[Wed May  2 11:30:59 2012] Detection parameters:
  Position = (383.9, 249.5) = 0 14 48.77 -39 16 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.2 +/- 18.3
  Background counts = 95.1
  Rate = 0.002 +/- 0.0003

[Wed May  2 11:31:00 2012] Off-axis axis estimate = 7.14'
[Wed May  2 18:41:01 2012] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Wed May  2 18:41:01 2012] Initial guess for spatial extent in simple fitting = 10.00"
[Wed May  2 18:41:01 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.958
[Wed May  2 18:41:01 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 10.00"
[Wed May  2 22:25:23 2012] fullrun_mos1_xmm0655050101_pi300-10000_cl_pass0_src32.ximg exists
[Wed May  2 22:25:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655050101_pi300-10000_cl_pass0_src32.csv
[Wed May  2 22:25:23 2012] fullrun_mos1_xmm0655050101_pi300-10000_cl_pass0_src32_1.ximg exists
[Wed May  2 22:25:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655050101_pi300-10000_cl_pass0_src32.csv
[Wed May  2 22:25:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0655050101_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0655050101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 22:25:24 2012] fullrun_mos1_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Wed May  2 22:25:24 2012] fullrun_mos1_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Wed May  2 22:25:24 2012] Fit fullrun_mos1_xmm0655050101_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Thu May  3 03:02:16 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 13.379315 pixels away
[Thu May  3 03:02:17 2012] Vigneting correction estimate = 1.000000
[Thu May  3 03:02:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 03:02:17 2012] Assessing source extent using major
[Thu May  3 03:02:17 2012] Source does appear to be extended
[Thu May  3 03:02:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 11:42:28 2012] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Thu May  3 11:42:28 2012] Initial guess for spatial extent in simple fitting = 10.00"
[Thu May  3 11:42:28 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.958
[Thu May  3 11:42:28 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 10.00"
[Thu May  3 15:14:59 2012] fullrun_mos1_xmm0655050101_pi300-10000_cl_pass1_src32.ximg exists
[Thu May  3 15:14:59 2012] fullrun_mos1_xmm0655050101_pi300-10000_cl_pass1_src32_1.ximg exists
[Thu May  3 15:14:59 2012] Fit fullrun_mos1_xmm0655050101_pi300-10000_cl_pass1_src32 appears to have run properly
[Thu May  3 15:15:00 2012] fullrun_mos1_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Thu May  3 15:15:00 2012] fullrun_mos1_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Thu May  3 15:15:00 2012] Fit fullrun_mos1_xmm0655050101_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Thu May  3 21:15:05 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 13.379315 pixels away
[Thu May  3 21:15:05 2012] Vigneting correction estimate = 1.000000
[Thu May  3 21:15:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 21:15:05 2012] Assessing source extent using major
[Thu May  3 21:15:05 2012] Source does appear to be extended
[Thu May  3 21:15:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 08:54:59 2012] XMMSAS src. selection expression = ellipse(33353.154480, 21661.817932, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 08:54:59 2012] Writing source region out to fullrun_mos1_xmm0655050101_pi300-10000_pass1_cl_src52_src.reg
[Fri May  4 08:54:59 2012] Extracting stamp from image fullrun_mos1_xmm0655050101_pi300-10000_cl_sm2.00.img.gz, (346, 212) - (421, 287)
[Fri May  4 08:54:59 2012] XMMSAS bgd. selection expression = annulus(33353.154480, 21661.817932, 1087.500000, 2175.000000, X, Y) && !ellipse(34105.931000, 23685.036400, 531.004815, 531.004815, 0.000000, X, Y) && !ellipse(35811.716919, 22778.892303, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 08:54:59 2012] Writing fullrun_mos1_xmm0655050101_pi300-10000_pass1_cl_src52.gif
[Fri May  4 09:25:14 2012] Mean detx,y = (-2440.62, -9875.29) 
[Fri May  4 09:25:16 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 09:25:35 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 09:25:35 2012] Setting source spectrum file to fullrun_mos1_xmm0655050101_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Fri May  4 09:25:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0655050101_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Fri May  4 11:53:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 11:53:37 2012] rmf not generated due to insufficient counts
[Fri May  4 16:22:11 2012] Updating aperture counts using extracted products
[Fri May  4 16:22:11 2012] Error reading totcts from fullrun_mos1_xmm0655050101_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Fri May  4 16:22:17 2012] Calculating source flux in energy range 0.30-8.00
[Fri May  4 16:22:17 2012] Using photon index=1.80, rate=0.00154, arf fullrun_mos1_xmm0655050101_pi300-10000_pass1_cl_src52.arf
[Fri May  4 16:22:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  4 16:22:17 2012] Updating source flux to 2.8e-14
[Fri May  4 16:22:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting