[Sat Nov 26 03:51:51 2011] Detection parameters:
  Position = (455.3, 252.1) = 21 2 50.38 -18 24 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1860.0 +/- 53.9
  Background counts = 84.5
  Rate = 0.03 +/- 0.0007

[Sat Nov 26 03:51:55 2011] Off-axis axis estimate = 11.86'
[Sat Nov 26 05:54:01 2011] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 05:54:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Nov 26 05:54:01 2011] Initial guess for spatial extent in simple fitting = 12.36"
[Sat Nov 26 05:54:01 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.941
[Sat Nov 26 05:54:01 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 12.36"
[Sat Nov 26 12:07:14 2011] fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Nov 26 12:07:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_src1.csv
[Sat Nov 26 12:07:14 2011] fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Nov 26 12:07:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_src1.csv
[Sat Nov 26 12:07:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 12:07:16 2011] fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Nov 26 12:07:16 2011] fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Nov 26 12:07:16 2011] Fit fullrun_mos1_xmm0655090401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Nov 26 14:37:08 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.230926 pixels away
[Sat Nov 26 14:37:09 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 14:37:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 14:37:09 2011] Assessing source extent using major
[Sat Nov 26 14:37:09 2011] Source does appear to be extended
[Sat Nov 26 14:37:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 16:28:54 2011] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 16:28:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Nov 26 16:28:54 2011] Initial guess for spatial extent in simple fitting = 12.36"
[Sat Nov 26 16:28:54 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.941
[Sat Nov 26 16:28:54 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 12.36"
[Sat Nov 26 21:49:58 2011] fullrun_mos1_xmm0655090401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Nov 26 21:49:58 2011] fullrun_mos1_xmm0655090401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Nov 26 21:49:58 2011] Fit fullrun_mos1_xmm0655090401_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Nov 26 21:50:00 2011] fullrun_mos1_xmm0655090401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Nov 26 21:50:00 2011] fullrun_mos1_xmm0655090401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Nov 26 21:50:00 2011] Fit fullrun_mos1_xmm0655090401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Nov 27 00:13:10 2011] Spatial fit model total counts = 2075.920000, observed total counts = 2076.000000
[Sun Nov 27 00:13:10 2011] Offset between fit and detection position for source 1 = 0.264966 pixels
[Sun Nov 27 00:13:10 2011] 2074.145000 total counts/ 910.155000 bgd. counts: snr = 38.582607
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.264966 pixels
  Position = (455.0, 252.2) = 21 2 50.45 -18 24 32.8
  Extent = 6.6 (6.3-7.0)", rotation angle = 0
  Source counts = 1164.0 +/- 45.5
  Background counts = 910.2
  Rate = 0.02 +/- 0.0007
[Sun Nov 27 00:13:11 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 00:13:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 00:13:11 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 00:13:11 2011] Source does appear to be extended
[Sun Nov 27 00:13:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 02:55:36 2011] Counts = 1163.990000, rescaling region sizes by 2.000000
[Sun Nov 27 02:55:36 2011] XMMSAS src. selection expression = ellipse(39540.447800, 21893.326200, 794.503223, 794.503223, 0.000000, X, Y)
[Sun Nov 27 02:55:36 2011] Writing source region out to fullrun_mos1_xmm0655090401_pi300-10000_pass1_cl_src1_src.reg
[Sun Nov 27 02:55:36 2011] Extracting stamp from image fullrun_mos1_xmm0655090401_pi300-10000_cl_sm2.00.img.gz, (409, 207) - (501, 298)
[Sun Nov 27 02:55:36 2011] XMMSAS bgd. selection expression = annulus(39540.447800, 21893.326200, 2648.344076, 5296.688152, X, Y) && !ellipse(33868.301849, 15878.816315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36565.941711, 23204.942200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43608.762695, 25387.479828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44057.945862, 15859.392120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(45015.235400, 16768.641680, 1030.392030, 1030.392030, 0.000000, X, Y) && !ellipse(32580.442000, 13224.238000, 3827.792110, 3827.792110, 0.000000, X, Y)
[Sun Nov 27 02:55:36 2011] Writing fullrun_mos1_xmm0655090401_pi300-10000_pass1_cl_src1.gif
[Sun Nov 27 02:55:47 2011] Mean detx,y = (861.05, 11814.67) 
[Sun Nov 27 02:55:50 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 02:57:37 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 02:57:38 2011] Setting source spectrum file to fullrun_mos1_xmm0655090401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Nov 27 02:57:38 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0655090401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Nov 27 05:46:11 2011] Updating aperture counts using extracted products
[Sun Nov 27 05:46:12 2011] Error reading totcts from fullrun_mos1_xmm0655090401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Nov 27 05:46:16 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 05:46:16 2011] Using photon index=1.80, rate=0.0181, arf fullrun_mos1_xmm0655090401_pi300-10000_pass1_cl_src1.arf
[Sun Nov 27 05:46:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 05:46:16 2011] Updating source flux to 3.1e-13
[Sun Nov 27 05:49:16 2011] Reading fit data from xmm0655090401/analysis//spectral/fullrun_mos1_xmm0655090401_pi300-10000_pass1_cl_src1_pl.csv
[Sun Nov 27 05:49:16 2011] Spectral fit parameter nH value = 5.36297e+20
[Sun Nov 27 05:49:16 2011] Spectral fit parameter PhoIndex value = 2.20356
[Sun Nov 27 05:49:16 2011] Failed to get F(0.3-8.0) from xmm0655090401/analysis//spectral/fullrun_mos1_xmm0655090401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Nov 27 05:49:16 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 05:49:16 2011] Using Nh = 5.4e+20, photon index=2.20, rate=0.0181, arf fullrun_mos1_xmm0655090401_pi300-10000_pass1_cl_src1.arf
[Sun Nov 27 05:49:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 05:49:16 2011] Updating source flux to 2.8e-13