[Wed May 16 21:19:58 2012] Detection parameters:
  Position = (126.7, 294.2) = 1 9 0.51 15 12 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.7 +/- 13.6
  Background counts = 8.1
  Rate = 0.005 +/- 0.0006

[Wed May 16 21:19:58 2012] Off-axis axis estimate = 12.46'
[Wed May 16 22:27:59 2012] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Wed May 16 22:27:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 16 22:27:59 2012] Initial guess for spatial extent in simple fitting = 12.66"
[Wed May 16 22:27:59 2012] source mask rpix=2.9, npix_max = 46, mask sum = 46, frac = 0.989
[Wed May 16 22:27:59 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.66"
[Wed May 16 22:43:59 2012] fullrun_mos1_xmm0654080401_pi300-10000_cl_pass0_src2.ximg exists
[Wed May 16 22:43:59 2012] fullrun_mos1_xmm0654080401_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May 16 22:43:59 2012] Fit fullrun_mos1_xmm0654080401_pi300-10000_cl_pass0_src2 appears to have run properly
[Wed May 16 22:43:59 2012] fullrun_mos1_xmm0654080401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May 16 22:43:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0654080401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May 16 22:43:59 2012] fullrun_mos1_xmm0654080401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May 16 22:43:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0654080401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May 16 22:43:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0654080401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0654080401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 23:09:27 2012] Spatial fit model total counts = 192.989000, observed total counts = 177.000000
[Wed May 16 23:09:27 2012] Offset between fit and detection position for source 2 = 0.751213 pixels
[Wed May 16 23:09:27 2012] 196.237100 total counts/ 114.613000 bgd. counts: snr = 7.624326
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.751213 pixels
  Position = (126.9, 294.9) = 1 9 0.44 15 12 15.5
  Extent = 9.8 (7.2-13.5)" x 3.8 (3.2-5.2)", rotation angle = 95 (84-106) degrees
  Source counts = 81.6 +/- 14.0
  Background counts = 114.6
  Rate = 0.004 +/- 0.0006
[Wed May 16 23:09:27 2012] Vigneting correction estimate = 1.000000
[Wed May 16 23:09:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 23:09:27 2012] Assessing source extent using major axis lower bound
[Wed May 16 23:09:27 2012] Source does appear to be extended
[Wed May 16 23:09:27 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.38
[Thu May 17 00:12:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 00:12:13 2012] Initial guess for spatial extent in simple fitting = 6.80"
[Thu May 17 00:12:13 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.940
[Thu May 17 00:12:13 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.80"
[Thu May 17 00:24:09 2012] fullrun_mos1_xmm0654080401_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 17 00:24:09 2012] fullrun_mos1_xmm0654080401_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 17 00:24:09 2012] Fit fullrun_mos1_xmm0654080401_pi300-10000_cl_pass1_src2 appears to have run properly
[Thu May 17 00:24:09 2012] fullrun_mos1_xmm0654080401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 17 00:24:09 2012] fullrun_mos1_xmm0654080401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 17 00:24:09 2012] Fit fullrun_mos1_xmm0654080401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu May 17 00:52:00 2012] Spatial fit model total counts = 175.491000, observed total counts = 169.000000
[Thu May 17 00:52:00 2012] Offset between fit and detection position for source 2 = 0.032648 pixels
[Thu May 17 00:52:00 2012] 177.644200 total counts/ 96.520900 bgd. counts: snr = 8.257240
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.032648 pixels
  Position = (126.9, 294.9) = 1 9 0.44 15 12 15.3
  Extent = 9.8 (7.6-12.5)" x 3.7 (2.9-5.1)", rotation angle = 275 (265-286) degrees
  Source counts = 81.1 +/- 13.3
  Background counts = 96.5
  Rate = 0.004 +/- 0.0006
[Thu May 17 00:52:00 2012] Vigneting correction estimate = 1.000000
[Thu May 17 00:52:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 00:52:00 2012] Assessing source extent using major axis lower bound
[Thu May 17 00:52:00 2012] Source does appear to be extended
[Thu May 17 00:52:00 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.50
[Thu May 17 00:52:00 2012] Source is asymmetric
[Thu May 17 01:51:31 2012] XMMSAS src. selection expression = ellipse(10993.013840, 25605.740600, 588.414017, 224.174406, 274.872300, X, Y)
[Thu May 17 01:51:31 2012] Writing source region out to fullrun_mos1_xmm0654080401_pi300-10000_pass1_cl_src2_src.reg
[Thu May 17 01:51:31 2012] Extracting stamp from image fullrun_mos1_xmm0654080401_pi300-10000_cl_sm2.00.img.gz, (93, 261) - (161, 329)
[Thu May 17 01:51:31 2012] XMMSAS bgd. selection expression = annulus(10993.013840, 25605.740600, 980.690028, 1961.380056, X, Y)
[Thu May 17 01:51:31 2012] Writing fullrun_mos1_xmm0654080401_pi300-10000_pass1_cl_src2.gif
[Thu May 17 01:51:56 2012] Mean detx,y = (-6872.95, -15252.58) 
[Thu May 17 01:51:58 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 01:52:22 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 01:52:22 2012] Setting source spectrum file to fullrun_mos1_xmm0654080401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 17 01:52:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0654080401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 17 02:00:43 2012] Not generating rmf since there are only 81 counts
[Thu May 17 02:00:43 2012] rmf not generated due to insufficient counts
[Thu May 17 02:12:35 2012] Updating aperture counts using extracted products
[Thu May 17 02:12:35 2012] Error reading totcts from fullrun_mos1_xmm0654080401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 17 02:12:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 02:12:35 2012] Using photon index=1.80, rate=0.00364, arf fullrun_mos1_xmm0654080401_pi300-10000_pass1_cl_src2.arf
[Thu May 17 02:12:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 02:12:35 2012] Updating source flux to 1.7e-13
[Thu May 17 02:12:38 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting