[Sun Dec 25 01:16:27 2011] Detection parameters:
  Position = (313.6, 322.0) = 10 34 33.71 39 38 26.3
  Extent = 43.5" x 43.5", rotation angle = 0 degrees
  Source counts = 344.4 +/- 56.6
  Background counts = 20936.3
  Rate = 0.01 +/- 0.002

[Sun Dec 25 01:16:28 2011] Off-axis axis estimate = 2.03'
[Sun Dec 25 01:37:47 2011] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 01:37:47 2011] Initial guess for spatial extent in simple fitting = 7.44"
[Sun Dec 25 01:37:47 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.023
[Sun Dec 25 01:37:47 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 7.44"
[Sun Dec 25 03:00:13 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src7.ximg exists
[Sun Dec 25 03:00:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src7.csv
[Sun Dec 25 03:00:13 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Dec 25 03:00:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src7.csv
[Sun Dec 25 03:00:13 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 03:00:13 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Dec 25 03:00:13 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Dec 25 03:00:13 2011] Fit fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Dec 25 03:34:45 2011] Source 7 is offset by 7.456863 and -0.057573 pixels which is larger than
2 X fitted extent = 5.409701 x 5.409701, not incorporating fit results
[Sun Dec 25 03:34:45 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 03:34:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 03:34:45 2011] Assessing source extent using major
[Sun Dec 25 03:34:45 2011] Source does appear to be extended
[Sun Dec 25 03:34:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 03:34:45 2011] Source is confused with source 2
[Sun Dec 25 03:34:58 2011] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 03:34:58 2011] Initial guess for spatial extent in simple fitting = 7.44"
[Sun Dec 25 03:34:58 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.023
[Sun Dec 25 03:34:58 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 7.44"
[Sun Dec 25 05:05:10 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_src7.ximg exists
[Sun Dec 25 05:05:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_src7.csv
[Sun Dec 25 05:05:10 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Dec 25 05:05:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_src7.csv
[Sun Dec 25 05:05:10 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 05:05:10 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Dec 25 05:05:10 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Dec 25 05:05:10 2011] Fit fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Dec 25 05:29:52 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 21.771407 pixels away
[Sun Dec 25 05:29:52 2011] Spatial fit model total counts = 20684.900000, observed total counts = 22526.000000
[Sun Dec 25 05:29:52 2011] Offset between fit and detection position for source 7 = 5.961020 pixels
[Sun Dec 25 05:29:52 2011] 16759.730000 total counts/ 11107.400000 bgd. counts: snr = 53.631668
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 5.961020 pixels
  Position = (317.8, 317.7) = 10 34 32.13 39 38 7.2
  Extent = 12.5 (12.5-12.5)", rotation angle = 0
  Source counts = 5652.3 +/- 129.5
  Background counts = 11107.4
  Rate = 0.1 +/- 0.003
[Sun Dec 25 05:29:52 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 05:29:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 05:29:52 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 05:29:52 2011] Source does appear to be extended
[Sun Dec 25 05:29:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 05:30:05 2011] Counts = 5652.330000, rescaling region sizes by 2.000000
[Sun Dec 25 05:30:05 2011] XMMSAS src. selection expression = ellipse(27602.108000, 27594.254000, 1503.144043, 1503.144043, 0.000000, X, Y)
[Sun Dec 25 05:30:05 2011] Writing source region out to fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src7_src.reg
[Sun Dec 25 05:30:05 2011] Extracting stamp from image fullrun_pn_xmm0655310101_pi300-10000_cl_sm2.00.img.gz, (231, 231) - (404, 404)
[Sun Dec 25 05:30:05 2011] XMMSAS bgd. selection expression = annulus(27602.108000, 27594.254000, 5010.480144, 10020.960288, X, Y) && !ellipse(29676.384000, 25770.560600, 374.570672, 374.570672, 0.000000, X, Y) && !ellipse(26064.223840, 27984.341000, 1484.028043, 1462.948842, 347.132553, X, Y) && !ellipse(28603.472000, 29095.249600, 805.704023, 805.704023, 0.000000, X, Y) && !ellipse(27936.730000, 28550.396169, 1275.536037, 1275.536037, 2.349000, X, Y) && !ellipse(24298.518000, 27397.494000, 1132.776033, 1132.776033, 0.000000, X, Y) && !ellipse(25335.090790, 26665.034790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28395.505320, 29097.458000, 1275.536037, 1275.536037, 0.000000, X, Y) && !ellipse(27637.323560, 25086.813400, 1155.504033, 444.003213, 55.697503, X, Y)
[Sun Dec 25 05:30:05 2011] Writing fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src7.gif
[Sun Dec 25 07:02:22 2011] Mean detx,y = (815.56, 420.32) 
[Sun Dec 25 07:02:39 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 07:05:34 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 07:05:35 2011] Setting source spectrum file to fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Dec 25 07:05:35 2011] Setting bgd. spectrum file to fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Dec 25 19:47:05 2011] Updating aperture counts using extracted products
[Sun Dec 25 19:47:05 2011] Error reading totcts from fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Dec 25 19:47:05 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 19:47:05 2011] Using photon index=1.80, rate=0.128, arf fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src7.arf
[Sun Dec 25 19:47:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 19:47:05 2011] Updating source flux to 2.7e-13
[Sun Dec 25 19:47:51 2011] Flag b found in src. 7 procflags, skipping spectral fitting
[Sun Dec 25 19:47:51 2011] Flag c found in src. 7 procflags, skipping spectral fitting