[Fri Dec  2 21:33:46 2011] Detection parameters:
  Position = (313.9, 337.2) = 13 37 28.54 8 54 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.2 +/- 12.6
  Background counts = 18.8
  Rate = 0.005 +/- 0.0009

[Fri Dec  2 21:33:47 2011] Off-axis axis estimate = 3.03'
[Fri Dec  2 22:40:50 2011] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 22:40:50 2011] Initial guess for spatial extent in simple fitting = 7.94"
[Fri Dec  2 22:40:50 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.924
[Fri Dec  2 22:40:50 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 7.94"
[Fri Dec  2 23:01:39 2011] fullrun_mos2_xmm0655380401_pi300-10000_cl_pass0_src6.ximg exists
[Fri Dec  2 23:01:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655380401_pi300-10000_cl_pass0_src6.csv
[Fri Dec  2 23:01:39 2011] fullrun_mos2_xmm0655380401_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Dec  2 23:01:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655380401_pi300-10000_cl_pass0_src6.csv
[Fri Dec  2 23:01:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0655380401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0655380401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec  2 23:01:39 2011] fullrun_mos2_xmm0655380401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Dec  2 23:01:39 2011] fullrun_mos2_xmm0655380401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Dec  2 23:01:39 2011] Fit fullrun_mos2_xmm0655380401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Dec  2 23:01:49 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 10.988752 pixels away
[Fri Dec  2 23:01:49 2011] Vigneting correction estimate = 1.000000
[Fri Dec  2 23:01:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec  2 23:01:49 2011] Assessing source extent using major
[Fri Dec  2 23:01:49 2011] Source does appear to be extended
[Fri Dec  2 23:01:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec  2 23:58:42 2011] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Fri Dec  2 23:58:42 2011] Initial guess for spatial extent in simple fitting = 7.94"
[Fri Dec  2 23:58:42 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.924
[Fri Dec  2 23:58:42 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 7.94"
[Sat Dec  3 00:33:11 2011] fullrun_mos2_xmm0655380401_pi300-10000_cl_pass1_src7.ximg exists
[Sat Dec  3 00:33:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655380401_pi300-10000_cl_pass1_src7.csv
[Sat Dec  3 00:33:11 2011] fullrun_mos2_xmm0655380401_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Dec  3 00:33:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655380401_pi300-10000_cl_pass1_src7.csv
[Sat Dec  3 00:33:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0655380401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0655380401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 00:33:12 2011] fullrun_mos2_xmm0655380401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Dec  3 00:33:12 2011] fullrun_mos2_xmm0655380401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Dec  3 00:33:12 2011] Fit fullrun_mos2_xmm0655380401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Dec  3 00:33:20 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 85.055545 pixels away
[Sat Dec  3 00:33:20 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 10.988752 pixels away
[Sat Dec  3 00:33:20 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 00:33:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 00:33:20 2011] Assessing source extent using major
[Sat Dec  3 00:33:20 2011] Source does appear to be extended
[Sat Dec  3 00:33:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 01:22:48 2011] XMMSAS src. selection expression = ellipse(27257.247040, 29289.523285, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec  3 01:22:48 2011] Writing source region out to fullrun_mos2_xmm0655380401_pi300-10000_pass1_cl_src7_src.reg
[Sat Dec  3 01:22:48 2011] Extracting stamp from image fullrun_mos2_xmm0655380401_pi300-10000_cl_sm2.00.img.gz, (276, 300) - (351, 375)
[Sat Dec  3 01:22:48 2011] XMMSAS bgd. selection expression = annulus(27257.247040, 29289.523285, 1087.500000, 2175.000000, X, Y) && !ellipse(26139.812000, 27918.685400, 589.992817, 589.992817, 0.000000, X, Y) && !ellipse(26748.179220, 27224.472200, 351.974410, 351.974410, 0.000000, X, Y) && !ellipse(25388.045800, 26918.551400, 686.732820, 414.811212, 327.656000, X, Y) && !ellipse(25933.988403, 27705.139862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25137.017639, 27526.530731, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec  3 01:22:48 2011] Writing fullrun_mos2_xmm0655380401_pi300-10000_pass1_cl_src7.gif
[Sat Dec  3 01:24:22 2011] Mean detx,y = (-1452.40, 832.66) 
[Sat Dec  3 01:24:22 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec  3 01:24:32 2011] Binned source spectrum to 10 counts/bin
[Sat Dec  3 01:24:32 2011] Setting source spectrum file to fullrun_mos2_xmm0655380401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Dec  3 01:24:32 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0655380401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Dec  3 01:26:41 2011] Not generating rmf since there are only 80 counts
[Sat Dec  3 01:26:41 2011] rmf not generated due to insufficient counts
[Sat Dec  3 01:27:23 2011] Updating aperture counts using extracted products
[Sat Dec  3 01:27:23 2011] Error reading totcts from fullrun_mos2_xmm0655380401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Dec  3 01:27:23 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec  3 01:27:23 2011] Using photon index=1.80, rate=0.00548, arf fullrun_mos2_xmm0655380401_pi300-10000_pass1_cl_src7.arf
[Sat Dec  3 01:27:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec  3 01:27:23 2011] Updating source flux to 5.4e-14
[Sat Dec  3 01:27:30 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Dec  3 01:27:31 2011] xmm0655380401/analysis//spectral/fullrun_mos2_xmm0655380401_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete