[Mon Aug  6 04:20:41 2012] Detection parameters:
  Position = (304.9, 321.2) = 9 45 41.93 -14 19 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29290.9 +/- 201.9
  Background counts = 37.7
  Rate = 0.5 +/- 0.004

[Mon Aug  6 04:20:41 2012] Off-axis axis estimate = 1.71'
[Mon Aug  6 04:38:28 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 04:38:28 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Aug  6 04:38:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Mon Aug  6 04:38:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon Aug  6 05:08:09 2012] fullrun_mos1_xmm0654910401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug  6 05:08:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0654910401_pi300-10000_cl_pass0_src1.csv
[Mon Aug  6 05:08:09 2012] fullrun_mos1_xmm0654910401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug  6 05:08:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0654910401_pi300-10000_cl_pass0_src1.csv
[Mon Aug  6 05:08:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0654910401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0654910401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 05:08:09 2012] fullrun_mos1_xmm0654910401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug  6 05:08:09 2012] fullrun_mos1_xmm0654910401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug  6 05:08:09 2012] Fit fullrun_mos1_xmm0654910401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug  6 05:48:43 2012] Spatial fit model total counts = 26266.700000, observed total counts = 25910.000000
[Mon Aug  6 05:48:43 2012] Offset between fit and detection position for source 2 = 0.193569 pixels
[Mon Aug  6 05:48:43 2012] 26254.980000 total counts/ 5857.880000 bgd. counts: snr = 266.500599
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.193569 pixels
  Position = (304.7, 321.2) = 9 45 41.99 -14 19 35.7
  Extent = 5.3 (5.3-5.4)", rotation angle = 0
  Source counts = 20397.1 +/- 162.0
  Background counts = 5857.9
  Rate = 0.3 +/- 0.003
[Mon Aug  6 05:48:43 2012] Spatial fit model total counts = 16801.600000, observed total counts = 21468.000000
[Mon Aug  6 05:48:43 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug  6 05:48:43 2012] Vigneting correction estimate = 1.000000
[Mon Aug  6 05:48:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug  6 05:48:43 2012] Assessing source extent using major axis lower bound
[Mon Aug  6 05:48:43 2012] Source does appear to be extended
[Mon Aug  6 05:48:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug  6 05:50:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug  6 05:50:08 2012] Initial guess for spatial extent in simple fitting = 5.33"
[Mon Aug  6 05:50:08 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.008
[Mon Aug  6 05:50:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.33"
[Mon Aug  6 06:29:13 2012] fullrun_mos1_xmm0654910401_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug  6 06:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0654910401_pi300-10000_cl_pass1_src1.csv
[Mon Aug  6 06:29:13 2012] fullrun_mos1_xmm0654910401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug  6 06:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0654910401_pi300-10000_cl_pass1_src1.csv
[Mon Aug  6 06:29:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0654910401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0654910401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 06:29:13 2012] fullrun_mos1_xmm0654910401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug  6 06:29:13 2012] fullrun_mos1_xmm0654910401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug  6 06:29:13 2012] Fit fullrun_mos1_xmm0654910401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Aug  6 06:52:58 2012] Spatial fit model total counts = 26364.800000, observed total counts = 25861.000000
[Mon Aug  6 06:52:58 2012] Offset between fit and detection position for source 2 = 0.008991 pixels
[Mon Aug  6 06:52:58 2012] 26425.220000 total counts/ 6191.720000 bgd. counts: snr = 257.137466
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.008991 pixels
  Position = (304.7, 321.2) = 9 45 41.99 -14 19 35.7
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 20233.5 +/- 162.6
  Background counts = 6191.7
  Rate = 0.3 +/- 0.003
[Mon Aug  6 06:52:58 2012] Vigneting correction estimate = 1.000000
[Mon Aug  6 06:52:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug  6 06:52:58 2012] Assessing source extent using major axis lower bound
[Mon Aug  6 06:52:58 2012] Source does appear to be extended
[Mon Aug  6 06:52:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug  6 07:17:22 2012] Counts = 20233.500000, rescaling region sizes by 3.000000
[Mon Aug  6 07:17:22 2012] XMMSAS src. selection expression = ellipse(26458.500000, 27897.031800, 954.547227, 954.547227, 0.000000, X, Y)
[Mon Aug  6 07:17:22 2012] Writing source region out to fullrun_mos1_xmm0654910401_pi300-10000_pass1_cl_src2_src.reg
[Mon Aug  6 07:17:22 2012] Extracting stamp from image fullrun_mos1_xmm0654910401_pi300-10000_cl_sm2.00.img.gz, (250, 266) - (360, 376)
[Mon Aug  6 07:17:22 2012] XMMSAS bgd. selection expression = annulus(26458.500000, 27897.031800, 4772.736137, 9545.472275, X, Y) && !ellipse(26751.429443, 27259.809143, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug  6 07:17:22 2012] Writing fullrun_mos1_xmm0654910401_pi300-10000_pass1_cl_src2.gif
[Mon Aug  6 07:17:29 2012] Mean detx,y = (309.37, -222.91) 
[Mon Aug  6 07:17:31 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug  6 07:19:16 2012] Binned source spectrum to 10 counts/bin
[Mon Aug  6 07:19:16 2012] Setting source spectrum file to fullrun_mos1_xmm0654910401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Aug  6 07:19:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0654910401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Aug  6 08:03:35 2012] Updating aperture counts using extracted products
[Mon Aug  6 08:03:35 2012] Error reading totcts from fullrun_mos1_xmm0654910401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Aug  6 08:03:35 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug  6 08:03:35 2012] Using photon index=1.80, rate=0.335, arf fullrun_mos1_xmm0654910401_pi300-10000_pass1_cl_src2.arf
[Mon Aug  6 08:03:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug  6 08:03:35 2012] Updating source flux to 3.2e-12
[Mon Aug  6 08:03:36 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Mon Aug  6 08:04:15 2012] Reading fit data from xmm0654910401/analysis//spectral/fullrun_mos1_xmm0654910401_pi300-10000_pass1_cl_src2_pl.csv
[Mon Aug  6 08:04:15 2012] Spectral fit parameter nH value = 3.67738e+21
[Mon Aug  6 08:04:15 2012] Spectral fit parameter PhoIndex value = 1.22059
[Mon Aug  6 08:04:15 2012] Failed to get F(0.3-8.0) from xmm0654910401/analysis//spectral/fullrun_mos1_xmm0654910401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Aug  6 08:04:15 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug  6 08:04:15 2012] Using Nh = 3.7e+21, photon index=1.22, rate=0.335, arf fullrun_mos1_xmm0654910401_pi300-10000_pass1_cl_src2.arf
[Mon Aug  6 08:04:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug  6 08:04:15 2012] Updating source flux to 5.5e-12