[Wed May  2 11:31:05 2012] Detection parameters:
  Position = (375.3, 307.8) = 0 14 52.03 -39 12 4.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.6 +/- 16.6
  Background counts = 99.1
  Rate = 0.001 +/- 0.0002

[Wed May  2 11:31:09 2012] Off-axis axis estimate = 5.61'
[Wed May  2 22:25:24 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Wed May  2 22:25:24 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Wed May  2 22:25:24 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.908
[Wed May  2 22:25:24 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 9.24"
[Thu May  3 03:01:16 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src54.ximg exists
[Thu May  3 03:01:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src54.csv
[Thu May  3 03:01:16 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src54_1.ximg exists
[Thu May  3 03:01:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src54.csv
[Thu May  3 03:01:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 03:01:18 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Thu May  3 03:01:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src54.csv
[Thu May  3 03:01:18 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Thu May  3 03:01:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src54.csv
[Thu May  3 03:01:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 03:02:39 2012] Spatial fit model total counts = 1357.330000, observed total counts = 3211.000000
[Thu May  3 03:02:39 2012] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  3 03:02:39 2012] Spatial fit model total counts = 3264.190000, observed total counts = 757.000000
[Thu May  3 03:02:39 2012] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  3 03:02:39 2012] Vigneting correction estimate = 1.000000
[Thu May  3 03:02:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 03:02:39 2012] Assessing source extent using major
[Thu May  3 03:02:39 2012] Source does appear to be extended
[Thu May  3 03:02:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 03:02:39 2012] Source is confused with source 42
[Thu May  3 15:15:00 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Thu May  3 15:15:00 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Thu May  3 15:15:00 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.908
[Thu May  3 15:15:00 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 9.24"
[Thu May  3 21:14:07 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src54.ximg exists
[Thu May  3 21:14:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src54.csv
[Thu May  3 21:14:07 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src54_1.ximg exists
[Thu May  3 21:14:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src54.csv
[Thu May  3 21:14:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 21:14:09 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Thu May  3 21:14:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src54.csv
[Thu May  3 21:14:09 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Thu May  3 21:14:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src54.csv
[Thu May  3 21:14:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 21:15:29 2012] Spatial fit model total counts = 1048.960000, observed total counts = 757.000000
[Thu May  3 21:15:29 2012] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  3 21:15:30 2012] Vigneting correction estimate = 1.000000
[Thu May  3 21:15:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 21:15:30 2012] Assessing source extent using major
[Thu May  3 21:15:30 2012] Source does appear to be extended
[Thu May  3 21:15:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 12:28:22 2012] XMMSAS src. selection expression = ellipse(32603.363586, 26728.174042, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 12:28:22 2012] Writing source region out to fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src36_src.reg
[Fri May  4 12:28:22 2012] Extracting stamp from image fullrun_mos2_xmm0655050101_pi300-10000_cl_sm2.00.img.gz, (338, 270) - (413, 345)
[Fri May  4 12:28:22 2012] XMMSAS bgd. selection expression = annulus(32603.363586, 26728.174042, 1087.500000, 2175.000000, X, Y) && !ellipse(34131.667480, 23693.565826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31481.968000, 27214.014000, 333.204810, 333.204810, 0.000000, X, Y) && !ellipse(32588.394000, 28297.034000, 488.052014, 488.052014, 0.000000, X, Y) && !ellipse(33815.848000, 27525.069200, 306.676809, 306.676809, 0.000000, X, Y) && !ellipse(34057.152000, 27485.810000, 1450.576042, 1450.576042, 0.000000, X, Y) && !ellipse(30524.166400, 25981.194800, 617.692818, 617.692818, 0.000000, X, Y) && !ellipse(32200.808044, 26849.986786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33339.921814, 27976.834320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31384.123688, 26305.225220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30566.531311, 26649.654205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29922.069200, 25983.942600, 761.549622, 761.549622, 0.000000, X, Y)
[Fri May  4 12:28:22 2012] Writing fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src36.gif
[Fri May  4 13:35:13 2012] Mean detx,y = (5925.98, -6169.27) 
[Fri May  4 13:35:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 13:36:01 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 13:36:02 2012] Setting source spectrum file to fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Fri May  4 13:36:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Fri May  4 16:04:50 2012] Not generating rmf since there are only 87 counts
[Fri May  4 16:04:50 2012] rmf not generated due to insufficient counts
[Fri May  4 16:22:25 2012] Updating aperture counts using extracted products
[Fri May  4 16:22:25 2012] Error reading totcts from fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Fri May  4 16:22:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri May  4 16:22:30 2012] Using photon index=1.80, rate=0.00115, arf fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src36.arf
[Fri May  4 16:22:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  4 16:22:30 2012] Updating source flux to 1.9e-14
[Fri May  4 16:27:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting