[Tue Jul 24 17:51:04 2012] Detection parameters:
  Position = (368.5, 331.0) = 7 4 0.57 -11 33 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.6 +/- 17.4
  Background counts = 58.3
  Rate = 0.005 +/- 0.0006

[Tue Jul 24 17:51:05 2012] Off-axis axis estimate = 5.60'
[Tue Jul 24 17:54:55 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 17:54:55 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Tue Jul 24 17:54:55 2012] source mask rpix=2.1, npix_max = 27, mask sum = 29, frac = 1.055
[Tue Jul 24 17:54:55 2012] Giving source the simple spatial ID 70 for pass 0, mean size = 9.23"
[Tue Jul 24 21:09:17 2012] fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_src70.ximg exists
[Tue Jul 24 21:09:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_src70.csv
[Tue Jul 24 21:09:17 2012] fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_src70_1.ximg exists
[Tue Jul 24 21:09:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_src70.csv
[Tue Jul 24 21:09:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 21:09:19 2012] fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Tue Jul 24 21:09:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_tfrozen_src70.csv
[Tue Jul 24 21:09:19 2012] fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Tue Jul 24 21:09:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_tfrozen_src70.csv
[Tue Jul 24 21:09:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 00:02:23 2012] Source 71 is offset by -3.023267 and -9.490845 pixels which is larger than
2 X fitted extent = 8.214289 x 6.649288, not incorporating fit results
[Wed Jul 25 00:02:24 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 00:02:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 00:02:24 2012] Assessing source extent using major
[Wed Jul 25 00:02:24 2012] Source does appear to be extended
[Wed Jul 25 00:02:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 00:03:06 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 00:03:06 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Wed Jul 25 00:03:06 2012] source mask rpix=2.1, npix_max = 27, mask sum = 29, frac = 1.055
[Wed Jul 25 00:03:06 2012] Giving source the simple spatial ID 66 for pass 1, mean size = 9.23"
[Wed Jul 25 02:46:18 2012] fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_src66.ximg exists
[Wed Jul 25 02:46:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_src66.csv
[Wed Jul 25 02:46:18 2012] fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_src66_1.ximg exists
[Wed Jul 25 02:46:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_src66.csv
[Wed Jul 25 02:46:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 02:46:20 2012] fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Wed Jul 25 02:46:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_tfrozen_src66.csv
[Wed Jul 25 02:46:20 2012] fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Wed Jul 25 02:46:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_tfrozen_src66.csv
[Wed Jul 25 02:46:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 05:31:50 2012] Source 71 is offset by -7.852767 and 5.005429 pixels which is larger than
2 X fitted extent = 2.221986 x 2.221986, not incorporating fit results
[Wed Jul 25 05:31:50 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 05:31:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 05:31:50 2012] Assessing source extent using major
[Wed Jul 25 05:31:50 2012] Source does appear to be extended
[Wed Jul 25 05:31:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 05:32:34 2012] XMMSAS src. selection expression = ellipse(32007.203308, 28747.966339, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 05:32:34 2012] Writing source region out to fullrun_pn_xmm0654880201_pi300-10000_pass1_cl_src71_src.reg
[Wed Jul 25 05:32:34 2012] Extracting stamp from image fullrun_pn_xmm0654880201_pi300-10000_cl_sm2.00.img.gz, (331, 293) - (406, 368)
[Wed Jul 25 05:32:34 2012] XMMSAS bgd. selection expression = annulus(32007.203308, 28747.966339, 1087.500000, 2175.000000, X, Y) && !ellipse(31276.934845, 30922.406128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32763.318481, 30303.834747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33939.722137, 30159.090515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33552.106000, 30197.020399, 1584.123651, 477.743538, 0.000000, X, Y) && !ellipse(33360.205122, 29131.156400, 561.248816, 561.248816, 0.000000, X, Y) && !ellipse(31252.049255, 28732.269806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33651.011597, 28050.806091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34086.656769, 27809.049744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34621.318604, 27628.595367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32481.811035, 26907.258423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33703.036896, 26223.638824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31841.619751, 25855.229614, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 05:32:34 2012] Writing fullrun_pn_xmm0654880201_pi300-10000_pass1_cl_src71.gif
[Wed Jul 25 06:14:33 2012] Mean detx,y = (5418.64, -390.93) 
[Wed Jul 25 06:14:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 06:14:54 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 06:14:54 2012] Setting source spectrum file to fullrun_pn_xmm0654880201_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Wed Jul 25 06:14:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0654880201_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Wed Jul 25 07:27:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 25 07:27:56 2012] rmf not generated due to insufficient counts
[Wed Jul 25 09:22:37 2012] Updating aperture counts using extracted products
[Wed Jul 25 09:22:37 2012] Error reading totcts from fullrun_pn_xmm0654880201_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Wed Jul 25 09:22:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 09:22:40 2012] Using photon index=1.80, rate=0.00486, arf fullrun_pn_xmm0654880201_pi300-10000_pass1_cl_src71.arf
[Wed Jul 25 09:22:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 09:22:40 2012] Updating source flux to 1.5e-14
[Wed Jul 25 09:24:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting