[Wed Sep  5 04:22:56 2012] Detection parameters:
  Position = (370.7, 246.0) = 22 42 36.27 53 2 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 206.6 +/- 35.9
  Background counts = 557.4
  Rate = 0.002 +/- 0.0004

[Wed Sep  5 04:22:56 2012] Off-axis axis estimate = 6.47'
[Wed Sep  5 04:30:24 2012] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 04:30:24 2012] Initial guess for spatial extent in simple fitting = 9.67"
[Wed Sep  5 04:30:24 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.012
[Wed Sep  5 04:30:24 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 9.67"
[Wed Sep  5 06:40:49 2012] fullrun_pn_xmm0654030101_pi300-10000_cl_pass0_src63.ximg exists
[Wed Sep  5 06:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654030101_pi300-10000_cl_pass0_src63.csv
[Wed Sep  5 06:40:49 2012] fullrun_pn_xmm0654030101_pi300-10000_cl_pass0_src63_1.ximg exists
[Wed Sep  5 06:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654030101_pi300-10000_cl_pass0_src63.csv
[Wed Sep  5 06:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654030101_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654030101_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 06:40:50 2012] fullrun_pn_xmm0654030101_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Wed Sep  5 06:40:50 2012] fullrun_pn_xmm0654030101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Wed Sep  5 06:40:50 2012] Fit fullrun_pn_xmm0654030101_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Wed Sep  5 11:19:57 2012] Source 70 is offset by -5.758137 and -1.709326 pixels which is larger than
2 X fitted extent = 1.222584 x 1.222584, not incorporating fit results
[Wed Sep  5 11:19:57 2012] Source 70 is offset by -5.712965 and -1.709581 pixels which is larger than
2 X fitted extent = 1.110924 x 1.110924, not incorporating fit results
[Wed Sep  5 11:19:57 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 11:19:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 11:19:57 2012] Assessing source extent using major
[Wed Sep  5 11:19:57 2012] Source does appear to be extended
[Wed Sep  5 11:19:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 11:19:57 2012] Source is confused with source 69
[Wed Sep  5 11:20:39 2012] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 11:20:39 2012] Initial guess for spatial extent in simple fitting = 9.67"
[Wed Sep  5 11:20:39 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.012
[Wed Sep  5 11:20:39 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 9.67"
[Wed Sep  5 14:48:08 2012] fullrun_pn_xmm0654030101_pi300-10000_cl_pass1_src61.ximg exists
[Wed Sep  5 14:48:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654030101_pi300-10000_cl_pass1_src61.csv
[Wed Sep  5 14:48:08 2012] fullrun_pn_xmm0654030101_pi300-10000_cl_pass1_src61_1.ximg exists
[Wed Sep  5 14:48:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0654030101_pi300-10000_cl_pass1_src61.csv
[Wed Sep  5 14:48:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0654030101_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0654030101_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 14:48:10 2012] fullrun_pn_xmm0654030101_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Wed Sep  5 14:48:10 2012] fullrun_pn_xmm0654030101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Wed Sep  5 14:48:10 2012] Fit fullrun_pn_xmm0654030101_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Wed Sep  5 20:51:43 2012] Source 70 is offset by -5.759402 and -1.708568 pixels which is larger than
2 X fitted extent = 1.182713 x 1.182713, not incorporating fit results
[Wed Sep  5 20:51:43 2012] Source 70 is offset by -1.994919 and 4.428145 pixels which is larger than
2 X fitted extent = 1.092299 x 1.092299, not incorporating fit results
[Wed Sep  5 20:51:43 2012] Warning, spatial fit 61 centroid is now closest to src. 72
[Wed Sep  5 20:51:43 2012] Source 70 is offset by 0.369104 and -1.286797 pixels which is larger than
2 X fitted extent = 1.114028 x 1.114028, not incorporating fit results
[Wed Sep  5 20:51:43 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 20:51:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 20:51:43 2012] Assessing source extent using major
[Wed Sep  5 20:51:43 2012] Source does appear to be extended
[Wed Sep  5 20:51:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 20:52:22 2012] XMMSAS src. selection expression = ellipse(32202.632050, 21354.118622, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Sep  5 20:52:22 2012] Writing source region out to fullrun_pn_xmm0654030101_pi300-10000_pass1_cl_src70_src.reg
[Wed Sep  5 20:52:22 2012] Extracting stamp from image fullrun_pn_xmm0654030101_pi300-10000_cl_sm2.00.img.gz, (333, 209) - (408, 284)
[Wed Sep  5 20:52:22 2012] XMMSAS bgd. selection expression = annulus(32202.632050, 21354.118622, 1087.500000, 2175.000000, X, Y) && !ellipse(29487.984070, 23728.352020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30758.513824, 23273.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29834.037933, 22893.459473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30877.950317, 22512.858368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31323.092529, 22633.648926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31262.281738, 22113.571167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30120.786407, 21016.689621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34780.763733, 21076.503448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31206.610000, 20699.922000, 722.292821, 722.292821, 0.000000, X, Y) && !ellipse(30741.359680, 20307.142334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30091.214691, 20667.611679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30780.279280, 19436.890800, 2935.824084, 1691.552049, 68.896000, X, Y) && !ellipse(30828.290600, 19256.101600, 1467.912042, 1467.912042, 0.000000, X, Y) && !ellipse(30558.736145, 18929.447632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31118.004000, 18722.996000, 1002.992029, 1002.992029, -0.000000, X, Y) && !ellipse(31647.118000, 18150.472000, 1627.776047, 1500.720043, 70.925000, X, Y) && !ellipse(29338.288208, 24238.876984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32400.001617, 23965.865631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30825.181610, 23874.503418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31549.287750, 23248.505920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32296.163260, 23038.311600, 506.660815, 506.660815, 0.000000, X, Y) && !ellipse(32288.068237, 22060.207733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30196.598114, 21888.148560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31179.898834, 21352.751282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29853.350616, 21519.216309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31707.965576, 21344.772919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29301.011597, 21166.417343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32135.080139, 20589.864456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31780.429291, 19943.031616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32073.348053, 19418.772186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29962.846680, 18742.557465, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep  5 20:52:22 2012] Writing fullrun_pn_xmm0654030101_pi300-10000_pass1_cl_src70.gif
[Wed Sep  5 21:57:29 2012] Mean detx,y = (6471.12, 3322.58) 
[Wed Sep  5 21:57:34 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 21:57:52 2012] grppha failed
[Wed Sep  5 21:57:52 2012] Setting source spectrum file to fullrun_pn_xmm0654030101_pi300-10000_pass1_cl_src70_src.pi.gz
[Wed Sep  5 21:57:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0654030101_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Wed Sep  5 22:09:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Sep  5 22:09:02 2012] rmf not generated due to insufficient counts
[Wed Sep  5 23:09:22 2012] Updating aperture counts using extracted products
[Wed Sep  5 23:09:22 2012] Error reading totcts from fullrun_pn_xmm0654030101_pi300-10000_pass1_cl_src70_src.pi.gz
[Wed Sep  5 23:09:22 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 23:09:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Sep  5 23:09:31 2012] xmm0654030101/analysis//spectral/fullrun_pn_xmm0654030101_pi300-10000_pass1_cl_src70_pl.csv not found, spectral fit skipped or did not complete