[Sat Nov 26 03:51:53 2011] Detection parameters:
  Position = (157.4, 312.4) = 21 4 21.42 -18 20 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.4 +/- 14.1
  Background counts = 33.5
  Rate = 0.001 +/- 0.0002

[Sat Nov 26 03:51:55 2011] Off-axis axis estimate = 10.28'
[Sat Nov 26 05:54:01 2011] Using EEF radius (= 11.57 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 05:54:01 2011] Initial guess for spatial extent in simple fitting = 11.57"
[Sat Nov 26 05:54:01 2011] source mask rpix=2.7, npix_max = 39, mask sum = 49, frac = 1.227
[Sat Nov 26 05:54:01 2011] Giving source the simple spatial ID 45 for pass 0, mean size = 11.57"
[Sat Nov 26 12:07:15 2011] fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_src45.ximg exists
[Sat Nov 26 12:07:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_src45.csv
[Sat Nov 26 12:07:15 2011] fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_src45_1.ximg exists
[Sat Nov 26 12:07:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_src45.csv
[Sat Nov 26 12:07:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 12:07:18 2011] fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sat Nov 26 12:07:18 2011] fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sat Nov 26 12:07:18 2011] Fit fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Sat Nov 26 14:37:08 2011] Warning, spatial fit 45 centroid is now closest to src. 45
[Sat Nov 26 14:37:08 2011] Spatial fit model total counts = 261.659000, observed total counts = 260.000000
[Sat Nov 26 14:37:08 2011] Offset between fit and detection position for source 47 = 2.840667 pixels
[Sat Nov 26 14:37:08 2011] Warning, changing simple spatial fit ID from 45 to 51
[Sat Nov 26 14:37:08 2011] 275.031300 total counts/ 186.074000 bgd. counts: snr = 6.521369
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 2.840667 pixels
  Position = (155.3, 314.3) = 21 4 22.06 -18 20 2.7
  Extent = 22.6 (21.1-23.3)", rotation angle = 0
  Source counts = 89.0 +/- 16.6
  Background counts = 186.1
  Rate = 0.001 +/- 0.0003
[Sat Nov 26 14:37:09 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 14:37:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 14:37:09 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 14:37:09 2011] Source does appear to be extended
[Sat Nov 26 14:37:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 14:37:09 2011] Source is confused with source 45
[Sat Nov 26 14:37:09 2011] Source is confused with source 44
[Sat Nov 26 16:28:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 16:28:54 2011] Initial guess for spatial extent in simple fitting = 22.55"
[Sat Nov 26 16:28:54 2011] source mask rpix=5.2, npix_max = 129, mask sum = 121, frac = 0.936
[Sat Nov 26 16:28:54 2011] Giving source the simple spatial ID 39 for pass 1, mean size = 22.55"
[Sat Nov 26 21:49:59 2011] fullrun_mos1_xmm0655090401_pi300-10000_cl_pass1_src39.ximg exists
[Sat Nov 26 21:49:59 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0655090401_pi300-10000_cl_pass1_src39.csv
[Sat Nov 26 21:49:59 2011] fullrun_mos1_xmm0655090401_pi300-10000_cl_pass1_src39_1.ximg exists
[Sat Nov 26 21:49:59 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0655090401_pi300-10000_cl_pass1_src39.csv
[Sat Nov 26 21:49:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0655090401_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0655090401_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 21:50:01 2011] fullrun_mos1_xmm0655090401_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sat Nov 26 21:50:01 2011] fullrun_mos1_xmm0655090401_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sat Nov 26 21:50:01 2011] Fit fullrun_mos1_xmm0655090401_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Sun Nov 27 00:13:10 2011] Warning, spatial fit 39 centroid is now closest to src. 49
[Sun Nov 27 00:13:11 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 00:13:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 00:13:11 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 00:13:11 2011] Source does appear to be extended
[Sun Nov 27 00:13:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 02:55:37 2011] XMMSAS src. selection expression = ellipse(13459.140800, 27297.128000, 1353.102039, 1353.102039, 0.000000, X, Y)
[Sun Nov 27 02:55:37 2011] Writing source region out to fullrun_mos1_xmm0655090401_pi300-10000_pass1_cl_src47_src.reg
[Sun Nov 27 02:55:37 2011] Extracting stamp from image fullrun_mos1_xmm0655090401_pi300-10000_cl_sm2.00.img.gz, (77, 237) - (233, 392)
[Sun Nov 27 02:55:37 2011] XMMSAS bgd. selection expression = annulus(13459.140800, 27297.128000, 2255.170065, 4510.340130, X, Y) && !ellipse(13985.386800, 22559.006240, 722.411221, 722.411221, 0.000000, X, Y) && !ellipse(15120.597031, 26162.071350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15421.044000, 23174.759000, 1697.552049, 1697.552049, 0.000000, X, Y) && !ellipse(18688.605942, 22943.756348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13608.990616, 23254.901886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15844.624847, 24320.550995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15911.246000, 22729.368000, 1749.832050, 1749.832050, 0.000000, X, Y) && !ellipse(13710.828000, 27885.836000, 1831.424053, 1831.424053, 0.000000, X, Y) && !ellipse(14502.749146, 25840.082672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13604.372192, 24723.281769, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Nov 27 02:55:37 2011] Writing fullrun_mos1_xmm0655090401_pi300-10000_pass1_cl_src47.gif
[Sun Nov 27 03:18:44 2011] Mean detx,y = (-5331.07, -12980.62) 
[Sun Nov 27 03:18:47 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 03:19:52 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 03:19:52 2011] Setting source spectrum file to fullrun_mos1_xmm0655090401_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sun Nov 27 03:19:52 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0655090401_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Sun Nov 27 04:08:27 2011] Not generating rmf since there are only 88 counts
[Sun Nov 27 04:08:27 2011] rmf not generated due to insufficient counts
[Sun Nov 27 05:46:14 2011] Updating aperture counts using extracted products
[Sun Nov 27 05:46:14 2011] Error reading totcts from fullrun_mos1_xmm0655090401_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sun Nov 27 05:46:17 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 05:46:17 2011] Using photon index=1.80, rate=0.00138, arf fullrun_mos1_xmm0655090401_pi300-10000_pass1_cl_src47.arf
[Sun Nov 27 05:46:17 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 05:46:17 2011] Updating source flux to 3.2e-14
[Sun Nov 27 05:46:26 2011] Flag c found in src. 47 procflags, skipping spectral fitting
[Sun Nov 27 05:46:26 2011] Source 47 has fewer than 100.000000 counts, skipping spectral fitting