[Sun Jul 22 06:40:15 2012] Detection parameters:
  Position = (278.1, 291.9) = 20 48 10.78 -17 50 2.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 209.0 +/- 22.1
  Background counts = 82.8
  Rate = 0.005 +/- 0.0005

[Sun Jul 22 06:40:16 2012] Off-axis axis estimate = 1.55'
[Sun Jul 22 15:45:30 2012] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 15:45:30 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Sun Jul 22 15:45:30 2012] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.699
[Sun Jul 22 15:45:30 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.20"
[Sun Jul 22 19:21:31 2012] fullrun_mos2_xmm0654440401_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jul 22 19:21:31 2012] fullrun_mos2_xmm0654440401_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jul 22 19:21:31 2012] Fit fullrun_mos2_xmm0654440401_pi300-10000_cl_pass0_src11 appears to have run properly
[Sun Jul 22 19:21:33 2012] fullrun_mos2_xmm0654440401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jul 22 19:21:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654440401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jul 22 19:21:33 2012] fullrun_mos2_xmm0654440401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jul 22 19:21:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654440401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jul 22 19:21:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0654440401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0654440401_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 19:22:15 2012] Warning, spatial fit 11 centroid is now closest to src. 52
[Sun Jul 22 19:22:15 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 19:22:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 19:22:15 2012] Assessing source extent using major
[Sun Jul 22 19:22:15 2012] Source does appear to be extended
[Sun Jul 22 19:22:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 19:22:15 2012] Source is confused with source 15
[Sun Jul 22 23:39:53 2012] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 23:39:53 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Sun Jul 22 23:39:53 2012] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.699
[Sun Jul 22 23:39:53 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.20"
[Mon Jul 23 02:20:18 2012] fullrun_mos2_xmm0654440401_pi300-10000_cl_pass1_src8.ximg exists
[Mon Jul 23 02:20:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654440401_pi300-10000_cl_pass1_src8.csv
[Mon Jul 23 02:20:18 2012] fullrun_mos2_xmm0654440401_pi300-10000_cl_pass1_src8_1.ximg exists
[Mon Jul 23 02:20:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654440401_pi300-10000_cl_pass1_src8.csv
[Mon Jul 23 02:20:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0654440401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0654440401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 02:20:19 2012] fullrun_mos2_xmm0654440401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Mon Jul 23 02:20:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654440401_pi300-10000_cl_pass1_tfrozen_src8.csv
[Mon Jul 23 02:20:19 2012] fullrun_mos2_xmm0654440401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Mon Jul 23 02:20:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654440401_pi300-10000_cl_pass1_tfrozen_src8.csv
[Mon Jul 23 02:20:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0654440401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0654440401_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 02:20:53 2012] Warning, spatial fit 8 centroid is now closest to src. 10
[Mon Jul 23 02:20:53 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 02:20:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 02:20:53 2012] Assessing source extent using major
[Mon Jul 23 02:20:53 2012] Source does appear to be extended
[Mon Jul 23 02:20:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 04:26:25 2012] XMMSAS src. selection expression = ellipse(24141.917969, 25343.982483, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 23 04:26:25 2012] Writing source region out to fullrun_mos2_xmm0654440401_pi300-10000_pass1_cl_src11_src.reg
[Mon Jul 23 04:26:25 2012] Extracting stamp from image fullrun_mos2_xmm0654440401_pi300-10000_cl_sm2.00.img.gz, (241, 254) - (316, 329)
[Mon Jul 23 04:26:25 2012] XMMSAS bgd. selection expression = annulus(24141.917969, 25343.982483, 1087.500000, 2175.000000, X, Y) && !ellipse(25100.289800, 23385.261400, 1203.672035, 1203.672035, 0.000000, X, Y) && !ellipse(23974.839630, 24823.185211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.403137, 25788.333496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24629.402588, 26388.218781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24545.976257, 23786.367065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23282.904480, 24923.747101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25347.314545, 24650.499451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24553.513885, 24484.400818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26868.924000, 25349.836800, 798.500823, 798.500823, 0.000000, X, Y) && !ellipse(23983.887970, 26658.306946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25664.439209, 23799.089966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26566.510000, 25352.940000, 1103.896032, 1103.896032, 0.000000, X, Y) && !ellipse(25867.463989, 24402.777252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24961.424622, 25960.159027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24158.639343, 24308.794525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24751.210022, 27067.425720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26052.307129, 26407.226135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26572.480469, 26053.533752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23543.856000, 24304.563200, 1068.352031, 1068.352031, 0.000000, X, Y) && !ellipse(23514.847839, 23432.018890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24224.853119, 27301.716125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25134.407745, 25350.511200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26038.726654, 23686.561859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23103.182892, 25612.825439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23612.040497, 27338.838745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26565.784485, 24125.462097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25762.861145, 23077.946838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26421.783661, 26480.247406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22506.584534, 25429.139893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22292.010376, 23454.634430, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 04:26:25 2012] Writing fullrun_mos2_xmm0654440401_pi300-10000_pass1_cl_src11.gif
[Mon Jul 23 04:28:10 2012] Mean detx,y = (-216.82, -463.86) 
[Mon Jul 23 04:28:11 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 04:28:19 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 04:28:19 2012] Setting source spectrum file to fullrun_mos2_xmm0654440401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon Jul 23 04:28:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0654440401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon Jul 23 04:52:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 23 04:52:18 2012] rmf not generated due to insufficient counts
[Mon Jul 23 05:17:23 2012] Updating aperture counts using extracted products
[Mon Jul 23 05:17:23 2012] Error reading totcts from fullrun_mos2_xmm0654440401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon Jul 23 05:17:23 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 05:17:23 2012] Using photon index=1.80, rate=0.0052, arf fullrun_mos2_xmm0654440401_pi300-10000_pass1_cl_src11.arf
[Mon Jul 23 05:17:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 05:17:23 2012] Updating source flux to 5.8e-14
[Mon Jul 23 05:18:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting