[Wed May  2 11:31:06 2012] Detection parameters:
  Position = (351.4, 299.1) = 0 15 0.98 -39 12 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.8 +/- 22.0
  Background counts = 103.1
  Rate = 0.002 +/- 0.0002

[Wed May  2 11:31:09 2012] Off-axis axis estimate = 3.84'
[Wed May  2 22:25:24 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Wed May  2 22:25:24 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Wed May  2 22:25:24 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.854
[Wed May  2 22:25:24 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 8.35"
[Thu May  3 03:01:15 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src34.ximg exists
[Thu May  3 03:01:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src34.csv
[Thu May  3 03:01:15 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src34_1.ximg exists
[Thu May  3 03:01:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src34.csv
[Thu May  3 03:01:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 03:01:17 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Thu May  3 03:01:17 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Thu May  3 03:01:17 2012] Fit fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Thu May  3 03:02:39 2012] Spatial fit model total counts = 1033.930000, observed total counts = 1036.000000
[Thu May  3 03:02:39 2012] Offset between fit and detection position for source 46 = 0.140555 pixels
[Thu May  3 03:02:39 2012] 1005.910000 total counts/ 881.673000 bgd. counts: snr = 4.184053
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.140555 pixels
  Position = (351.5, 299.2) = 0 15 0.94 -39 12 42.0
  Extent = 7.2 (5.6-9.2)", rotation angle = 0
  Source counts = 124.2 +/- 31.7
  Background counts = 881.7
  Rate = 0.001 +/- 0.0003
[Thu May  3 03:02:39 2012] Vigneting correction estimate = 1.000000
[Thu May  3 03:02:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 03:02:39 2012] Assessing source extent using major axis lower bound
[Thu May  3 03:02:39 2012] Source does appear to be extended
[Thu May  3 03:02:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 15:15:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  3 15:15:00 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Thu May  3 15:15:00 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.071
[Thu May  3 15:15:00 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 7.22"
[Thu May  3 21:14:06 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src34.ximg exists
[Thu May  3 21:14:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src34.csv
[Thu May  3 21:14:06 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src34_1.ximg exists
[Thu May  3 21:14:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src34.csv
[Thu May  3 21:14:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 21:14:08 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Thu May  3 21:14:08 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Thu May  3 21:14:08 2012] Fit fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Thu May  3 21:15:29 2012] Spatial fit model total counts = 1036.850000, observed total counts = 1036.000000
[Thu May  3 21:15:29 2012] Offset between fit and detection position for source 46 = 0.096325 pixels
[Thu May  3 21:15:29 2012] 993.384000 total counts/ 858.108000 bgd. counts: snr = 4.617956
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.096325 pixels
  Position = (351.4, 299.2) = 0 15 0.97 -39 12 41.8
  Extent = 7.7 (5.6-9.8)", rotation angle = 0
  Source counts = 135.3 +/- 31.5
  Background counts = 858.1
  Rate = 0.001 +/- 0.0003
[Thu May  3 21:15:30 2012] Vigneting correction estimate = 1.000000
[Thu May  3 21:15:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 21:15:30 2012] Assessing source extent using major axis lower bound
[Thu May  3 21:15:30 2012] Source does appear to be extended
[Thu May  3 21:15:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 12:28:21 2012] XMMSAS src. selection expression = ellipse(30524.166400, 25981.194800, 463.269613, 463.269613, 0.000000, X, Y)
[Fri May  4 12:28:21 2012] Writing source region out to fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src46_src.reg
[Fri May  4 12:28:21 2012] Extracting stamp from image fullrun_mos2_xmm0655050101_pi300-10000_cl_sm2.00.img.gz, (325, 273) - (378, 326)
[Fri May  4 12:28:21 2012] XMMSAS bgd. selection expression = annulus(30524.166400, 25981.194800, 772.116022, 1544.232044, X, Y) && !ellipse(31481.968000, 27214.014000, 333.204810, 333.204810, 0.000000, X, Y) && !ellipse(29848.861200, 26926.132400, 338.075210, 338.075210, 0.000000, X, Y) && !ellipse(32200.808044, 26849.986786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32603.363586, 26728.174042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31384.123688, 26305.225220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30566.531311, 26649.654205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29922.069200, 25983.942600, 761.549622, 761.549622, 0.000000, X, Y) && !ellipse(33743.157043, 22777.124054, 1740.000000, 1740.000000, 0.000000, X, Y)
[Fri May  4 12:28:21 2012] Writing fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src46.gif
[Fri May  4 13:19:45 2012] Mean detx,y = (4811.45, -4463.41) 
[Fri May  4 13:19:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 13:20:07 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 13:20:07 2012] Setting source spectrum file to fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Fri May  4 13:20:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Fri May  4 16:22:23 2012] Updating aperture counts using extracted products
[Fri May  4 16:22:23 2012] Error reading totcts from fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Fri May  4 16:22:29 2012] Calculating source flux in energy range 0.30-8.00
[Fri May  4 16:22:29 2012] Using photon index=1.80, rate=0.00112, arf fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src46.arf
[Fri May  4 16:22:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  4 16:22:29 2012] Updating source flux to 1.6e-14