[Sat Mar 17 10:51:07 2012] Detection parameters:
  Position = (311.0, 270.0) = 21 29 36.85 -50 48 57.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 282.7 +/- 31.0
  Background counts = 214.4
  Rate = 0.004 +/- 0.0004

[Sat Mar 17 10:51:08 2012] Off-axis axis estimate = 2.25'
[Sat Mar 17 15:29:07 2012] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Sat Mar 17 15:29:07 2012] Initial guess for spatial extent in simple fitting = 7.56"
[Sat Mar 17 15:29:07 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.799
[Sat Mar 17 15:29:07 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.56"
[Sat Mar 17 16:59:37 2012] fullrun_mos2_xmm0654440201_pi300-10000_cl_pass0_src9.ximg exists
[Sat Mar 17 16:59:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654440201_pi300-10000_cl_pass0_src9.csv
[Sat Mar 17 16:59:37 2012] fullrun_mos2_xmm0654440201_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Mar 17 16:59:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654440201_pi300-10000_cl_pass0_src9.csv
[Sat Mar 17 16:59:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0654440201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0654440201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 17 16:59:38 2012] fullrun_mos2_xmm0654440201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Mar 17 16:59:38 2012] fullrun_mos2_xmm0654440201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Mar 17 16:59:38 2012] Fit fullrun_mos2_xmm0654440201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Mar 17 17:00:17 2012] Source 16 is offset by -0.582396 and 3.891151 pixels which is larger than
2 X fitted extent = 6.884644 x 0.860579, not incorporating fit results
[Sat Mar 17 17:00:17 2012] Spatial fit model total counts = 3688.170000, observed total counts = 3689.000000
[Sat Mar 17 17:00:17 2012] Offset between fit and detection position for source 16 = 2.757152 pixels
[Sat Mar 17 17:00:17 2012] 3538.355000 total counts/ 3198.580000 bgd. counts: snr = 6.007763
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 2.757152 pixels
  Position = (313.8, 270.0) = 21 29 35.59 -50 48 57.2
  Extent = 15.1 (15.1-30.2)", rotation angle = 0
  Source counts = 339.8 +/- 59.5
  Background counts = 3198.6
  Rate = 0.004 +/- 0.0008
[Sat Mar 17 17:00:17 2012] Vigneting correction estimate = 1.000000
[Sat Mar 17 17:00:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 17 17:00:17 2012] Assessing source extent using major axis lower bound
[Sat Mar 17 17:00:17 2012] Source does appear to be extended
[Sat Mar 17 17:00:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 17:00:17 2012] Source is confused with source 13
[Sat Mar 17 20:22:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 17 20:22:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 17 20:22:03 2012] Initial guess for spatial extent in simple fitting = 15.11"
[Sat Mar 17 20:22:03 2012] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.013
[Sat Mar 17 20:22:03 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 15.11"
[Sat Mar 17 21:49:52 2012] fullrun_mos2_xmm0654440201_pi300-10000_cl_pass1_src9.ximg exists
[Sat Mar 17 21:49:52 2012] fullrun_mos2_xmm0654440201_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Mar 17 21:49:52 2012] Fit fullrun_mos2_xmm0654440201_pi300-10000_cl_pass1_src9 appears to have run properly
[Sat Mar 17 21:49:53 2012] fullrun_mos2_xmm0654440201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Mar 17 21:49:53 2012] fullrun_mos2_xmm0654440201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Mar 17 21:49:53 2012] Fit fullrun_mos2_xmm0654440201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Mar 17 21:50:23 2012] Warning, spatial fit 9 centroid is now closest to src. 17
[Sat Mar 17 21:50:23 2012] Spatial fit model total counts = 5276.380000, observed total counts = 5275.000000
[Sat Mar 17 21:50:23 2012] Offset between fit and detection position for source 16 = 0.368192 pixels
[Sat Mar 17 21:50:23 2012] Warning, changing simple spatial fit ID from 9 to 14
[Sat Mar 17 21:50:23 2012] 5084.940000 total counts/ 3975.600000 bgd. counts: snr = 17.593949
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.368192 pixels
  Position = (314.2, 269.9) = 21 29 35.43 -50 48 57.6
  Extent = 32.2 (29.4-64.5)" x 18.8 (14.6-27.8)", rotation angle = 28 (14-40) degrees
  Source counts = 1109.3 +/- 71.3
  Background counts = 3975.6
  Rate = 0.01 +/- 0.0009
[Sat Mar 17 21:50:23 2012] Vigneting correction estimate = 1.000000
[Sat Mar 17 21:50:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 17 21:50:23 2012] Assessing source extent using major axis lower bound
[Sat Mar 17 21:50:23 2012] Source does appear to be extended
[Sat Mar 17 21:50:23 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.06
[Sun Mar 18 00:39:10 2012] Counts = 1109.340000, rescaling region sizes by 2.000000
[Sun Mar 18 00:39:10 2012] XMMSAS src. selection expression = ellipse(27282.952000, 23429.588000, 3868.008111, 2261.508065, 27.668000, X, Y)
[Sun Mar 18 00:39:10 2012] Writing source region out to fullrun_mos2_xmm0654440201_pi300-10000_pass1_cl_src16_src.reg
[Sun Mar 18 00:39:10 2012] Extracting stamp from image fullrun_mos2_xmm0654440201_pi300-10000_cl_sm2.00.img.gz, (92, 48) - (536, 492)
[Sun Mar 18 00:39:10 2012] XMMSAS bgd. selection expression = annulus(27282.952000, 23429.588000, 12893.360371, 25786.720742, X, Y) && !ellipse(21889.187920, 14291.471200, 553.372910, 553.372910, 0.000000, X, Y) && !ellipse(18443.733917, 34720.075073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31135.078800, 21164.893400, 491.588814, 491.588814, 0.000000, X, Y) && !ellipse(12405.027920, 24218.552000, 399.212011, 399.212011, 0.000000, X, Y) && !ellipse(21247.888245, 39509.033722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25574.786000, 23651.432200, 959.640028, 721.963221, 56.884000, X, Y) && !ellipse(36807.066162, 18660.887436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26460.398400, 23500.561400, 1101.576032, 1101.576032, 0.000000, X, Y) && !ellipse(15122.819290, 36842.375397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32687.311800, 19869.586000, 418.330412, 296.021609, 58.115924, X, Y) && !ellipse(10675.410400, 21086.111400, 357.698410, 357.698410, 0.000000, X, Y) && !ellipse(14574.359680, 23454.875400, 455.293613, 455.293613, 0.000000, X, Y) && !ellipse(27901.578000, 23119.582000, 1289.336037, 1289.336037, 0.000000, X, Y) && !ellipse(25728.860840, 22221.237915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40436.361115, 27154.508026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32115.764801, 26132.932404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27481.127075, 36054.689270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31865.971680, 29237.442230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25364.641266, 23093.770813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27129.018600, 18079.262200, 543.993616, 543.993616, 0.000000, X, Y) && !ellipse(12473.824875, 31891.064362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33251.671295, 13663.023117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24268.639862, 23878.337280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28635.360000, 22606.366000, 1289.336037, 1289.336037, 0.000000, X, Y) && !ellipse(12527.998093, 21236.078674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18727.543274, 14830.742172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24765.323400, 20816.984400, 1375.800040, 1375.800040, 0.000000, X, Y) && !ellipse(24789.696600, 21845.480000, 1283.624037, 1283.624037, 0.000000, X, Y) && !ellipse(38783.687683, 17704.752975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31002.059662, 36223.546478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38587.751831, 20354.687271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19381.392029, 14931.598770, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 18 00:39:10 2012] Writing fullrun_mos2_xmm0654440201_pi300-10000_pass1_cl_src16.gif
[Sun Mar 18 00:43:56 2012] Mean detx,y = (2844.09, 524.70) 
[Sun Mar 18 00:44:01 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 00:54:40 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 00:54:41 2012] Setting source spectrum file to fullrun_mos2_xmm0654440201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Mar 18 00:54:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0654440201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sun Mar 18 02:21:27 2012] Updating aperture counts using extracted products
[Sun Mar 18 02:21:27 2012] Error reading totcts from fullrun_mos2_xmm0654440201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Mar 18 02:21:29 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 02:21:29 2012] Using photon index=1.80, rate=0.0143, arf fullrun_mos2_xmm0654440201_pi300-10000_pass1_cl_src16.arf
[Sun Mar 18 02:21:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 02:21:29 2012] Updating source flux to 1.3e-13
[Sun Mar 18 02:23:38 2012] Flag b found in src. 16 procflags, skipping spectral fitting
[Sun Mar 18 02:23:38 2012] Flag c found in src. 16 procflags, skipping spectral fitting