[Fri Jul  6 10:30:04 2012] Detection parameters:
  Position = (180.4, 299.6) = 15 0 38.63 -60 54 19.8
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 76.7 +/- 13.9
  Background counts = 321.3
  Rate = 0.002 +/- 0.0003

[Fri Jul  6 10:30:04 2012] Off-axis axis estimate = 8.56'
[Fri Jul  6 10:51:13 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 10:51:13 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Fri Jul  6 10:51:13 2012] source mask rpix=2.5, npix_max = 35, mask sum = 28, frac = 0.798
[Fri Jul  6 10:51:13 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.71"
[Fri Jul  6 11:09:55 2012] fullrun_mos1_xmm0655020201_pi300-10000_cl_pass0_src11.ximg exists
[Fri Jul  6 11:09:55 2012] fullrun_mos1_xmm0655020201_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Jul  6 11:09:55 2012] Fit fullrun_mos1_xmm0655020201_pi300-10000_cl_pass0_src11 appears to have run properly
[Fri Jul  6 11:09:55 2012] fullrun_mos1_xmm0655020201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Jul  6 11:09:55 2012] fullrun_mos1_xmm0655020201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Jul  6 11:09:55 2012] Fit fullrun_mos1_xmm0655020201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Jul  6 11:54:07 2012] Spatial fit model total counts = 131.131000, observed total counts = 134.000000
[Fri Jul  6 11:54:07 2012] Offset between fit and detection position for source 7 = 9.811686 pixels
[Fri Jul  6 11:54:07 2012] 126.575700 total counts/ 98.953100 bgd. counts: snr = 2.776834
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 9.811686 pixels
  Position = (189.8, 302.4) = 15 0 33.02 -60 54 10.5
  Extent = 21.4 (2.7-42.8)", rotation angle = 0
  Source counts = 27.6 +/- 11.3
  Background counts = 99.0
  Rate = 0.001 +/- 0.0004
[Fri Jul  6 11:54:07 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 11:54:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 11:54:07 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 11:54:07 2012] Source does appear to be extended
[Fri Jul  6 11:54:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 11:57:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul  6 11:57:29 2012] Initial guess for spatial extent in simple fitting = 21.41"
[Fri Jul  6 11:57:29 2012] source mask rpix=4.9, npix_max = 117, mask sum = 93, frac = 0.791
[Fri Jul  6 11:57:29 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 21.41"
[Fri Jul  6 12:16:22 2012] fullrun_mos1_xmm0655020201_pi300-10000_cl_pass1_src11.ximg exists
[Fri Jul  6 12:16:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655020201_pi300-10000_cl_pass1_src11.csv
[Fri Jul  6 12:16:22 2012] fullrun_mos1_xmm0655020201_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Jul  6 12:16:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655020201_pi300-10000_cl_pass1_src11.csv
[Fri Jul  6 12:16:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0655020201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0655020201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 12:16:22 2012] fullrun_mos1_xmm0655020201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Jul  6 12:16:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655020201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Jul  6 12:16:22 2012] fullrun_mos1_xmm0655020201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Jul  6 12:16:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0655020201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Jul  6 12:16:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0655020201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0655020201_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 12:58:56 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.595188 pixels away
[Fri Jul  6 12:58:56 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 12:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 12:58:56 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 12:58:56 2012] Source does appear to be extended
[Fri Jul  6 12:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 13:17:13 2012] XMMSAS src. selection expression = ellipse(16464.492000, 26257.590000, 1284.894037, 1284.894037, 0.000000, X, Y)
[Fri Jul  6 13:17:13 2012] Writing source region out to fullrun_mos1_xmm0655020201_pi300-10000_pass1_cl_src7_src.reg
[Fri Jul  6 13:17:13 2012] Extracting stamp from image fullrun_mos1_xmm0655020201_pi300-10000_cl_sm2.00.img.gz, (116, 229) - (264, 376)
[Fri Jul  6 13:17:13 2012] XMMSAS bgd. selection expression = annulus(16464.492000, 26257.590000, 2141.490062, 4282.980123, X, Y) && !ellipse(20162.874680, 26626.268707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14075.940000, 21446.804000, 3521.344101, 655.252819, 208.419000, X, Y)
[Fri Jul  6 13:17:13 2012] Writing fullrun_mos1_xmm0655020201_pi300-10000_pass1_cl_src7.gif
[Fri Jul  6 13:23:25 2012] Mean detx,y = (-5922.23, 6995.42) 
[Fri Jul  6 13:23:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 13:24:00 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 13:24:00 2012] Setting source spectrum file to fullrun_mos1_xmm0655020201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jul  6 13:24:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0655020201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Jul  6 13:29:12 2012] Not generating rmf since there are only 27 counts
[Fri Jul  6 13:29:12 2012] rmf not generated due to insufficient counts
[Fri Jul  6 13:40:23 2012] Updating aperture counts using extracted products
[Fri Jul  6 13:40:23 2012] Error reading totcts from fullrun_mos1_xmm0655020201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jul  6 13:40:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 13:40:23 2012] Using photon index=1.80, rate=0.00105, arf fullrun_mos1_xmm0655020201_pi300-10000_pass1_cl_src7.arf
[Fri Jul  6 13:40:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 13:40:23 2012] Updating source flux to 1.5e-14
[Fri Jul  6 13:40:25 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting