[Thu Jul 12 13:31:01 2012] Detection parameters:
  Position = (402.0, 297.3) = 7 0 56.00 -11 21 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.8 +/- 9.5
  Background counts = 10.5
  Rate = 0.002 +/- 0.0005

[Thu Jul 12 13:31:01 2012] Off-axis axis estimate = 7.51'
[Thu Jul 12 14:36:53 2012] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 14:36:53 2012] Initial guess for spatial extent in simple fitting = 10.18"
[Thu Jul 12 14:36:53 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.115
[Thu Jul 12 14:36:53 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.18"
[Thu Jul 12 14:56:45 2012] fullrun_mos1_xmm0654880301_pi300-10000_cl_pass0_src9.ximg exists
[Thu Jul 12 14:56:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0654880301_pi300-10000_cl_pass0_src9.csv
[Thu Jul 12 14:56:45 2012] fullrun_mos1_xmm0654880301_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Jul 12 14:56:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0654880301_pi300-10000_cl_pass0_src9.csv
[Thu Jul 12 14:56:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0654880301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0654880301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 14:56:45 2012] fullrun_mos1_xmm0654880301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Jul 12 14:56:45 2012] fullrun_mos1_xmm0654880301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jul 12 14:56:45 2012] Fit fullrun_mos1_xmm0654880301_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Jul 12 15:26:26 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 11.460083 pixels away
[Thu Jul 12 15:26:26 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 15:26:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 15:26:26 2012] Assessing source extent using major
[Thu Jul 12 15:26:26 2012] Source does appear to be extended
[Thu Jul 12 15:26:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 16:19:04 2012] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 16:19:04 2012] Initial guess for spatial extent in simple fitting = 10.18"
[Thu Jul 12 16:19:04 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.115
[Thu Jul 12 16:19:04 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.18"
[Thu Jul 12 16:39:43 2012] fullrun_mos1_xmm0654880301_pi300-10000_cl_pass1_src9.ximg exists
[Thu Jul 12 16:39:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0654880301_pi300-10000_cl_pass1_src9.csv
[Thu Jul 12 16:39:43 2012] fullrun_mos1_xmm0654880301_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Jul 12 16:39:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0654880301_pi300-10000_cl_pass1_src9.csv
[Thu Jul 12 16:39:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0654880301_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0654880301_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 16:39:43 2012] fullrun_mos1_xmm0654880301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Jul 12 16:39:43 2012] fullrun_mos1_xmm0654880301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jul 12 16:39:43 2012] Fit fullrun_mos1_xmm0654880301_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Jul 12 17:07:22 2012] Spatial fit model total counts = 149.288000, observed total counts = 150.000000
[Thu Jul 12 17:07:22 2012] Offset between fit and detection position for source 12 = 0.498849 pixels
[Thu Jul 12 17:07:22 2012] 148.889400 total counts/ 114.465000 bgd. counts: snr = 3.217585
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.498849 pixels
  Position = (401.5, 297.3) = 7 0 56.15 -11 21 26.7
  Extent = 4.6 (3.3-6.1)", rotation angle = 0
  Source counts = 34.4 +/- 12.2
  Background counts = 114.5
  Rate = 0.001 +/- 0.0004
[Thu Jul 12 17:07:23 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 17:07:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 17:07:23 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 17:07:23 2012] Source does appear to be extended
[Thu Jul 12 17:07:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 17:55:57 2012] XMMSAS src. selection expression = ellipse(34884.141200, 25816.855400, 273.808208, 273.808208, 0.000000, X, Y)
[Thu Jul 12 17:55:57 2012] Writing source region out to fullrun_mos1_xmm0654880301_pi300-10000_pass1_cl_src12_src.reg
[Thu Jul 12 17:55:57 2012] Extracting stamp from image fullrun_mos1_xmm0654880301_pi300-10000_cl_sm2.00.img.gz, (386, 282) - (417, 313)
[Thu Jul 12 17:55:57 2012] XMMSAS bgd. selection expression = annulus(34884.141200, 25816.855400, 456.347013, 912.694026, X, Y)
[Thu Jul 12 17:55:57 2012] Writing fullrun_mos1_xmm0654880301_pi300-10000_pass1_cl_src12.gif
[Thu Jul 12 17:58:26 2012] Mean detx,y = (-1829.73, 7582.38) 
[Thu Jul 12 17:58:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 17:58:34 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 17:58:34 2012] Setting source spectrum file to fullrun_mos1_xmm0654880301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jul 12 17:58:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0654880301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jul 12 18:04:15 2012] Not generating rmf since there are only 34 counts
[Thu Jul 12 18:04:15 2012] rmf not generated due to insufficient counts
[Thu Jul 12 18:15:08 2012] Updating aperture counts using extracted products
[Thu Jul 12 18:15:08 2012] Error reading totcts from fullrun_mos1_xmm0654880301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jul 12 18:15:08 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 18:15:08 2012] Using photon index=1.80, rate=0.00109, arf fullrun_mos1_xmm0654880301_pi300-10000_pass1_cl_src12.arf
[Thu Jul 12 18:15:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 18:15:08 2012] Updating source flux to 2e-14
[Thu Jul 12 18:15:10 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting