[Wed May 16 21:20:43 2012] Detection parameters:
  Position = (466.0, 274.3) = 1 7 18.53 15 10 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.1 +/- 8.8
  Background counts = 8.8
  Rate = 0.002 +/- 0.0004

[Wed May 16 21:20:43 2012] Off-axis axis estimate = 12.28'
[Wed May 16 22:43:59 2012] Using EEF radius (= 12.57 ")to estimate initial spatial extent for simple fitting
[Wed May 16 22:43:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 16 22:43:59 2012] Initial guess for spatial extent in simple fitting = 12.57"
[Wed May 16 22:43:59 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.914
[Wed May 16 22:43:59 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 12.57"
[Wed May 16 23:09:14 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src10.ximg exists
[Wed May 16 23:09:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src10.csv
[Wed May 16 23:09:14 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed May 16 23:09:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src10.csv
[Wed May 16 23:09:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 23:09:14 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed May 16 23:09:14 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed May 16 23:09:14 2012] Fit fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed May 16 23:09:31 2012] Spatial fit model total counts = 128.224000, observed total counts = 126.000000
[Wed May 16 23:09:31 2012] Offset between fit and detection position for source 8 = 0.262403 pixels
[Wed May 16 23:09:31 2012] 129.541300 total counts/ 95.525800 bgd. counts: snr = 3.480299
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.262403 pixels
  Position = (465.8, 274.4) = 1 7 18.60 15 10 46.4
  Extent = 7.9 (5.7-10.9)", rotation angle = 0
  Source counts = 34.0 +/- 11.4
  Background counts = 95.5
  Rate = 0.002 +/- 0.0005
[Wed May 16 23:09:31 2012] Vigneting correction estimate = 1.000000
[Wed May 16 23:09:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 23:09:31 2012] Assessing source extent using major axis lower bound
[Wed May 16 23:09:31 2012] Source does appear to be extended
[Wed May 16 23:09:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 00:24:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 00:24:09 2012] Initial guess for spatial extent in simple fitting = 7.85"
[Thu May 17 00:24:09 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.176
[Thu May 17 00:24:09 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.85"
[Thu May 17 00:51:50 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src10.ximg exists
[Thu May 17 00:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src10.csv
[Thu May 17 00:51:50 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu May 17 00:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src10.csv
[Thu May 17 00:51:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 00:51:50 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu May 17 00:51:50 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu May 17 00:51:50 2012] Fit fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu May 17 00:52:04 2012] Spatial fit model total counts = 106.454000, observed total counts = 106.000000
[Thu May 17 00:52:04 2012] Offset between fit and detection position for source 8 = 0.040106 pixels
[Thu May 17 00:52:04 2012] 107.261800 total counts/ 71.959600 bgd. counts: snr = 4.161572
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.040106 pixels
  Position = (465.8, 274.4) = 1 7 18.59 15 10 46.4
  Extent = 8.0 (5.8-11.3)", rotation angle = 0
  Source counts = 35.3 +/- 10.4
  Background counts = 72.0
  Rate = 0.002 +/- 0.0005
[Thu May 17 00:52:04 2012] Vigneting correction estimate = 1.000000
[Thu May 17 00:52:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 00:52:04 2012] Assessing source extent using major axis lower bound
[Thu May 17 00:52:04 2012] Source does appear to be extended
[Thu May 17 00:52:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 02:01:19 2012] XMMSAS src. selection expression = ellipse(40478.903660, 23826.610800, 481.941614, 481.941614, 0.000000, X, Y)
[Thu May 17 02:01:19 2012] Writing source region out to fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src8_src.reg
[Thu May 17 02:01:19 2012] Extracting stamp from image fullrun_mos2_xmm0654080401_pi300-10000_cl_sm2.00.img.gz, (438, 247) - (494, 302)
[Thu May 17 02:01:19 2012] XMMSAS bgd. selection expression = annulus(40478.903660, 23826.610800, 803.236023, 1606.472046, X, Y)
[Thu May 17 02:01:19 2012] Writing fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src8.gif
[Thu May 17 02:04:56 2012] Mean detx,y = (-13178.34, 1546.15) 
[Thu May 17 02:04:58 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 02:05:15 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 02:05:16 2012] Setting source spectrum file to fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu May 17 02:05:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu May 17 02:11:32 2012] Not generating rmf since there are only 35 counts
[Thu May 17 02:11:32 2012] rmf not generated due to insufficient counts
[Thu May 17 02:12:36 2012] Updating aperture counts using extracted products
[Thu May 17 02:12:36 2012] Error reading totcts from fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu May 17 02:12:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 02:12:37 2012] Using photon index=1.80, rate=0.00158, arf fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src8.arf
[Thu May 17 02:12:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 02:12:37 2012] Updating source flux to 3.6e-14
[Thu May 17 02:12:48 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting