[Tue Jul 24 17:51:03 2012] Detection parameters:
  Position = (293.7, 374.2) = 7 4 22.70 -11 30 47.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.1 +/- 19.8
  Background counts = 53.5
  Rate = 0.007 +/- 0.0008

[Tue Jul 24 17:51:05 2012] Off-axis axis estimate = 5.51'
[Tue Jul 24 17:54:55 2012] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 17:54:55 2012] Initial guess for spatial extent in simple fitting = 9.18"
[Tue Jul 24 17:54:55 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.917
[Tue Jul 24 17:54:55 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 9.18"
[Tue Jul 24 21:09:16 2012] fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_src50.ximg exists
[Tue Jul 24 21:09:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_src50.csv
[Tue Jul 24 21:09:17 2012] fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_src50_1.ximg exists
[Tue Jul 24 21:09:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_src50.csv
[Tue Jul 24 21:09:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 21:09:18 2012] fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Tue Jul 24 21:09:18 2012] fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Tue Jul 24 21:09:18 2012] Fit fullrun_pn_xmm0654880201_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Wed Jul 25 00:02:23 2012] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 12.704827 pixels away
[Wed Jul 25 00:02:23 2012] Source 50 is offset by 3.811529 and -2.636500 pixels which is larger than
2 X fitted extent = 1.109324 x 1.109324, not incorporating fit results
[Wed Jul 25 00:02:24 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 00:02:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 00:02:24 2012] Assessing source extent using major
[Wed Jul 25 00:02:24 2012] Source does appear to be extended
[Wed Jul 25 00:02:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 00:03:06 2012] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 00:03:06 2012] Initial guess for spatial extent in simple fitting = 9.18"
[Wed Jul 25 00:03:06 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.917
[Wed Jul 25 00:03:06 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 9.18"
[Wed Jul 25 02:46:18 2012] fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_src46.ximg exists
[Wed Jul 25 02:46:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_src46.csv
[Wed Jul 25 02:46:18 2012] fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_src46_1.ximg exists
[Wed Jul 25 02:46:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_src46.csv
[Wed Jul 25 02:46:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 02:46:20 2012] fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Wed Jul 25 02:46:20 2012] fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Wed Jul 25 02:46:20 2012] Fit fullrun_pn_xmm0654880201_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Wed Jul 25 05:31:50 2012] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 11.648250 pixels away
[Wed Jul 25 05:31:50 2012] Source 50 is offset by 3.811529 and -2.636500 pixels which is larger than
2 X fitted extent = 1.109324 x 1.109324, not incorporating fit results
[Wed Jul 25 05:31:50 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 05:31:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 05:31:50 2012] Assessing source extent using major
[Wed Jul 25 05:31:50 2012] Source does appear to be extended
[Wed Jul 25 05:31:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 05:32:33 2012] XMMSAS src. selection expression = ellipse(25502.193024, 32510.214539, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 05:32:33 2012] Writing source region out to fullrun_pn_xmm0654880201_pi300-10000_pass1_cl_src50_src.reg
[Wed Jul 25 05:32:33 2012] Extracting stamp from image fullrun_pn_xmm0654880201_pi300-10000_cl_sm2.00.img.gz, (256, 337) - (331, 412)
[Wed Jul 25 05:32:33 2012] XMMSAS bgd. selection expression = annulus(25502.193024, 32510.214539, 1087.500000, 2175.000000, X, Y) && !ellipse(25879.817841, 34384.089081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24435.893433, 31888.754486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25528.573872, 31502.298437, 409.474447, 373.226826, 27.583631, X, Y) && !ellipse(24336.584717, 30709.717041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26238.696500, 30776.963400, 419.696812, 419.696812, 0.000000, X, Y) && !ellipse(23060.208588, 30261.818909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25276.411987, 30114.297516, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 05:32:33 2012] Writing fullrun_pn_xmm0654880201_pi300-10000_pass1_cl_src50.gif
[Wed Jul 25 06:01:22 2012] Mean detx,y = (-467.98, -5097.45) 
[Wed Jul 25 06:01:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 06:01:41 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 06:01:41 2012] Setting source spectrum file to fullrun_pn_xmm0654880201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Wed Jul 25 06:01:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0654880201_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Wed Jul 25 07:06:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 25 07:06:00 2012] rmf not generated due to insufficient counts
[Wed Jul 25 09:22:37 2012] Updating aperture counts using extracted products
[Wed Jul 25 09:22:37 2012] Error reading totcts from fullrun_pn_xmm0654880201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Wed Jul 25 09:22:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 09:22:39 2012] Using photon index=1.80, rate=0.00726, arf fullrun_pn_xmm0654880201_pi300-10000_pass1_cl_src50.arf
[Wed Jul 25 09:22:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 09:22:40 2012] Updating source flux to 2.4e-14
[Wed Jul 25 09:24:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting