[Fri Dec 23 02:38:40 2011] Detection parameters:
  Position = (286.8, 266.5) = 8 26 13.67 -37 37 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6085.5 +/- 96.3
  Background counts = 12.0
  Rate = 0.3 +/- 0.005

[Fri Dec 23 02:38:42 2011] Off-axis axis estimate = 2.47'
[Fri Dec 23 04:00:30 2011] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 04:00:30 2011] Initial guess for spatial extent in simple fitting = 7.66"
[Fri Dec 23 04:00:30 2011] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.684
[Fri Dec 23 04:00:30 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.66"
[Fri Dec 23 04:32:20 2011] fullrun_mos2_xmm0655490301_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 23 04:32:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655490301_pi300-10000_cl_pass0_src1.csv
[Fri Dec 23 04:32:20 2011] fullrun_mos2_xmm0655490301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 23 04:32:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655490301_pi300-10000_cl_pass0_src1.csv
[Fri Dec 23 04:32:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0655490301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0655490301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 04:32:20 2011] fullrun_mos2_xmm0655490301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 23 04:32:20 2011] fullrun_mos2_xmm0655490301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 23 04:32:20 2011] Fit fullrun_mos2_xmm0655490301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 23 04:32:35 2011] Source 1 is offset by -6.221214 and -7.587333 pixels which is larger than
2 X fitted extent = 0.880676 x 0.880676, not incorporating fit results
[Fri Dec 23 04:32:35 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 04:32:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 04:32:35 2011] Assessing source extent using major
[Fri Dec 23 04:32:35 2011] Source does appear to be extended
[Fri Dec 23 04:32:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 05:28:05 2011] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 05:28:05 2011] Initial guess for spatial extent in simple fitting = 7.66"
[Fri Dec 23 05:28:05 2011] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.684
[Fri Dec 23 05:28:05 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.66"
[Fri Dec 23 05:59:52 2011] fullrun_mos2_xmm0655490301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 23 05:59:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655490301_pi300-10000_cl_pass1_src1.csv
[Fri Dec 23 05:59:52 2011] fullrun_mos2_xmm0655490301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 23 05:59:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655490301_pi300-10000_cl_pass1_src1.csv
[Fri Dec 23 05:59:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0655490301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0655490301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 05:59:52 2011] fullrun_mos2_xmm0655490301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 23 05:59:52 2011] fullrun_mos2_xmm0655490301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 23 05:59:53 2011] Fit fullrun_mos2_xmm0655490301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 23 06:00:04 2011] Spatial fit model total counts = 5325.000000, observed total counts = 5325.000000
[Fri Dec 23 06:00:04 2011] Offset between fit and detection position for source 1 = 0.657835 pixels
[Fri Dec 23 06:00:04 2011] 5362.020000 total counts/ 1204.250000 bgd. counts: snr = 119.812501
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.657835 pixels
  Position = (286.7, 265.8) = 8 26 13.73 -37 37 11.6
  Extent = 6.3 (6.1-6.4)", rotation angle = 0
  Source counts = 4157.8 +/- 73.2
  Background counts = 1204.2
  Rate = 0.2 +/- 0.003
[Fri Dec 23 06:00:04 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 06:00:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 06:00:04 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 06:00:04 2011] Source does appear to be extended
[Fri Dec 23 06:00:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 07:27:54 2011] Counts = 4157.770000, rescaling region sizes by 2.000000
[Fri Dec 23 07:27:54 2011] XMMSAS src. selection expression = ellipse(24891.591600, 23077.762800, 753.745222, 753.745222, 0.000000, X, Y)
[Fri Dec 23 07:27:54 2011] Writing source region out to fullrun_mos2_xmm0655490301_pi300-10000_pass1_cl_src1_src.reg
[Fri Dec 23 07:27:54 2011] Extracting stamp from image fullrun_mos2_xmm0655490301_pi300-10000_cl_sm2.00.img.gz, (243, 223) - (330, 309)
[Fri Dec 23 07:27:54 2011] XMMSAS bgd. selection expression = annulus(24891.591600, 23077.762800, 2512.484072, 5024.968145, X, Y) && !ellipse(28867.329800, 22550.566200, 402.241793, 402.241793, 0.000000, X, Y) && !ellipse(27688.840637, 25015.287201, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 23 07:27:54 2011] Writing fullrun_mos2_xmm0655490301_pi300-10000_pass1_cl_src1.gif
[Fri Dec 23 07:28:00 2011] Mean detx,y = (247.05, 1230.84) 
[Fri Dec 23 07:28:03 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 07:28:32 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 07:28:32 2011] Setting source spectrum file to fullrun_mos2_xmm0655490301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 23 07:28:32 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0655490301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Dec 23 07:45:28 2011] Updating aperture counts using extracted products
[Fri Dec 23 07:45:28 2011] Error reading totcts from fullrun_mos2_xmm0655490301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 23 07:45:29 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 07:45:29 2011] Using photon index=1.80, rate=0.159, arf fullrun_mos2_xmm0655490301_pi300-10000_pass1_cl_src1.arf
[Fri Dec 23 07:45:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 07:45:29 2011] Updating source flux to 1.6e-12
[Fri Dec 23 07:46:16 2011] Flag b found in src. 1 procflags, skipping spectral fitting
[Fri Dec 23 07:46:50 2011] Reading fit data from xmm0655490301/analysis//spectral/fullrun_mos2_xmm0655490301_pi300-10000_pass1_cl_src1_pl.csv
[Fri Dec 23 07:46:50 2011] Spectral fit parameter nH value = 9.14888e+21
[Fri Dec 23 07:46:50 2011] Spectral fit parameter PhoIndex value = 1.28868
[Fri Dec 23 07:46:50 2011] Failed to get F(0.3-8.0) from xmm0655490301/analysis//spectral/fullrun_mos2_xmm0655490301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Dec 23 07:46:50 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 07:46:50 2011] Using Nh = 9.1e+21, photon index=1.29, rate=0.159, arf fullrun_mos2_xmm0655490301_pi300-10000_pass1_cl_src1.arf
[Fri Dec 23 07:46:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 07:46:50 2011] Updating source flux to 3e-12