[Sat Aug 11 20:23:35 2012] Detection parameters:
  Position = (202.5, 172.8) = 8 30 15.73 -48 37 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.2 +/- 15.8
  Background counts = 43.5
  Rate = 0.005 +/- 0.001

[Sat Aug 11 20:23:35 2012] Off-axis axis estimate = 11.46'
[Sun Aug 12 07:33:50 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 07:33:50 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Sun Aug 12 07:33:50 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.967
[Sun Aug 12 07:33:50 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 12.16"
[Sun Aug 12 12:45:45 2012] fullrun_mos2_xmm0654760201_pi300-10000_cl_pass0_src14.ximg exists
[Sun Aug 12 12:45:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654760201_pi300-10000_cl_pass0_src14.csv
[Sun Aug 12 12:45:45 2012] fullrun_mos2_xmm0654760201_pi300-10000_cl_pass0_src14_1.ximg exists
[Sun Aug 12 12:45:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654760201_pi300-10000_cl_pass0_src14.csv
[Sun Aug 12 12:45:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0654760201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0654760201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 12:45:47 2012] fullrun_mos2_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sun Aug 12 12:45:47 2012] fullrun_mos2_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sun Aug 12 12:45:47 2012] Fit fullrun_mos2_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sun Aug 12 12:47:17 2012] Warning, spatial fit 14 centroid is now closest to src. 70
[Sun Aug 12 12:47:17 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 12:47:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 12:47:17 2012] Assessing source extent using major
[Sun Aug 12 12:47:17 2012] Source does appear to be extended
[Sun Aug 12 12:47:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 12:47:17 2012] Source is confused with source 73
[Sun Aug 12 23:54:06 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 23:54:06 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Sun Aug 12 23:54:06 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.967
[Sun Aug 12 23:54:06 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 12.16"
[Mon Aug 13 04:30:20 2012] fullrun_mos2_xmm0654760201_pi300-10000_cl_pass1_src10.ximg exists
[Mon Aug 13 04:30:20 2012] fullrun_mos2_xmm0654760201_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Aug 13 04:30:20 2012] Fit fullrun_mos2_xmm0654760201_pi300-10000_cl_pass1_src10 appears to have run properly
[Mon Aug 13 04:30:21 2012] fullrun_mos2_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Aug 13 04:30:21 2012] fullrun_mos2_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Aug 13 04:30:21 2012] Fit fullrun_mos2_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Mon Aug 13 04:31:09 2012] Warning, spatial fit 10 centroid is now closest to src. 11
[Mon Aug 13 04:31:09 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 71 at 10.482160 pixels away
[Mon Aug 13 04:31:09 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 04:31:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 04:31:09 2012] Assessing source extent using major
[Mon Aug 13 04:31:09 2012] Source does appear to be extended
[Mon Aug 13 04:31:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 11:12:13 2012] XMMSAS src. selection expression = ellipse(17566.185669, 14988.221252, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 14 11:12:13 2012] Writing source region out to fullrun_mos2_xmm0654760201_pi300-10000_pass1_cl_src71_src.reg
[Tue Aug 14 11:12:13 2012] Extracting stamp from image fullrun_mos2_xmm0654760201_pi300-10000_cl_sm2.00.img.gz, (165, 135) - (240, 210)
[Tue Aug 14 11:12:13 2012] XMMSAS bgd. selection expression = annulus(17566.185669, 14988.221252, 1087.500000, 2175.000000, X, Y) && !ellipse(13747.436000, 16117.660400, 3887.320112, 3887.320112, 0.000000, X, Y) && !ellipse(16673.482000, 14851.156000, 1453.456042, 1453.456042, 0.000000, X, Y) && !ellipse(16245.270400, 17398.362000, 1920.720055, 1920.720055, 0.000000, X, Y) && !ellipse(17468.191193, 17336.505722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19132.579941, 14288.859985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13898.392000, 16449.142000, 4241.072122, 4241.072122, 0.000000, X, Y) && !ellipse(17911.860800, 14781.728000, 1923.408055, 1923.408055, 0.000000, X, Y) && !ellipse(16603.754000, 14494.658000, 3367.136097, 3367.136097, 0.000000, X, Y) && !ellipse(17227.574000, 16318.674000, 1852.944053, 1852.944053, 0.000000, X, Y) && !ellipse(17129.043060, 14396.559921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15346.736496, 15783.271103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15040.726000, 15960.928000, 1992.928057, 1992.928057, 0.000000, X, Y) && !ellipse(16167.350000, 15223.406000, 2004.640058, 2004.640058, 0.000000, X, Y) && !ellipse(15838.019135, 15538.149506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18341.357400, 13613.736000, 1685.416048, 1685.416048, 0.000000, X, Y) && !ellipse(16504.241653, 16401.659286, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 14 11:12:13 2012] Writing fullrun_mos2_xmm0654760201_pi300-10000_pass1_cl_src71.gif
[Tue Aug 14 11:42:54 2012] Mean detx,y = (-11182.32, 4517.64) 
[Tue Aug 14 11:42:56 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 11:43:19 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 11:43:20 2012] Setting source spectrum file to fullrun_mos2_xmm0654760201_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Tue Aug 14 11:43:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0654760201_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Tue Aug 14 12:52:20 2012] Not generating rmf since there are only 82 counts
[Tue Aug 14 12:52:20 2012] rmf not generated due to insufficient counts
[Tue Aug 14 14:25:31 2012] Updating aperture counts using extracted products
[Tue Aug 14 14:25:31 2012] Error reading totcts from fullrun_mos2_xmm0654760201_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Tue Aug 14 14:25:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 14:25:35 2012] Using photon index=1.80, rate=0.00517, arf fullrun_mos2_xmm0654760201_pi300-10000_pass1_cl_src71.arf
[Tue Aug 14 14:25:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 14:25:35 2012] Updating source flux to 1e-13
[Tue Aug 14 14:35:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting