[Wed May  2 11:31:08 2012] Detection parameters:
  Position = (225.4, 215.8) = 0 15 48.17 -39 18 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.5 +/- 21.0
  Background counts = 84.1
  Rate = 0.002 +/- 0.0002

[Wed May  2 11:31:09 2012] Off-axis axis estimate = 7.99'
[Wed May  2 22:25:24 2012] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Wed May  2 22:25:24 2012] Initial guess for spatial extent in simple fitting = 10.43"
[Wed May  2 22:25:24 2012] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.745
[Wed May  2 22:25:24 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 10.43"
[Thu May  3 03:01:15 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src37.ximg exists
[Thu May  3 03:01:15 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu May  3 03:01:15 2012] Fit fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src37 appears to have run properly
[Thu May  3 03:01:17 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu May  3 03:01:17 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu May  3 03:01:17 2012] Fit fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Thu May  3 03:02:39 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 12.456953 pixels away
[Thu May  3 03:02:39 2012] Vigneting correction estimate = 1.000000
[Thu May  3 03:02:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 03:02:39 2012] Assessing source extent using major
[Thu May  3 03:02:39 2012] Source does appear to be extended
[Thu May  3 03:02:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 15:15:00 2012] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Thu May  3 15:15:00 2012] Initial guess for spatial extent in simple fitting = 10.43"
[Thu May  3 15:15:00 2012] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.745
[Thu May  3 15:15:00 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 10.43"
[Thu May  3 21:14:06 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src37.ximg exists
[Thu May  3 21:14:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src37.csv
[Thu May  3 21:14:06 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src37_1.ximg exists
[Thu May  3 21:14:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src37.csv
[Thu May  3 21:14:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 21:14:08 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Thu May  3 21:14:08 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Thu May  3 21:14:08 2012] Fit fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Thu May  3 21:15:29 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 14.134930 pixels away
[Thu May  3 21:15:30 2012] Vigneting correction estimate = 1.000000
[Thu May  3 21:15:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 21:15:30 2012] Assessing source extent using major
[Thu May  3 21:15:30 2012] Source does appear to be extended
[Thu May  3 21:15:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 12:28:21 2012] XMMSAS src. selection expression = ellipse(19562.054825, 18729.263733, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 12:28:21 2012] Writing source region out to fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src61_src.reg
[Fri May  4 12:28:21 2012] Extracting stamp from image fullrun_mos2_xmm0655050101_pi300-10000_cl_sm2.00.img.gz, (188, 178) - (263, 253)
[Fri May  4 12:28:21 2012] XMMSAS bgd. selection expression = annulus(19562.054825, 18729.263733, 1087.500000, 2175.000000, X, Y) && !ellipse(16939.418213, 18225.015259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20466.795883, 16340.334747, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 12:28:21 2012] Writing fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src61.gif
[Fri May  4 13:21:41 2012] Mean detx,y = (436.83, 7930.85) 
[Fri May  4 13:21:45 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 13:22:49 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 13:22:50 2012] Setting source spectrum file to fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Fri May  4 13:22:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Fri May  4 15:46:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 15:46:23 2012] rmf not generated due to insufficient counts
[Fri May  4 16:22:23 2012] Updating aperture counts using extracted products
[Fri May  4 16:22:23 2012] Error reading totcts from fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Fri May  4 16:22:29 2012] Calculating source flux in energy range 0.30-8.00
[Fri May  4 16:22:29 2012] Using photon index=1.80, rate=0.00163, arf fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src61.arf
[Fri May  4 16:22:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  4 16:22:29 2012] Updating source flux to 3e-14
[Fri May  4 16:27:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting