[Wed May 16 21:20:42 2012] Detection parameters:
  Position = (356.0, 270.9) = 1 7 51.59 15 10 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 174.1 +/- 16.5
  Background counts = 9.9
  Rate = 0.009 +/- 0.0008

[Wed May 16 21:20:43 2012] Off-axis axis estimate = 4.63'
[Wed May 16 22:43:59 2012] Using EEF radius (= 8.74 ")to estimate initial spatial extent for simple fitting
[Wed May 16 22:43:59 2012] Initial guess for spatial extent in simple fitting = 8.74"
[Wed May 16 22:43:59 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.191
[Wed May 16 22:43:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.74"
[Wed May 16 23:09:14 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 16 23:09:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src1.csv
[Wed May 16 23:09:14 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 16 23:09:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src1.csv
[Wed May 16 23:09:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 23:09:14 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 16 23:09:14 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 16 23:09:14 2012] Fit fullrun_mos2_xmm0654080401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 16 23:09:31 2012] Spatial fit model total counts = 241.000000, observed total counts = 241.000000
[Wed May 16 23:09:31 2012] Offset between fit and detection position for source 2 = 0.129061 pixels
[Wed May 16 23:09:31 2012] 244.198000 total counts/ 128.975000 bgd. counts: snr = 10.145803
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.129061 pixels
  Position = (355.9, 270.8) = 1 7 51.62 15 10 30.8
  Extent = 4.9 (4.0-6.0)", rotation angle = 0
  Source counts = 115.2 +/- 15.6
  Background counts = 129.0
  Rate = 0.005 +/- 0.0007
[Wed May 16 23:09:31 2012] Vigneting correction estimate = 1.000000
[Wed May 16 23:09:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 23:09:31 2012] Assessing source extent using major axis lower bound
[Wed May 16 23:09:31 2012] Source does appear to be extended
[Wed May 16 23:09:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 00:24:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 00:24:09 2012] Initial guess for spatial extent in simple fitting = 4.86"
[Thu May 17 00:24:09 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.148
[Thu May 17 00:24:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.86"
[Thu May 17 00:51:50 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 17 00:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src1.csv
[Thu May 17 00:51:50 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 17 00:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src1.csv
[Thu May 17 00:51:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 00:51:50 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 17 00:51:50 2012] fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 17 00:51:50 2012] Fit fullrun_mos2_xmm0654080401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 17 00:52:04 2012] Spatial fit model total counts = 239.000000, observed total counts = 239.000000
[Thu May 17 00:52:04 2012] Offset between fit and detection position for source 2 = 0.026066 pixels
[Thu May 17 00:52:04 2012] 239.640000 total counts/ 129.025000 bgd. counts: snr = 9.738164
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.026066 pixels
  Position = (355.9, 270.8) = 1 7 51.61 15 10 30.9
  Extent = 4.6 (3.9-5.8)", rotation angle = 0
  Source counts = 110.6 +/- 15.5
  Background counts = 129.0
  Rate = 0.005 +/- 0.0007
[Thu May 17 00:52:04 2012] Vigneting correction estimate = 1.000000
[Thu May 17 00:52:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 00:52:04 2012] Assessing source extent using major axis lower bound
[Thu May 17 00:52:04 2012] Source does appear to be extended
[Thu May 17 00:52:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 02:01:19 2012] XMMSAS src. selection expression = ellipse(30918.115160, 23510.442000, 275.187608, 275.187608, 0.000000, X, Y)
[Thu May 17 02:01:19 2012] Writing source region out to fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src2_src.reg
[Thu May 17 02:01:19 2012] Extracting stamp from image fullrun_mos2_xmm0654080401_pi300-10000_cl_sm2.00.img.gz, (340, 255) - (372, 287)
[Thu May 17 02:01:19 2012] XMMSAS bgd. selection expression = annulus(30918.115160, 23510.442000, 458.646013, 917.292026, X, Y)
[Thu May 17 02:01:19 2012] Writing fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src2.gif
[Thu May 17 02:01:22 2012] Mean detx,y = (-4333.97, -2119.91) 
[Thu May 17 02:01:25 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 02:01:35 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 02:01:35 2012] Setting source spectrum file to fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 17 02:01:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 17 02:12:36 2012] Updating aperture counts using extracted products
[Thu May 17 02:12:36 2012] Error reading totcts from fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 17 02:12:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 02:12:36 2012] Using photon index=1.80, rate=0.00495, arf fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src2.arf
[Thu May 17 02:12:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 02:12:36 2012] Updating source flux to 6.9e-14
[Thu May 17 02:13:04 2012] Reading fit data from xmm0654080401/analysis//spectral/fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src2_pl.csv
[Thu May 17 02:13:04 2012] Spectral fit parameter nH value = 1.74348e+14
[Thu May 17 02:13:04 2012] Spectral fit parameter PhoIndex value = 1.51689
[Thu May 17 02:13:04 2012] Failed to get F(0.3-8.0) from xmm0654080401/analysis//spectral/fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu May 17 02:13:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 02:13:04 2012] Using Nh = 1.7e+14, photon index=1.52, rate=0.00495, arf fullrun_mos2_xmm0654080401_pi300-10000_pass1_cl_src2.arf
[Thu May 17 02:13:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 02:13:04 2012] Updating source flux to 8e-14