[Sun Dec 25 01:16:27 2011] Detection parameters:
  Position = (328.9, 334.8) = 10 34 27.97 39 39 21.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 295.8 +/- 49.9
  Background counts = 1258.8
  Rate = 0.01 +/- 0.002

[Sun Dec 25 01:16:28 2011] Off-axis axis estimate = 3.44'
[Sun Dec 25 01:37:47 2011] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 01:37:47 2011] Initial guess for spatial extent in simple fitting = 8.15"
[Sun Dec 25 01:37:47 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.110
[Sun Dec 25 01:37:47 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 8.15"
[Sun Dec 25 03:00:13 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Dec 25 03:00:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src3.csv
[Sun Dec 25 03:00:13 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Dec 25 03:00:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src3.csv
[Sun Dec 25 03:00:13 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 03:00:13 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Dec 25 03:00:13 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Dec 25 03:00:13 2011] Fit fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Dec 25 03:34:45 2011] Spatial fit model total counts = 10572.300000, observed total counts = 11301.000000
[Sun Dec 25 03:34:45 2011] Offset between fit and detection position for source 3 = 0.509642 pixels
[Sun Dec 25 03:34:45 2011] 8139.720000 total counts/ 6535.790000 bgd. counts: snr = 19.839758
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.509642 pixels
  Position = (329.3, 335.0) = 10 34 27.79 39 39 22.3
  Extent = 10.1 (10.1-10.7)", rotation angle = 0
  Source counts = 1603.9 +/- 90.2
  Background counts = 6535.8
  Rate = 0.04 +/- 0.002
[Sun Dec 25 03:34:45 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 03:34:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 03:34:45 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 03:34:45 2011] Source does appear to be extended
[Sun Dec 25 03:34:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 03:34:45 2011] Source is confused with source 4
[Sun Dec 25 03:34:45 2011] Source is confused with source 7
[Sun Dec 25 03:34:45 2011] Source is confused with source 8
[Sun Dec 25 03:34:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 03:34:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 25 03:34:58 2011] Initial guess for spatial extent in simple fitting = 10.07"
[Sun Dec 25 03:34:58 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.946
[Sun Dec 25 03:34:58 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 10.07"
[Sun Dec 25 05:05:10 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_src3.ximg exists
[Sun Dec 25 05:05:10 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Dec 25 05:05:10 2011] Fit fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_src3 appears to have run properly
[Sun Dec 25 05:05:10 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Dec 25 05:05:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Dec 25 05:05:10 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Dec 25 05:05:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Dec 25 05:05:10 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 05:29:52 2011] Warning, spatial fit 3 centroid is now closest to src. 4
[Sun Dec 25 05:29:52 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 05:29:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 05:29:52 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 05:29:52 2011] Source does appear to be extended
[Sun Dec 25 05:29:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 05:30:04 2011] Counts = 1603.930000, rescaling region sizes by 2.000000
[Sun Dec 25 05:30:04 2011] XMMSAS src. selection expression = ellipse(28603.472000, 29095.249600, 1208.556035, 1208.556035, 0.000000, X, Y)
[Sun Dec 25 05:30:04 2011] Writing source region out to fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src3_src.reg
[Sun Dec 25 05:30:04 2011] Extracting stamp from image fullrun_pn_xmm0655310101_pi300-10000_cl_sm2.00.img.gz, (260, 266) - (399, 404)
[Sun Dec 25 05:30:04 2011] XMMSAS bgd. selection expression = annulus(28603.472000, 29095.249600, 4028.520116, 8057.040232, X, Y) && !ellipse(29676.384000, 25770.560600, 374.570672, 374.570672, 0.000000, X, Y) && !ellipse(26064.223840, 27984.341000, 1484.028043, 1462.948842, 347.132553, X, Y) && !ellipse(27936.730000, 28550.396169, 1275.536037, 1275.536037, 2.349000, X, Y) && !ellipse(24298.518000, 27397.494000, 1132.776033, 1132.776033, 0.000000, X, Y) && !ellipse(25335.090790, 26665.034790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27602.108000, 27594.254000, 1002.096029, 1002.096029, 0.000000, X, Y) && !ellipse(28395.505320, 29097.458000, 1275.536037, 1275.536037, 0.000000, X, Y) && !ellipse(27637.323560, 25086.813400, 1155.504033, 444.003213, 55.697503, X, Y)
[Sun Dec 25 05:30:04 2011] Writing fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src3.gif
[Sun Dec 25 06:09:24 2011] Mean detx,y = (2396.08, 12.38) 
[Sun Dec 25 06:09:53 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 06:12:41 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 06:12:42 2011] Setting source spectrum file to fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 25 06:12:42 2011] Setting bgd. spectrum file to fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Dec 25 19:47:04 2011] Updating aperture counts using extracted products
[Sun Dec 25 19:47:04 2011] Error reading totcts from fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 25 19:47:05 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 19:47:05 2011] Using photon index=1.80, rate=0.0363, arf fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src3.arf
[Sun Dec 25 19:47:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 19:47:05 2011] Updating source flux to 9e-14
[Sun Dec 25 19:47:51 2011] Flag c found in src. 3 procflags, skipping spectral fitting