[Fri Jun 15 15:13:04 2012] Detection parameters:
  Position = (255.9, 378.0) = 21 7 52.93 3 59 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 420.0 +/- 25.4
  Background counts = 25.2
  Rate = 0.1 +/- 0.007

[Fri Jun 15 15:13:04 2012] Off-axis axis estimate = 6.54'
[Fri Jun 15 15:14:35 2012] Using EEF radius (= 9.70 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 15:14:35 2012] Initial guess for spatial extent in simple fitting = 9.70"
[Fri Jun 15 15:14:35 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.208
[Fri Jun 15 15:14:35 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.70"
[Fri Jun 15 15:24:07 2012] fullrun_pn_xmm0655381001_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 15 15:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655381001_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 15:24:07 2012] fullrun_pn_xmm0655381001_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 15 15:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655381001_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 15:24:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0655381001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0655381001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 15:24:07 2012] fullrun_pn_xmm0655381001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 15 15:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655381001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 15 15:24:07 2012] fullrun_pn_xmm0655381001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 15 15:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655381001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 15 15:24:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0655381001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0655381001_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 15:37:37 2012] Source 3 is offset by -6.851985 and 5.703975 pixels which is larger than
2 X fitted extent = 0.838593 x 0.838593, not incorporating fit results
[Fri Jun 15 15:37:37 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 15:37:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 15:37:37 2012] Assessing source extent using major
[Fri Jun 15 15:37:37 2012] Source does appear to be extended
[Fri Jun 15 15:37:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 15:37:43 2012] Using EEF radius (= 9.70 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 15:37:43 2012] Initial guess for spatial extent in simple fitting = 9.70"
[Fri Jun 15 15:37:43 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.208
[Fri Jun 15 15:37:43 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.70"
[Fri Jun 15 15:49:12 2012] fullrun_pn_xmm0655381001_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 15 15:49:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655381001_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 15:49:12 2012] fullrun_pn_xmm0655381001_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 15 15:49:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655381001_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 15:49:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0655381001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0655381001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 15:49:12 2012] fullrun_pn_xmm0655381001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 15 15:49:12 2012] fullrun_pn_xmm0655381001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 15 15:49:12 2012] Fit fullrun_pn_xmm0655381001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 15 16:05:58 2012] Spatial fit model total counts = 417.501000, observed total counts = 386.000000
[Fri Jun 15 16:05:58 2012] Offset between fit and detection position for source 3 = 0.150223 pixels
[Fri Jun 15 16:05:58 2012] 417.283000 total counts/ 185.833000 bgd. counts: snr = 16.978361
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.150223 pixels
  Position = (255.7, 377.9) = 21 7 52.97 3 59 31.6
  Extent = 6.0 (5.2-6.7)", rotation angle = 0
  Source counts = 231.4 +/- 20.4
  Background counts = 185.8
  Rate = 0.06 +/- 0.005
[Fri Jun 15 16:05:58 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 16:05:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 16:05:58 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 16:05:58 2012] Source does appear to be extended
[Fri Jun 15 16:05:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 16:06:05 2012] XMMSAS src. selection expression = ellipse(22198.700200, 32832.772400, 359.940610, 359.940610, 0.000000, X, Y)
[Fri Jun 15 16:06:05 2012] Writing source region out to fullrun_pn_xmm0655381001_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 15 16:06:05 2012] Extracting stamp from image fullrun_pn_xmm0655381001_pi300-10000_cl_sm2.00.img.gz, (235, 357) - (276, 399)
[Fri Jun 15 16:06:05 2012] XMMSAS bgd. selection expression = annulus(22198.700200, 32832.772400, 599.901017, 1199.802035, X, Y)
[Fri Jun 15 16:06:05 2012] Writing fullrun_pn_xmm0655381001_pi300-10000_pass1_cl_src3.gif
[Fri Jun 15 16:06:47 2012] Mean detx,y = (4381.37, 7133.50) 
[Fri Jun 15 16:06:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 16:06:59 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 16:07:00 2012] Setting source spectrum file to fullrun_pn_xmm0655381001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 15 16:07:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0655381001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun 15 16:25:49 2012] Updating aperture counts using extracted products
[Fri Jun 15 16:25:50 2012] Error reading totcts from fullrun_pn_xmm0655381001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 15 16:25:50 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 16:25:50 2012] Using photon index=1.80, rate=0.0579, arf fullrun_pn_xmm0655381001_pi300-10000_pass1_cl_src3.arf
[Fri Jun 15 16:25:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 16:25:50 2012] Updating source flux to 2.6e-13
[Fri Jun 15 16:26:04 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Fri Jun 15 16:26:15 2012] Reading fit data from xmm0655381001/analysis//spectral/fullrun_pn_xmm0655381001_pi300-10000_pass1_cl_src3_pl.csv
[Fri Jun 15 16:26:15 2012] Spectral fit parameter nH value = 1.63343e+21
[Fri Jun 15 16:26:15 2012] Spectral fit parameter PhoIndex value = 1.67262
[Fri Jun 15 16:26:15 2012] Failed to get F(0.3-8.0) from xmm0655381001/analysis//spectral/fullrun_pn_xmm0655381001_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Jun 15 16:26:15 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 16:26:15 2012] Using Nh = 1.6e+21, photon index=1.67, rate=0.0579, arf fullrun_pn_xmm0655381001_pi300-10000_pass1_cl_src3.arf
[Fri Jun 15 16:26:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 16:26:15 2012] Updating source flux to 3.8e-13