[Sat Nov 26 03:52:42 2011] Detection parameters:
  Position = (251.3, 416.7) = 21 3 52.71 -18 12 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.9 +/- 13.9
  Background counts = 50.1
  Rate = 0.0008 +/- 0.0002

[Sat Nov 26 03:52:43 2011] Off-axis axis estimate = 9.23'
[Sat Nov 26 12:07:19 2011] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 12:07:19 2011] Initial guess for spatial extent in simple fitting = 11.04"
[Sat Nov 26 12:07:19 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.975
[Sat Nov 26 12:07:19 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 11.04"
[Sat Nov 26 14:36:24 2011] fullrun_mos2_xmm0655090401_pi300-10000_cl_pass0_src41.ximg exists
[Sat Nov 26 14:36:24 2011] fullrun_mos2_xmm0655090401_pi300-10000_cl_pass0_src41_1.ximg exists
[Sat Nov 26 14:36:24 2011] Fit fullrun_mos2_xmm0655090401_pi300-10000_cl_pass0_src41 appears to have run properly
[Sat Nov 26 14:36:25 2011] fullrun_mos2_xmm0655090401_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sat Nov 26 14:36:25 2011] fullrun_mos2_xmm0655090401_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sat Nov 26 14:36:25 2011] Fit fullrun_mos2_xmm0655090401_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Sat Nov 26 14:37:23 2011] Source 23 is offset by -9.853749 and -0.394543 pixels which is larger than
2 X fitted extent = 1.269393 x 1.269393, not incorporating fit results
[Sat Nov 26 14:37:23 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 14:37:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 14:37:23 2011] Assessing source extent using major
[Sat Nov 26 14:37:23 2011] Source does appear to be extended
[Sat Nov 26 14:37:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 21:50:02 2011] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 21:50:02 2011] Initial guess for spatial extent in simple fitting = 11.04"
[Sat Nov 26 21:50:02 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.975
[Sat Nov 26 21:50:02 2011] Giving source the simple spatial ID 36 for pass 1, mean size = 11.04"
[Sun Nov 27 00:12:27 2011] fullrun_mos2_xmm0655090401_pi300-10000_cl_pass1_src36.ximg exists
[Sun Nov 27 00:12:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655090401_pi300-10000_cl_pass1_src36.csv
[Sun Nov 27 00:12:27 2011] fullrun_mos2_xmm0655090401_pi300-10000_cl_pass1_src36_1.ximg exists
[Sun Nov 27 00:12:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655090401_pi300-10000_cl_pass1_src36.csv
[Sun Nov 27 00:12:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0655090401_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0655090401_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 00:12:28 2011] fullrun_mos2_xmm0655090401_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Sun Nov 27 00:12:28 2011] fullrun_mos2_xmm0655090401_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Sun Nov 27 00:12:28 2011] Fit fullrun_mos2_xmm0655090401_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Sun Nov 27 00:13:24 2011] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 12.986726 pixels away
[Sun Nov 27 00:13:24 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 00:13:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 00:13:24 2011] Assessing source extent using major
[Sun Nov 27 00:13:24 2011] Source does appear to be extended
[Sun Nov 27 00:13:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 04:30:23 2011] XMMSAS src. selection expression = ellipse(21814.537872, 36200.198151, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Nov 27 04:30:23 2011] Writing source region out to fullrun_mos2_xmm0655090401_pi300-10000_pass1_cl_src23_src.reg
[Sun Nov 27 04:30:23 2011] Extracting stamp from image fullrun_mos2_xmm0655090401_pi300-10000_cl_sm2.00.img.gz, (214, 379) - (289, 454)
[Sun Nov 27 04:30:23 2011] XMMSAS bgd. selection expression = annulus(21814.537872, 36200.198151, 1087.500000, 2175.000000, X, Y) && !ellipse(22944.656800, 35295.082600, 588.300817, 588.300817, 0.000000, X, Y) && !ellipse(23649.458000, 38255.414000, 1893.264054, 969.864028, 30.940600, X, Y) && !ellipse(23330.602081, 38625.739990, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Nov 27 04:30:23 2011] Writing fullrun_mos2_xmm0655090401_pi300-10000_pass1_cl_src23.gif
[Sun Nov 27 04:58:07 2011] Mean detx,y = (9427.62, 5888.08) 
[Sun Nov 27 04:58:10 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 04:58:54 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 04:58:55 2011] Setting source spectrum file to fullrun_mos2_xmm0655090401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun Nov 27 04:58:55 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0655090401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sun Nov 27 05:42:20 2011] Not generating rmf since there are only 57 counts
[Sun Nov 27 05:42:20 2011] rmf not generated due to insufficient counts
[Sun Nov 27 05:46:21 2011] Updating aperture counts using extracted products
[Sun Nov 27 05:46:21 2011] Error reading totcts from fullrun_mos2_xmm0655090401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun Nov 27 05:46:23 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 05:46:23 2011] Using photon index=1.80, rate=0.000799, arf fullrun_mos2_xmm0655090401_pi300-10000_pass1_cl_src23.arf
[Sun Nov 27 05:46:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 05:46:23 2011] Updating source flux to 1.7e-14
[Sun Nov 27 05:49:16 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting