[Thu Jul 12 13:31:23 2012] Detection parameters:
  Position = (245.0, 268.3) = 7 1 42.45 -11 23 31.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.4 +/- 8.3
  Background counts = 10.2
  Rate = 0.001 +/- 0.0004

[Thu Jul 12 13:31:23 2012] Off-axis axis estimate = 4.45'
[Thu Jul 12 14:56:45 2012] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 14:56:45 2012] Initial guess for spatial extent in simple fitting = 8.65"
[Thu Jul 12 14:56:45 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.807
[Thu Jul 12 14:56:45 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 8.65"
[Thu Jul 12 15:26:15 2012] fullrun_mos2_xmm0654880301_pi300-10000_cl_pass0_src22.ximg exists
[Thu Jul 12 15:26:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654880301_pi300-10000_cl_pass0_src22.csv
[Thu Jul 12 15:26:15 2012] fullrun_mos2_xmm0654880301_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Jul 12 15:26:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654880301_pi300-10000_cl_pass0_src22.csv
[Thu Jul 12 15:26:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0654880301_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0654880301_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 15:26:16 2012] fullrun_mos2_xmm0654880301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Jul 12 15:26:16 2012] fullrun_mos2_xmm0654880301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Jul 12 15:26:16 2012] Fit fullrun_mos2_xmm0654880301_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu Jul 12 15:26:30 2012] Source 17 is offset by 2.695642 and 3.652727 pixels which is larger than
2 X fitted extent = 0.994566 x 0.994566, not incorporating fit results
[Thu Jul 12 15:26:30 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 15:26:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 15:26:30 2012] Assessing source extent using major
[Thu Jul 12 15:26:30 2012] Source does appear to be extended
[Thu Jul 12 15:26:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 16:39:43 2012] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 16:39:43 2012] Initial guess for spatial extent in simple fitting = 8.65"
[Thu Jul 12 16:39:43 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.807
[Thu Jul 12 16:39:43 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 8.65"
[Thu Jul 12 17:07:12 2012] fullrun_mos2_xmm0654880301_pi300-10000_cl_pass1_src22.ximg exists
[Thu Jul 12 17:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654880301_pi300-10000_cl_pass1_src22.csv
[Thu Jul 12 17:07:12 2012] fullrun_mos2_xmm0654880301_pi300-10000_cl_pass1_src22_1.ximg exists
[Thu Jul 12 17:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654880301_pi300-10000_cl_pass1_src22.csv
[Thu Jul 12 17:07:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0654880301_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0654880301_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 17:07:12 2012] fullrun_mos2_xmm0654880301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Thu Jul 12 17:07:12 2012] fullrun_mos2_xmm0654880301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Thu Jul 12 17:07:12 2012] Fit fullrun_mos2_xmm0654880301_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Thu Jul 12 17:07:26 2012] Source 17 is offset by -3.534519 and -8.172008 pixels which is larger than
2 X fitted extent = 0.684326 x 0.684326, not incorporating fit results
[Thu Jul 12 17:07:26 2012] Spatial fit model total counts = 146.834000, observed total counts = 137.000000
[Thu Jul 12 17:07:26 2012] Offset between fit and detection position for source 17 = 0.129030 pixels
[Thu Jul 12 17:07:26 2012] 146.121900 total counts/ 127.389000 bgd. counts: snr = 1.659736
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.129030 pixels
  Position = (245.0, 268.4) = 7 1 42.44 -11 23 32.4
  Extent = 5.2 (2.2-7.9)", rotation angle = 0
  Source counts = 18.7 +/- 12.1
  Background counts = 127.4
  Rate = 0.0006 +/- 0.0004
  Deleting source due to low Poisson probability