sat Jun  9 21:41:34 2012] 138.967000 total counts/ 93.359400 bgd. counts: snr = 4.720176
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.887167 pixels
  Position = (303.9, 321.1) = 9 16 46.05 28 35 24.2
  Extent = 3.8 (1.8-5.7)", rotation angle = 0
  Source counts = 45.6 +/- 11.8
  Background counts = 93.4
  Rate = 0.003 +/- 0.0007
[Sat Jun  9 21:41:34 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 21:41:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 21:41:34 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 21:41:34 2012] Source does appear to be extended
[Sat Jun  9 21:41:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 22:38:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 22:38:41 2012] Initial guess for spatial extent in simple fitting = 3.80"
[Sat Jun  9 22:38:41 2012] source mask rpix=0.9, npix_max = 7, mask sum = 3, frac = 0.397
[Sat Jun  9 22:38:41 2012] Skipping simple spatial due to low active detector fraction
[Sat Jun  9 23:44:09 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 23:44:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 23:44:09 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 23:44:09 2012] Source does appear to be extended
[Sat Jun  9 23:44:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 00:47:06 2012] XMMSAS src. selection expression = ellipse(26394.208600, 27887.993540, 228.076207, 228.076207, 0.000000, X, Y)
[Sun Jun 10 00:47:06 2012] Writing source region out to fullrun_mos1_xmm0655571001_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun 10 00:47:06 2012] Extracting stamp from image fullrun_mos1_xmm0655571001_pi300-10000_cl_sm2.00.img.gz, (291, 308) - (317, 334)
[Sun Jun 10 00:47:06 2012] XMMSAS bgd. selection expression = annulus(26394.208600, 27887.993540, 380.127011, 760.254022, X, Y)
[Sun Jun 10 00:47:06 2012] Writing fullrun_mos1_xmm0655571001_pi300-10000_pass1_cl_src2.gif
[Sun Jun 10 00:47:44 2012] Mean detx,y = (272.38, -233.84) 
[Sun Jun 10 00:47:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 00:47:59 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 00:47:59 2012] Setting source spectrum file to fullrun_mos1_xmm0655571001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 10 00:47:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0655571001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun 10 00:56:40 2012] Not generating rmf since there are only 45 counts
[Sun Jun 10 00:56:40 2012] rmf not generated due to insufficient counts
[Sun Jun 10 01:13:27 2012] Updating aperture counts using extracted products
[Sun Jun 10 01:13:27 2012] Error reading totcts from fullrun_mos1_xmm0655571001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 10 01:13:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 01:13:27 2012] Using photon index=1.80, rate=0.00275, arf fullrun_mos1_xmm0655571001_pi300-10000_pass1_cl_src2.arf
[Sun Jun 10 01:13:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 01:13:28 2012] Updating source flux to 4.1e-14
[Sun Jun 10 01:13:31 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting