[Fri Dec 23 02:37:49 2011] Detection parameters: Position = (451.6, 266.9) = 8 25 13.34 -37 37 6.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 43.4 +/- 8.9 Background counts = 9.8 Rate = 0.002 +/- 0.0003 [Fri Dec 23 02:37:49 2011] Off-axis axis estimate = 11.34' [Fri Dec 23 03:30:57 2011] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting [Fri Dec 23 03:30:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri Dec 23 03:30:57 2011] Initial guess for spatial extent in simple fitting = 12.10" [Fri Dec 23 03:30:57 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.975 [Fri Dec 23 03:30:57 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 12.10" [Fri Dec 23 04:00:30 2011] fullrun_mos1_xmm0655490301_pi300-10000_cl_pass0_src8.ximg exists [Fri Dec 23 04:00:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655490301_pi300-10000_cl_pass0_src8.csv [Fri Dec 23 04:00:30 2011] fullrun_mos1_xmm0655490301_pi300-10000_cl_pass0_src8_1.ximg exists [Fri Dec 23 04:00:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655490301_pi300-10000_cl_pass0_src8.csv [Fri Dec 23 04:00:30 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0655490301_pi300-10000_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0655490301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Dec 23 04:00:30 2011] fullrun_mos1_xmm0655490301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Fri Dec 23 04:00:30 2011] fullrun_mos1_xmm0655490301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Fri Dec 23 04:00:30 2011] Fit fullrun_mos1_xmm0655490301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly [Fri Dec 23 04:32:31 2011] Spatial fit model total counts = 143.090000, observed total counts = 142.000000 [Fri Dec 23 04:32:31 2011] Offset between fit and detection position for source 4 = 0.141647 pixels [Fri Dec 23 04:32:31 2011] 141.442000 total counts/ 118.489000 bgd. counts: snr = 2.108630 Spatial fit parameters: Offset between fit and detection position for source 4 = 0.141647 pixels Position = (451.5, 266.9) = 8 25 13.40 -37 37 6.2 Extent = 3.0" x 3.0", rotation angle = 0 Source counts = 23.0 +/- 11.9 Background counts = 118.5 Rate = 0.0009 +/- 0.0005 [Fri Dec 23 04:32:31 2011] Vigneting correction estimate = 1.000000 [Fri Dec 23 04:32:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Dec 23 04:32:31 2011] Assessing source extent using major [Fri Dec 23 04:32:31 2011] Source does appear to be extended [Fri Dec 23 04:32:31 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Dec 23 04:32:31 2011] Deleting source due to low Poisson probability 0.9