[Sun Dec 18 06:49:22 2011] Detection parameters:
  Position = (191.3, 126.6) = 21 57 51.39 -7 59 23.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.8 +/- 16.4
  Background counts = 55.2
  Rate = 0.001 +/- 0.0002

[Sun Dec 18 06:49:24 2011] Off-axis axis estimate = 14.68'
[Sun Dec 18 09:15:18 2011] Using EEF radius (= 13.77 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 09:15:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 18 09:15:18 2011] Initial guess for spatial extent in simple fitting = 13.77"
[Sun Dec 18 09:15:18 2011] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.912
[Sun Dec 18 09:15:18 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 13.77"
[Sun Dec 18 10:33:12 2011] fullrun_mos1_xmm0654440101_pi300-10000_cl_pass0_src30.ximg exists
[Sun Dec 18 10:33:12 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0654440101_pi300-10000_cl_pass0_src30.csv
[Sun Dec 18 10:33:12 2011] fullrun_mos1_xmm0654440101_pi300-10000_cl_pass0_src30_1.ximg exists
[Sun Dec 18 10:33:12 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0654440101_pi300-10000_cl_pass0_src30.csv
[Sun Dec 18 10:33:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0654440101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0654440101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 10:33:13 2011] fullrun_mos1_xmm0654440101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sun Dec 18 10:33:13 2011] fullrun_mos1_xmm0654440101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sun Dec 18 10:33:13 2011] Fit fullrun_mos1_xmm0654440101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sun Dec 18 13:39:52 2011] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 14.154457 pixels away
[Sun Dec 18 13:39:52 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 13:39:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 13:39:52 2011] Assessing source extent using major
[Sun Dec 18 13:39:52 2011] Source does appear to be extended
[Sun Dec 18 13:39:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 16:40:08 2011] Using EEF radius (= 13.77 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 16:40:08 2011] Initial guess for spatial extent in simple fitting = 13.77"
[Sun Dec 18 16:40:08 2011] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.912
[Sun Dec 18 16:40:08 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 13.77"
[Sun Dec 18 17:30:16 2011] fullrun_mos1_xmm0654440101_pi300-10000_cl_pass1_src27.ximg exists
[Sun Dec 18 17:30:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0654440101_pi300-10000_cl_pass1_src27.csv
[Sun Dec 18 17:30:16 2011] fullrun_mos1_xmm0654440101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun Dec 18 17:30:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0654440101_pi300-10000_cl_pass1_src27.csv
[Sun Dec 18 17:30:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0654440101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0654440101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 17:30:16 2011] fullrun_mos1_xmm0654440101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun Dec 18 17:30:16 2011] fullrun_mos1_xmm0654440101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Dec 18 17:30:16 2011] Fit fullrun_mos1_xmm0654440101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sun Dec 18 19:13:51 2011] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.488717 pixels away
[Sun Dec 18 19:13:51 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 19:13:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 19:13:51 2011] Assessing source extent using major
[Sun Dec 18 19:13:51 2011] Source does appear to be extended
[Sun Dec 18 19:13:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 01:31:40 2011] XMMSAS src. selection expression = ellipse(16594.454239, 10962.493919, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 20 01:31:40 2011] Writing source region out to fullrun_mos1_xmm0654440101_pi300-10000_pass1_cl_src9_src.reg
[Tue Dec 20 01:31:40 2011] Extracting stamp from image fullrun_mos1_xmm0654440101_pi300-10000_cl_sm2.00.img.gz, (154, 89) - (229, 164)
[Tue Dec 20 01:31:40 2011] XMMSAS bgd. selection expression = annulus(16594.454239, 10962.493919, 1087.500000, 2175.000000, X, Y)
[Tue Dec 20 01:31:40 2011] Writing fullrun_mos1_xmm0654440101_pi300-10000_pass1_cl_src9.gif
[Tue Dec 20 01:47:35 2011] Mean detx,y = (15913.74, 1838.00) 
[Tue Dec 20 01:47:37 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 01:47:54 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 01:47:55 2011] Setting source spectrum file to fullrun_mos1_xmm0654440101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Dec 20 01:47:55 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0654440101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue Dec 20 02:59:45 2011] Not generating rmf since there are only 93 counts
[Tue Dec 20 02:59:45 2011] rmf not generated due to insufficient counts
[Tue Dec 20 06:47:42 2011] Updating aperture counts using extracted products
[Tue Dec 20 06:47:42 2011] Error reading totcts from fullrun_mos1_xmm0654440101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Dec 20 06:47:43 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 06:47:43 2011] Using photon index=1.80, rate=0.00101, arf fullrun_mos1_xmm0654440101_pi300-10000_pass1_cl_src9.arf
[Tue Dec 20 06:47:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 06:47:43 2011] Updating source flux to 2.6e-14
[Tue Dec 20 06:47:51 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting