[Sat Aug 11 20:21:41 2012] Detection parameters:
  Position = (301.7, 308.9) = 8 29 32.17 -48 28 4.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 373.8 +/- 42.6
  Background counts = 701.7
  Rate = 0.02 +/- 0.002

[Sat Aug 11 20:21:45 2012] Off-axis axis estimate = 0.80'
[Sat Aug 11 20:28:44 2012] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 20:28:44 2012] Initial guess for spatial extent in simple fitting = 6.83"
[Sat Aug 11 20:28:44 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.934
[Sat Aug 11 20:28:44 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 6.83"
[Sun Aug 12 03:28:23 2012] fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_src30.ximg exists
[Sun Aug 12 03:28:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_src30.csv
[Sun Aug 12 03:28:23 2012] fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_src30_1.ximg exists
[Sun Aug 12 03:28:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_src30.csv
[Sun Aug 12 03:28:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 03:28:26 2012] fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sun Aug 12 03:28:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sun Aug 12 03:28:26 2012] fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sun Aug 12 03:28:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sun Aug 12 03:28:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 12:46:28 2012] Spatial fit model total counts = 7003.420000, observed total counts = 5839.000000
[Sun Aug 12 12:46:28 2012] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 12 12:46:28 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 12:46:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 12:46:28 2012] Assessing source extent using major
[Sun Aug 12 12:46:28 2012] Source does appear to be extended
[Sun Aug 12 12:46:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 12:46:29 2012] Source is confused with source 29
[Sun Aug 12 12:47:55 2012] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 12:47:55 2012] Initial guess for spatial extent in simple fitting = 6.83"
[Sun Aug 12 12:47:55 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.934
[Sun Aug 12 12:47:55 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 6.83"
[Sun Aug 12 20:38:55 2012] fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_src24.ximg exists
[Sun Aug 12 20:38:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_src24.csv
[Sun Aug 12 20:38:55 2012] fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_src24_1.ximg exists
[Sun Aug 12 20:38:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_src24.csv
[Sun Aug 12 20:38:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 20:38:57 2012] fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sun Aug 12 20:38:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sun Aug 12 20:38:57 2012] fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sun Aug 12 20:38:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sun Aug 12 20:38:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 04:30:46 2012] Source 33 is offset by 3.498357 and 5.084307 pixels which is larger than
2 X fitted extent = 0.785412 x 0.785412, not incorporating fit results
[Mon Aug 13 04:30:47 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 04:30:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 04:30:47 2012] Assessing source extent using major
[Mon Aug 13 04:30:47 2012] Source does appear to be extended
[Mon Aug 13 04:30:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 04:31:30 2012] XMMSAS src. selection expression = ellipse(26202.757019, 26828.406708, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 13 04:31:30 2012] Writing source region out to fullrun_pn_xmm0654760201_pi300-10000_pass1_cl_src33_src.reg
[Mon Aug 13 04:31:30 2012] Extracting stamp from image fullrun_pn_xmm0654760201_pi300-10000_cl_sm2.00.img.gz, (264, 271) - (339, 346)
[Mon Aug 13 04:31:31 2012] XMMSAS bgd. selection expression = annulus(26202.757019, 26828.406708, 1087.500000, 2175.000000, X, Y) && !ellipse(28695.601196, 26365.364288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.470673, 29451.174744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24724.669800, 29083.944000, 1281.456037, 1281.456037, 0.000000, X, Y) && !ellipse(25254.002000, 27877.840000, 1197.904034, 1197.904034, 0.000000, X, Y) && !ellipse(25608.783200, 27229.984000, 1150.576033, 1150.576033, 0.000000, X, Y) && !ellipse(27747.445099, 27166.771606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27811.675568, 26748.376160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24198.860382, 26561.560333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27135.792725, 26573.184052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26727.889954, 26214.540039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24772.341400, 26290.773895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27779.432892, 26136.004272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24193.815826, 26066.676147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27738.975555, 25786.443115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26392.862427, 25355.234497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25844.604187, 25343.454132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27845.694458, 25133.762573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26828.377502, 25438.323639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25698.503235, 24914.194305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27268.607910, 24739.381866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28348.291504, 24770.615631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25496.550000, 24353.666000, 1123.760032, 1123.760032, 0.000000, X, Y) && !ellipse(24161.695282, 24573.628387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23514.253320, 24598.780400, 711.871220, 711.871220, 0.000000, X, Y) && !ellipse(23720.955109, 24152.702698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27348.072937, 24321.459015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24415.484222, 23874.524658, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 13 04:31:31 2012] Writing fullrun_pn_xmm0654760201_pi300-10000_pass1_cl_src33.gif
[Mon Aug 13 04:55:44 2012] Mean detx,y = (-1617.75, 2169.41) 
[Mon Aug 13 04:55:47 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 04:56:04 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 04:56:05 2012] Setting source spectrum file to fullrun_pn_xmm0654760201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Mon Aug 13 04:56:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0654760201_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Mon Aug 13 06:45:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 13 06:45:34 2012] rmf not generated due to insufficient counts
[Tue Aug 14 14:25:11 2012] Updating aperture counts using extracted products
[Tue Aug 14 14:25:11 2012] Error reading totcts from fullrun_pn_xmm0654760201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Aug 14 14:25:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 14:25:20 2012] Using photon index=1.80, rate=0.0161, arf fullrun_pn_xmm0654760201_pi300-10000_pass1_cl_src33.arf
[Tue Aug 14 14:25:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 14:25:21 2012] Updating source flux to 5.2e-14
[Tue Aug 14 14:44:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting