[Fri Aug  9 01:11:13 2013] Detection parameters:
  Position = (311.3, 429.1) = 21 6 4.11 38 55 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.5 +/- 8.4
  Background counts = 10.7
  Rate = 0.004 +/- 0.0009

[Fri Aug  9 01:11:13 2013] Off-axis axis estimate = 9.52'
[Fri Aug  9 01:12:05 2013] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Fri Aug  9 01:12:05 2013] Initial guess for spatial extent in simple fitting = 11.19"
[Fri Aug  9 01:12:05 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.954
[Fri Aug  9 01:12:05 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.19"
[Fri Aug  9 01:22:22 2013] fullrun_pn_xmm0654550701_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug  9 01:22:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654550701_pi300-10000_cl_pass0_src3.csv
[Fri Aug  9 01:22:22 2013] fullrun_pn_xmm0654550701_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug  9 01:22:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654550701_pi300-10000_cl_pass0_src3.csv
[Fri Aug  9 01:22:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654550701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654550701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  9 01:22:22 2013] fullrun_pn_xmm0654550701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug  9 01:22:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654550701_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Aug  9 01:22:22 2013] fullrun_pn_xmm0654550701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug  9 01:22:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654550701_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Aug  9 01:22:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654550701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654550701_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  9 01:36:58 2013] Spatial fit model total counts = 129.636000, observed total counts = 117.000000
[Fri Aug  9 01:36:58 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug  9 01:36:58 2013] Vigneting correction estimate = 1.000000
[Fri Aug  9 01:36:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  9 01:36:58 2013] Assessing source extent using major
[Fri Aug  9 01:36:58 2013] Source does appear to be extended
[Fri Aug  9 01:36:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  9 01:36:58 2013] Deleting source due to low Poisson probability 0.9