[Wed May  2 11:31:03 2012] Detection parameters:
  Position = (180.1, 398.0) = 0 16 5.02 -39 5 31.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.0 +/- 19.5
  Background counts = 80.7
  Rate = 0.002 +/- 0.0003

[Wed May  2 11:31:09 2012] Off-axis axis estimate = 11.21'
[Wed May  2 22:25:24 2012] Using EEF radius (= 12.04 ")to estimate initial spatial extent for simple fitting
[Wed May  2 22:25:24 2012] Initial guess for spatial extent in simple fitting = 12.04"
[Wed May  2 22:25:24 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.843
[Wed May  2 22:25:24 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 12.04"
[Thu May  3 03:01:15 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src26.ximg exists
[Thu May  3 03:01:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src26.csv
[Thu May  3 03:01:15 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu May  3 03:01:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src26.csv
[Thu May  3 03:01:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 03:01:17 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu May  3 03:01:17 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu May  3 03:01:17 2012] Fit fullrun_mos2_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Thu May  3 03:02:39 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 12.911644 pixels away
[Thu May  3 03:02:39 2012] Vigneting correction estimate = 1.000000
[Thu May  3 03:02:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 03:02:39 2012] Assessing source extent using major
[Thu May  3 03:02:39 2012] Source does appear to be extended
[Thu May  3 03:02:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 15:15:00 2012] Using EEF radius (= 12.04 ")to estimate initial spatial extent for simple fitting
[Thu May  3 15:15:00 2012] Initial guess for spatial extent in simple fitting = 12.04"
[Thu May  3 15:15:00 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.843
[Thu May  3 15:15:00 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 12.04"
[Thu May  3 21:14:06 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src26.ximg exists
[Thu May  3 21:14:06 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src26_1.ximg exists
[Thu May  3 21:14:06 2012] Fit fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_src26 appears to have run properly
[Thu May  3 21:14:08 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Thu May  3 21:14:08 2012] fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Thu May  3 21:14:08 2012] Fit fullrun_mos2_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Thu May  3 21:15:29 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 14.915059 pixels away
[Thu May  3 21:15:30 2012] Vigneting correction estimate = 1.000000
[Thu May  3 21:15:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 21:15:30 2012] Assessing source extent using major
[Thu May  3 21:15:30 2012] Source does appear to be extended
[Thu May  3 21:15:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 12:28:21 2012] XMMSAS src. selection expression = ellipse(15619.224808, 34581.525024, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 12:28:21 2012] Writing source region out to fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src17_src.reg
[Fri May  4 12:28:21 2012] Extracting stamp from image fullrun_mos2_xmm0655050101_pi300-10000_cl_sm2.00.img.gz, (143, 361) - (218, 436)
[Fri May  4 12:28:21 2012] XMMSAS bgd. selection expression = annulus(15619.224808, 34581.525024, 1087.500000, 2175.000000, X, Y) && !ellipse(17008.462250, 37110.427155, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 12:28:21 2012] Writing fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src17.gif
[Fri May  4 13:14:23 2012] Mean detx,y = (-12238.34, -2330.72) 
[Fri May  4 13:14:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 13:14:53 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 13:14:54 2012] Setting source spectrum file to fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri May  4 13:14:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri May  4 15:29:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 15:29:46 2012] rmf not generated due to insufficient counts
[Fri May  4 16:22:22 2012] Updating aperture counts using extracted products
[Fri May  4 16:22:22 2012] Error reading totcts from fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri May  4 16:22:29 2012] Calculating source flux in energy range 0.30-8.00
[Fri May  4 16:22:29 2012] Using photon index=1.80, rate=0.00227, arf fullrun_mos2_xmm0655050101_pi300-10000_pass1_cl_src17.arf
[Fri May  4 16:22:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  4 16:22:29 2012] Updating source flux to 4.2e-14
[Fri May  4 16:27:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting