[Thu Jun  6 11:02:01 2013] Detection parameters:
  Position = (309.6, 328.0) = 9 45 39.59 -14 19 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.1 +/- 14.6
  Background counts = 45.8
  Rate = 0.001 +/- 0.0003

[Thu Jun  6 11:02:01 2013] Off-axis axis estimate = 2.29'
[Thu Jun  6 11:37:47 2013] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 11:37:47 2013] Initial guess for spatial extent in simple fitting = 7.57"
[Thu Jun  6 11:37:47 2013] source mask rpix=1.7, npix_max = 20, mask sum = 12, frac = 0.597
[Thu Jun  6 11:37:47 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 7.57"
[Thu Jun  6 12:19:56 2013] fullrun_mos2_xmm0654910601_pi300-10000_cl_pass0_src16.ximg exists
[Thu Jun  6 12:19:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654910601_pi300-10000_cl_pass0_src16.csv
[Thu Jun  6 12:19:56 2013] fullrun_mos2_xmm0654910601_pi300-10000_cl_pass0_src16_1.ximg exists
[Thu Jun  6 12:19:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654910601_pi300-10000_cl_pass0_src16.csv
[Thu Jun  6 12:19:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0654910601_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0654910601_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 12:19:56 2013] fullrun_mos2_xmm0654910601_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Thu Jun  6 12:19:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654910601_pi300-10000_cl_pass0_tfrozen_src16.csv
[Thu Jun  6 12:19:56 2013] fullrun_mos2_xmm0654910601_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Thu Jun  6 12:19:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654910601_pi300-10000_cl_pass0_tfrozen_src16.csv
[Thu Jun  6 12:19:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0654910601_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0654910601_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 12:20:02 2013] Source 10 is offset by 7.544887 and 5.954006 pixels which is larger than
2 X fitted extent = 2.213251 x 2.213251, not incorporating fit results
[Thu Jun  6 12:20:02 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 12:20:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 12:20:02 2013] Assessing source extent using major
[Thu Jun  6 12:20:02 2013] Source does appear to be extended
[Thu Jun  6 12:20:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 12:20:02 2013] Deleting source due to low Poisson probability 0.9