[Sun Dec 25 01:17:25 2011] Detection parameters:
  Position = (449.0, 197.9) = 10 33 42.83 39 29 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 273.9 +/- 25.8
  Background counts = 115.4
  Rate = 0.006 +/- 0.0006

[Sun Dec 25 01:17:25 2011] Off-axis axis estimate = 13.13'
[Sun Dec 25 03:06:18 2011] Using EEF radius (= 12.99 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 03:06:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 25 03:06:18 2011] Initial guess for spatial extent in simple fitting = 12.99"
[Sun Dec 25 03:06:18 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.008
[Sun Dec 25 03:06:18 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 12.99"
[Sun Dec 25 03:34:40 2011] fullrun_mos2_xmm0655310101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Dec 25 03:34:40 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0655310101_pi300-10000_cl_pass0_src3.csv
[Sun Dec 25 03:34:40 2011] fullrun_mos2_xmm0655310101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Dec 25 03:34:40 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0655310101_pi300-10000_cl_pass0_src3.csv
[Sun Dec 25 03:34:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0655310101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0655310101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 03:34:40 2011] fullrun_mos2_xmm0655310101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Dec 25 03:34:40 2011] fullrun_mos2_xmm0655310101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Dec 25 03:34:40 2011] Fit fullrun_mos2_xmm0655310101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Dec 25 03:34:49 2011] Spatial fit model total counts = 261.779000, observed total counts = 262.000000
[Sun Dec 25 03:34:49 2011] Offset between fit and detection position for source 3 = 0.641701 pixels
[Sun Dec 25 03:34:49 2011] 260.704200 total counts/ 165.461000 bgd. counts: snr = 7.404337
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.641701 pixels
  Position = (448.6, 197.5) = 10 33 43.00 39 29 23.2
  Extent = 5.5 (4.6-6.7)", rotation angle = 0
  Source counts = 95.2 +/- 16.1
  Background counts = 165.5
  Rate = 0.004 +/- 0.0006
[Sun Dec 25 03:34:49 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 03:34:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 03:34:49 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 03:34:49 2011] Source does appear to be extended
[Sun Dec 25 03:34:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 05:11:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 05:11:40 2011] Initial guess for spatial extent in simple fitting = 5.46"
[Sun Dec 25 05:11:40 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.730
[Sun Dec 25 05:11:40 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 5.46"
[Sun Dec 25 05:29:48 2011] fullrun_mos2_xmm0655310101_pi300-10000_cl_pass1_src3.ximg exists
[Sun Dec 25 05:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655310101_pi300-10000_cl_pass1_src3.csv
[Sun Dec 25 05:29:48 2011] fullrun_mos2_xmm0655310101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Dec 25 05:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655310101_pi300-10000_cl_pass1_src3.csv
[Sun Dec 25 05:29:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0655310101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0655310101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 05:29:48 2011] fullrun_mos2_xmm0655310101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Dec 25 05:29:48 2011] fullrun_mos2_xmm0655310101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Dec 25 05:29:48 2011] Fit fullrun_mos2_xmm0655310101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Dec 25 05:29:56 2011] Spatial fit model total counts = 241.999000, observed total counts = 242.000000
[Sun Dec 25 05:29:56 2011] Offset between fit and detection position for source 3 = 0.006078 pixels
[Sun Dec 25 05:29:56 2011] 242.191100 total counts/ 150.715000 bgd. counts: snr = 7.451255
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.006078 pixels
  Position = (448.6, 197.5) = 10 33 43.00 39 29 23.2
  Extent = 5.3 (4.4-6.4)", rotation angle = 0
  Source counts = 91.5 +/- 15.6
  Background counts = 150.7
  Rate = 0.004 +/- 0.0006
[Sun Dec 25 05:29:56 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 05:29:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 05:29:56 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 05:29:56 2011] Source does appear to be extended
[Sun Dec 25 05:29:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 19:11:11 2011] XMMSAS src. selection expression = ellipse(38980.249400, 17131.194200, 316.363809, 316.363809, 0.000000, X, Y)
[Sun Dec 25 19:11:11 2011] Writing source region out to fullrun_mos2_xmm0655310101_pi300-10000_pass1_cl_src3_src.reg
[Sun Dec 25 19:11:11 2011] Extracting stamp from image fullrun_mos2_xmm0655310101_pi300-10000_cl_sm2.00.img.gz, (430, 179) - (467, 216)
[Sun Dec 25 19:11:11 2011] XMMSAS bgd. selection expression = annulus(38980.249400, 17131.194200, 527.273015, 1054.546030, X, Y)
[Sun Dec 25 19:11:11 2011] Writing fullrun_mos2_xmm0655310101_pi300-10000_pass1_cl_src3.gif
[Sun Dec 25 19:21:23 2011] Mean detx,y = (-6310.64, -15469.90) 
[Sun Dec 25 19:21:26 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 19:21:51 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 19:21:51 2011] Setting source spectrum file to fullrun_mos2_xmm0655310101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 25 19:21:51 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0655310101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Dec 25 19:42:59 2011] Not generating rmf since there are only 91 counts
[Sun Dec 25 19:42:59 2011] rmf not generated due to insufficient counts
[Sun Dec 25 19:47:06 2011] Updating aperture counts using extracted products
[Sun Dec 25 19:47:06 2011] Error reading totcts from fullrun_mos2_xmm0655310101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 25 19:47:07 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 19:47:07 2011] Using photon index=1.80, rate=0.0035, arf fullrun_mos2_xmm0655310101_pi300-10000_pass1_cl_src3.arf
[Sun Dec 25 19:47:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 19:47:07 2011] Updating source flux to 1.3e-13
[Sun Dec 25 19:47:29 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting