[Sat Aug 11 20:22:35 2012] Detection parameters:
  Position = (321.4, 278.4) = 8 29 23.58 -48 30 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.3 +/- 18.3
  Background counts = 126.2
  Rate = 0.004 +/- 0.0007

[Sat Aug 11 20:22:37 2012] Off-axis axis estimate = 2.21'
[Sun Aug 12 03:28:29 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 03:28:29 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Sun Aug 12 03:28:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 22, frac = 1.104
[Sun Aug 12 03:28:29 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 7.53"
[Sun Aug 12 07:33:48 2012] fullrun_mos1_xmm0654760201_pi300-10000_cl_pass0_src39.ximg exists
[Sun Aug 12 07:33:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0654760201_pi300-10000_cl_pass0_src39.csv
[Sun Aug 12 07:33:48 2012] fullrun_mos1_xmm0654760201_pi300-10000_cl_pass0_src39_1.ximg exists
[Sun Aug 12 07:33:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0654760201_pi300-10000_cl_pass0_src39.csv
[Sun Aug 12 07:33:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0654760201_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0654760201_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 07:33:49 2012] fullrun_mos1_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sun Aug 12 07:33:49 2012] fullrun_mos1_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sun Aug 12 07:33:49 2012] Fit fullrun_mos1_xmm0654760201_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Sun Aug 12 12:46:52 2012] Source 25 is offset by -0.582757 and 6.647265 pixels which is larger than
2 X fitted extent = 3.194602 x 3.194602, not incorporating fit results
[Sun Aug 12 12:46:52 2012] Source 25 is offset by -2.189401 and 6.347242 pixels which is larger than
2 X fitted extent = 3.866864 x 3.866864, not incorporating fit results
[Sun Aug 12 12:46:52 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 12:46:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 12:46:52 2012] Assessing source extent using major
[Sun Aug 12 12:46:52 2012] Source does appear to be extended
[Sun Aug 12 12:46:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 12:46:53 2012] Source is confused with source 36
[Sun Aug 12 20:39:00 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 20:39:00 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Sun Aug 12 20:39:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 22, frac = 1.104
[Sun Aug 12 20:39:00 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 7.53"
[Sun Aug 12 23:54:04 2012] fullrun_mos1_xmm0654760201_pi300-10000_cl_pass1_src32.ximg exists
[Sun Aug 12 23:54:04 2012] fullrun_mos1_xmm0654760201_pi300-10000_cl_pass1_src32_1.ximg exists
[Sun Aug 12 23:54:04 2012] Fit fullrun_mos1_xmm0654760201_pi300-10000_cl_pass1_src32 appears to have run properly
[Sun Aug 12 23:54:05 2012] fullrun_mos1_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sun Aug 12 23:54:05 2012] fullrun_mos1_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sun Aug 12 23:54:05 2012] Fit fullrun_mos1_xmm0654760201_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Mon Aug 13 04:30:57 2012] Source 25 is offset by -0.633516 and 6.711863 pixels which is larger than
2 X fitted extent = 3.091058 x 3.091058, not incorporating fit results
[Mon Aug 13 04:30:57 2012] Source 25 is offset by -1.209718 and 6.345311 pixels which is larger than
2 X fitted extent = 6.926069 x 2.187012, not incorporating fit results
[Mon Aug 13 04:30:57 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 04:30:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 04:30:57 2012] Assessing source extent using major
[Mon Aug 13 04:30:57 2012] Source does appear to be extended
[Mon Aug 13 04:30:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 08:16:32 2012] XMMSAS src. selection expression = ellipse(27911.024109, 24174.142059, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 13 08:16:32 2012] Writing source region out to fullrun_mos1_xmm0654760201_pi300-10000_pass1_cl_src25_src.reg
[Mon Aug 13 08:16:32 2012] Extracting stamp from image fullrun_mos1_xmm0654760201_pi300-10000_cl_sm2.00.img.gz, (284, 241) - (359, 316)
[Mon Aug 13 08:16:32 2012] XMMSAS bgd. selection expression = annulus(27911.024109, 24174.142059, 1087.500000, 2175.000000, X, Y) && !ellipse(27969.259180, 23558.045200, 631.625618, 631.625618, 0.000000, X, Y) && !ellipse(25601.716000, 20843.987000, 1384.288040, 1384.288040, 0.000000, X, Y) && !ellipse(28588.422974, 24012.926025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24886.823608, 22056.496002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25237.861600, 20665.617600, 1383.232040, 1383.232040, 0.000000, X, Y) && !ellipse(27062.858000, 25308.894000, 1139.336033, 1139.336033, 0.000000, X, Y) && !ellipse(27222.131000, 25493.564600, 1108.000032, 1108.000032, 0.000000, X, Y) && !ellipse(25926.166000, 20445.392000, 2768.576080, 2768.576080, 0.000000, X, Y) && !ellipse(27325.697000, 24181.954000, 1058.536030, 1058.536030, 0.000000, X, Y) && !ellipse(25553.605011, 21659.141663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25482.824600, 23471.834000, 910.360026, 910.360026, 0.000000, X, Y) && !ellipse(26284.441650, 25622.941101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26771.727142, 25008.968231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27492.546356, 22565.581940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.274000, 23095.169600, 942.592027, 942.592027, 0.000000, X, Y) && !ellipse(25462.938416, 24130.328766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26975.925446, 26017.096130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27657.590942, 25274.003876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25575.866000, 23348.100780, 1203.008035, 1203.008035, 0.000000, X, Y) && !ellipse(28013.218842, 25864.609833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27875.736115, 26575.257629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26245.804000, 23449.028000, 1181.976034, 1181.976034, 0.000000, X, Y) && !ellipse(25681.813721, 25737.856079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25120.703400, 25949.886200, 1088.000031, 1088.000031, 0.000000, X, Y) && !ellipse(25471.729218, 24575.322296, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 13 08:16:32 2012] Writing fullrun_mos1_xmm0654760201_pi300-10000_pass1_cl_src25.gif
[Mon Aug 13 08:36:54 2012] Mean detx,y = (1022.31, -2358.79) 
[Mon Aug 13 08:36:55 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 08:37:05 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 08:37:05 2012] Setting source spectrum file to fullrun_mos1_xmm0654760201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon Aug 13 08:37:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0654760201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Aug 14 10:21:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 14 10:21:25 2012] rmf not generated due to insufficient counts
[Tue Aug 14 14:25:27 2012] Updating aperture counts using extracted products
[Tue Aug 14 14:25:27 2012] Error reading totcts from fullrun_mos1_xmm0654760201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Aug 14 14:25:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 14:25:30 2012] Using photon index=1.80, rate=0.00396, arf fullrun_mos1_xmm0654760201_pi300-10000_pass1_cl_src25.arf
[Tue Aug 14 14:25:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 14:25:30 2012] Updating source flux to 4.3e-14
[Tue Aug 14 14:25:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting