[Wed May 16 21:20:43 2012] Detection parameters:
  Position = (317.5, 312.7) = 1 8 3.17 15 13 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.8 +/- 9.2
  Background counts = 10.4
  Rate = 0.002 +/- 0.0004

[Wed May 16 21:20:43 2012] Off-axis axis estimate = 1.73'
[Wed May 16 22:43:59 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed May 16 22:43:59 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed May 16 22:43:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Wed May 16 22:43:59 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.29"
[Wed May 16 23:09:14 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src9.ximg exists
[Wed May 16 23:09:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src9.csv
[Wed May 16 23:09:14 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed May 16 23:09:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src9.csv
[Wed May 16 23:09:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 23:09:14 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed May 16 23:09:14 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed May 16 23:09:14 2012] Fit fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed May 16 23:09:31 2012] Spatial fit model total counts = 155.322000, observed total counts = 144.000000
[Wed May 16 23:09:31 2012] Offset between fit and detection position for source 7 = 0.224983 pixels
[Wed May 16 23:09:31 2012] 157.318600 total counts/ 132.314000 bgd. counts: snr = 2.173787
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.224983 pixels
  Position = (317.2, 312.7) = 1 8 3.24 15 13 33.4
  Extent = 5.2 (2.5-8.2)", rotation angle = 0
  Source counts = 25.0 +/- 12.5
  Background counts = 132.3
  Rate = 0.001 +/- 0.0006
[Wed May 16 23:09:31 2012] Vigneting correction estimate = 1.000000
[Wed May 16 23:09:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 23:09:31 2012] Assessing source extent using major axis lower bound
[Wed May 16 23:09:31 2012] Source does appear to be extended
[Wed May 16 23:09:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 00:24:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 00:24:09 2012] Initial guess for spatial extent in simple fitting = 5.17"
[Thu May 17 00:24:09 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.789
[Thu May 17 00:24:09 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 5.17"
[Thu May 17 00:51:50 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src9.ximg exists
[Thu May 17 00:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src9.csv
[Thu May 17 00:51:50 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu May 17 00:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src9.csv
[Thu May 17 00:51:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 00:51:50 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu May 17 00:51:50 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu May 17 00:51:50 2012] Fit fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu May 17 00:52:04 2012] Spatial fit model total counts = 149.386000, observed total counts = 142.000000
[Thu May 17 00:52:04 2012] Offset between fit and detection position for source 7 = 0.027612 pixels
[Thu May 17 00:52:04 2012] 151.648100 total counts/ 124.777000 bgd. counts: snr = 2.405571
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.027612 pixels
  Position = (317.2, 312.7) = 1 8 3.25 15 13 33.4
  Extent = 5.5 (2.8-8.7)", rotation angle = 0
  Source counts = 26.9 +/- 12.3
  Background counts = 124.8
  Rate = 0.001 +/- 0.0006
[Thu May 17 00:52:04 2012] Vigneting correction estimate = 1.000000
[Thu May 17 00:52:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 00:52:04 2012] Assessing source extent using major axis lower bound
[Thu May 17 00:52:04 2012] Source does appear to be extended
[Thu May 17 00:52:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 02:01:19 2012] XMMSAS src. selection expression = ellipse(27549.208200, 27159.187200, 329.480409, 329.480409, 0.000000, X, Y)
[Thu May 17 02:01:19 2012] Writing source region out to fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src7_src.reg
[Thu May 17 02:01:19 2012] Extracting stamp from image fullrun_mos2_xmm0654080401_pi300-10000_cl_sm2.00.img.gz, (298, 294) - (336, 332)
[Thu May 17 02:01:19 2012] XMMSAS bgd. selection expression = annulus(27549.208200, 27159.187200, 549.134016, 1098.268032, X, Y)
[Thu May 17 02:01:19 2012] Writing fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src7.gif
[Thu May 17 02:04:33 2012] Mean detx,y = (108.06, 104.81) 
[Thu May 17 02:04:35 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 02:04:50 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 02:04:51 2012] Setting source spectrum file to fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May 17 02:04:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu May 17 02:11:23 2012] Not generating rmf since there are only 26 counts
[Thu May 17 02:11:23 2012] rmf not generated due to insufficient counts
[Thu May 17 02:12:36 2012] Updating aperture counts using extracted products
[Thu May 17 02:12:36 2012] Error reading totcts from fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May 17 02:12:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 02:12:37 2012] Using photon index=1.80, rate=0.0012, arf fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src7.arf
[Thu May 17 02:12:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 02:12:37 2012] Updating source flux to 1.5e-14
[Thu May 17 02:12:48 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting