[Mon May 28 00:35:25 2012] Detection parameters:
  Position = (303.0, 321.2) = 9 45 42.01 -14 19 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49424.5 +/- 263.6
  Background counts = 66.7
  Rate = 0.9 +/- 0.005

[Mon May 28 00:35:25 2012] Off-axis axis estimate = 1.68'
[Mon May 28 01:15:16 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Mon May 28 01:15:16 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Mon May 28 01:15:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Mon May 28 01:15:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Mon May 28 01:36:41 2012] fullrun_mos2_xmm0654910501_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 28 01:36:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654910501_pi300-10000_cl_pass0_src1.csv
[Mon May 28 01:36:41 2012] fullrun_mos2_xmm0654910501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 28 01:36:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654910501_pi300-10000_cl_pass0_src1.csv
[Mon May 28 01:36:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0654910501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0654910501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 01:36:41 2012] fullrun_mos2_xmm0654910501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 28 01:36:41 2012] fullrun_mos2_xmm0654910501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 28 01:36:41 2012] Fit fullrun_mos2_xmm0654910501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 28 01:36:45 2012] Spatial fit model total counts = 41744.600000, observed total counts = 40505.000000
[Mon May 28 01:36:45 2012] Offset between fit and detection position for source 2 = 0.218349 pixels
[Mon May 28 01:36:45 2012] 42019.900000 total counts/ 10669.300000 bgd. counts: snr = 303.513417
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.218349 pixels
  Position = (302.8, 321.3) = 9 45 42.06 -14 19 35.0
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 31350.6 +/- 205.0
  Background counts = 10669.3
  Rate = 0.6 +/- 0.004
[Mon May 28 01:36:45 2012] Vigneting correction estimate = 1.000000
[Mon May 28 01:36:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 01:36:45 2012] Assessing source extent using major axis lower bound
[Mon May 28 01:36:45 2012] Source does appear to be extended
[Mon May 28 01:36:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 01:55:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 01:55:42 2012] Initial guess for spatial extent in simple fitting = 5.26"
[Mon May 28 01:55:42 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.027
[Mon May 28 01:55:42 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.26"
[Mon May 28 02:05:41 2012] fullrun_mos2_xmm0654910501_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 28 02:05:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654910501_pi300-10000_cl_pass1_src1.csv
[Mon May 28 02:05:41 2012] fullrun_mos2_xmm0654910501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 28 02:05:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654910501_pi300-10000_cl_pass1_src1.csv
[Mon May 28 02:05:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0654910501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0654910501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 02:05:41 2012] fullrun_mos2_xmm0654910501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 28 02:05:41 2012] fullrun_mos2_xmm0654910501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 28 02:05:41 2012] Fit fullrun_mos2_xmm0654910501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 28 02:05:44 2012] Spatial fit model total counts = 41704.600000, observed total counts = 40505.000000
[Mon May 28 02:05:44 2012] Offset between fit and detection position for source 2 = 0.000767 pixels
[Mon May 28 02:05:44 2012] 41970.500000 total counts/ 10604.700000 bgd. counts: snr = 304.584063
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000767 pixels
  Position = (302.8, 321.3) = 9 45 42.06 -14 19 35.0
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 31365.8 +/- 204.9
  Background counts = 10604.7
  Rate = 0.6 +/- 0.004
[Mon May 28 02:05:44 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:05:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:05:44 2012] Assessing source extent using major axis lower bound
[Mon May 28 02:05:44 2012] Source does appear to be extended
[Mon May 28 02:05:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 03:08:54 2012] Counts = 31365.800000, rescaling region sizes by 3.000000
[Mon May 28 03:08:54 2012] XMMSAS src. selection expression = ellipse(26298.818280, 27902.280400, 946.362627, 946.362627, 0.000000, X, Y)
[Mon May 28 03:08:54 2012] Writing source region out to fullrun_mos2_xmm0654910501_pi300-10000_pass1_cl_src2_src.reg
[Mon May 28 03:08:54 2012] Extracting stamp from image fullrun_mos2_xmm0654910501_pi300-10000_cl_sm2.00.img.gz, (248, 267) - (357, 376)
[Mon May 28 03:08:54 2012] XMMSAS bgd. selection expression = annulus(26298.818280, 27902.280400, 4731.813136, 9463.626272, X, Y) && !ellipse(32494.257540, 22132.636400, 381.360011, 381.360011, 0.000000, X, Y)
[Mon May 28 03:08:54 2012] Writing fullrun_mos2_xmm0654910501_pi300-10000_pass1_cl_src2.gif
[Mon May 28 03:09:00 2012] Mean detx,y = (95.55, 65.65) 
[Mon May 28 03:09:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:10:47 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:10:47 2012] Setting source spectrum file to fullrun_mos2_xmm0654910501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 28 03:10:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0654910501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May 28 03:19:44 2012] Updating aperture counts using extracted products
[Mon May 28 03:19:44 2012] Error reading totcts from fullrun_mos2_xmm0654910501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 28 03:19:44 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 03:19:44 2012] Using photon index=1.80, rate=0.604, arf fullrun_mos2_xmm0654910501_pi300-10000_pass1_cl_src2.arf
[Mon May 28 03:19:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 03:19:44 2012] Updating source flux to 6.4e-12
[Mon May 28 03:20:13 2012] Reading fit data from xmm0654910501/analysis//spectral/fullrun_mos2_xmm0654910501_pi300-10000_pass1_cl_src2_pl.csv
[Mon May 28 03:20:13 2012] Spectral fit parameter nH value = 5.90777e+21
[Mon May 28 03:20:13 2012] Spectral fit parameter PhoIndex value = 1.39042
[Mon May 28 03:20:13 2012] Failed to get F(0.3-8.0) from xmm0654910501/analysis//spectral/fullrun_mos2_xmm0654910501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon May 28 03:20:13 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 03:20:13 2012] Using Nh = 5.9e+21, photon index=1.39, rate=0.604, arf fullrun_mos2_xmm0654910501_pi300-10000_pass1_cl_src2.arf
[Mon May 28 03:20:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 03:20:13 2012] Updating source flux to 1.1e-11