[Sun Dec 25 01:16:27 2011] Detection parameters:
  Position = (341.7, 296.9) = 10 34 23.16 39 36 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 624.5 +/- 54.4
  Background counts = 1221.7
  Rate = 0.02 +/- 0.002

[Sun Dec 25 01:16:28 2011] Off-axis axis estimate = 3.14'
[Sun Dec 25 01:37:47 2011] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 01:37:47 2011] Initial guess for spatial extent in simple fitting = 8.00"
[Sun Dec 25 01:37:47 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.915
[Sun Dec 25 01:37:47 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 8.00"
[Sun Dec 25 03:00:12 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Dec 25 03:00:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src1.csv
[Sun Dec 25 03:00:12 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Dec 25 03:00:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src1.csv
[Sun Dec 25 03:00:12 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 03:00:13 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 25 03:00:13 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 25 03:00:13 2011] Fit fullrun_pn_xmm0655310101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 25 03:34:45 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.965603 pixels away
[Sun Dec 25 03:34:45 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 03:34:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 03:34:45 2011] Assessing source extent using major
[Sun Dec 25 03:34:45 2011] Source does appear to be extended
[Sun Dec 25 03:34:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 03:34:58 2011] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 03:34:58 2011] Initial guess for spatial extent in simple fitting = 8.00"
[Sun Dec 25 03:34:58 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.915
[Sun Dec 25 03:34:58 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 8.00"
[Sun Dec 25 05:05:10 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Dec 25 05:05:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 05:05:10 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Dec 25 05:05:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 05:05:10 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 05:05:10 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 25 05:05:10 2011] fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 25 05:05:10 2011] Fit fullrun_pn_xmm0655310101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Dec 25 05:29:52 2011] Spatial fit model total counts = 12859.000000, observed total counts = 12859.000000
[Sun Dec 25 05:29:52 2011] Offset between fit and detection position for source 1 = 0.147911 pixels
[Sun Dec 25 05:29:52 2011] 12802.157000 total counts/ 12403.300000 bgd. counts: snr = 3.581365
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.147911 pixels
  Position = (341.7, 296.8) = 10 34 23.16 39 36 36.0
  Extent = 4.7 (3.7-5.7)", rotation angle = 0
  Source counts = 398.9 +/- 113.1
  Background counts = 12403.3
  Rate = 0.009 +/- 0.003
[Sun Dec 25 05:29:52 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 05:29:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 05:29:52 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 05:29:52 2011] Source does appear to be extended
[Sun Dec 25 05:29:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 05:30:04 2011] XMMSAS src. selection expression = ellipse(29676.384000, 25770.560600, 280.928004, 280.928004, 0.000000, X, Y)
[Sun Dec 25 05:30:04 2011] Writing source region out to fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src1_src.reg
[Sun Dec 25 05:30:04 2011] Extracting stamp from image fullrun_pn_xmm0655310101_pi300-10000_cl_sm2.00.img.gz, (326, 281) - (358, 313)
[Sun Dec 25 05:30:04 2011] XMMSAS bgd. selection expression = annulus(29676.384000, 25770.560600, 468.213340, 936.426681, X, Y) && !ellipse(27637.323560, 25086.813400, 1155.504033, 444.003213, 55.697503, X, Y)
[Sun Dec 25 05:30:04 2011] Writing fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src1.gif
[Sun Dec 25 05:43:29 2011] Mean detx,y = (2187.03, 3372.67) 
[Sun Dec 25 05:44:01 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 05:44:30 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 05:44:32 2011] Setting source spectrum file to fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 25 05:44:32 2011] Setting bgd. spectrum file to fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Dec 25 19:47:04 2011] Updating aperture counts using extracted products
[Sun Dec 25 19:47:04 2011] Error reading totcts from fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 25 19:47:05 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 19:47:05 2011] Using photon index=1.80, rate=0.00903, arf fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src1.arf
[Sun Dec 25 19:47:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 19:47:05 2011] Updating source flux to 3.4e-14
[Sun Dec 25 19:51:57 2011] Reading fit data from xmm0655310101/analysis//spectral/fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Dec 25 19:51:57 2011] Spectral fit parameter nH value = 5.11092e+20
[Sun Dec 25 19:51:57 2011] Spectral fit parameter PhoIndex value = 1.73421
[Sun Dec 25 19:51:57 2011] Failed to get F(0.3-8.0) from xmm0655310101/analysis//spectral/fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Dec 25 19:51:57 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 19:51:57 2011] Using Nh = 5.1e+20, photon index=1.73, rate=0.00903, arf fullrun_pn_xmm0655310101_pi300-10000_pass1_cl_src1.arf
[Sun Dec 25 19:51:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 19:51:57 2011] Updating source flux to 4.1e-14