[Sat Aug 11 20:21:42 2012] Detection parameters:
  Position = (308.9, 293.0) = 8 29 29.03 -48 29 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 537.1 +/- 47.2
  Background counts = 681.8
  Rate = 0.02 +/- 0.002

[Sat Aug 11 20:21:45 2012] Off-axis axis estimate = 0.86'
[Sat Aug 11 20:28:44 2012] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 20:28:44 2012] Initial guess for spatial extent in simple fitting = 6.86"
[Sat Aug 11 20:28:44 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.928
[Sat Aug 11 20:28:44 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 6.86"
[Sun Aug 12 03:28:23 2012] fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_src43.ximg exists
[Sun Aug 12 03:28:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_src43.csv
[Sun Aug 12 03:28:23 2012] fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_src43_1.ximg exists
[Sun Aug 12 03:28:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_src43.csv
[Sun Aug 12 03:28:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 03:28:26 2012] fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sun Aug 12 03:28:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sun Aug 12 03:28:26 2012] fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sun Aug 12 03:28:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sun Aug 12 03:28:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 12:46:28 2012] Source 48 is offset by -3.458649 and 2.420892 pixels which is larger than
2 X fitted extent = 0.826464 x 0.826464, not incorporating fit results
[Sun Aug 12 12:46:28 2012] Warning, spatial fit 43 centroid is now closest to src. 50
[Sun Aug 12 12:46:28 2012] Spatial fit model total counts = 7271.530000, observed total counts = 5988.000000
[Sun Aug 12 12:46:28 2012] Poor agreement between spatial fit and data for source 48
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 12 12:46:28 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 12:46:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 12:46:28 2012] Assessing source extent using major
[Sun Aug 12 12:46:28 2012] Source does appear to be extended
[Sun Aug 12 12:46:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 12:46:29 2012] Source is confused with source 44
[Sun Aug 12 12:47:55 2012] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 12:47:55 2012] Initial guess for spatial extent in simple fitting = 6.86"
[Sun Aug 12 12:47:55 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.928
[Sun Aug 12 12:47:55 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 6.86"
[Sun Aug 12 20:38:55 2012] fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_src35.ximg exists
[Sun Aug 12 20:38:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_src35.csv
[Sun Aug 12 20:38:55 2012] fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_src35_1.ximg exists
[Sun Aug 12 20:38:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_src35.csv
[Sun Aug 12 20:38:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 20:38:58 2012] fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sun Aug 12 20:38:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun Aug 12 20:38:58 2012] fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sun Aug 12 20:38:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun Aug 12 20:38:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 04:30:46 2012] Source 48 is offset by -3.458649 and 2.420111 pixels which is larger than
2 X fitted extent = 0.826464 x 0.826464, not incorporating fit results
[Mon Aug 13 04:30:46 2012] Spatial fit model total counts = 7585.900000, observed total counts = 6562.000000
[Mon Aug 13 04:30:46 2012] Poor agreement between spatial fit and data for source 48
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 13 04:30:47 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 04:30:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 04:30:47 2012] Assessing source extent using major
[Mon Aug 13 04:30:47 2012] Source does appear to be extended
[Mon Aug 13 04:30:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 04:31:31 2012] XMMSAS src. selection expression = ellipse(26828.377502, 25438.323639, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 13 04:31:31 2012] Writing source region out to fullrun_pn_xmm0654760201_pi300-10000_pass1_cl_src48_src.reg
[Mon Aug 13 04:31:31 2012] Extracting stamp from image fullrun_pn_xmm0654760201_pi300-10000_cl_sm2.00.img.gz, (271, 255) - (346, 330)
[Mon Aug 13 04:31:31 2012] XMMSAS bgd. selection expression = annulus(26828.377502, 25438.323639, 1087.500000, 2175.000000, X, Y) && !ellipse(28695.601196, 26365.364288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25254.002000, 27877.840000, 1197.904034, 1197.904034, 0.000000, X, Y) && !ellipse(25608.783200, 27229.984000, 1150.576033, 1150.576033, 0.000000, X, Y) && !ellipse(27747.445099, 27166.771606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26202.757019, 26828.406708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27811.675568, 26748.376160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24198.860382, 26561.560333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27135.792725, 26573.184052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26727.889954, 26214.540039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24772.341400, 26290.773895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27779.432892, 26136.004272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24193.815826, 26066.676147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27738.975555, 25786.443115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26392.862427, 25355.234497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25844.604187, 25343.454132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27845.694458, 25133.762573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25698.503235, 24914.194305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27268.607910, 24739.381866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28348.291504, 24770.615631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25496.550000, 24353.666000, 1123.760032, 1123.760032, 0.000000, X, Y) && !ellipse(24161.695282, 24573.628387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27348.072937, 24321.459015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24415.484222, 23874.524658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24228.559540, 23525.552917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25562.905579, 23370.783295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27478.339294, 23426.307922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24565.973938, 23178.861847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24999.436676, 23187.997803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24313.605438, 22753.427917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25371.316000, 20631.008000, 2759.936079, 2759.936079, 0.000000, X, Y)
[Mon Aug 13 04:31:31 2012] Writing fullrun_pn_xmm0654760201_pi300-10000_pass1_cl_src48.gif
[Mon Aug 13 05:04:04 2012] Mean detx,y = (-1574.12, 633.82) 
[Mon Aug 13 05:04:07 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 05:04:28 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 05:04:28 2012] Setting source spectrum file to fullrun_pn_xmm0654760201_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Mon Aug 13 05:04:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0654760201_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Mon Aug 13 06:48:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 13 06:48:33 2012] rmf not generated due to insufficient counts
[Tue Aug 14 14:25:12 2012] Updating aperture counts using extracted products
[Tue Aug 14 14:25:12 2012] Error reading totcts from fullrun_pn_xmm0654760201_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Tue Aug 14 14:25:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 14:25:21 2012] Using photon index=1.80, rate=0.0223, arf fullrun_pn_xmm0654760201_pi300-10000_pass1_cl_src48.arf
[Tue Aug 14 14:25:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 14:25:21 2012] Updating source flux to 7.1e-14
[Tue Aug 14 14:44:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting