[Wed Sep 5 04:23:44 2012] Detection parameters: Position = (344.4, 272.0) = 22 42 48.95 53 4 42.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 137.1 +/- 29.3 Background counts = 367.1 Rate = 0.001 +/- 0.0003 [Wed Sep 5 04:23:45 2012] Off-axis axis estimate = 3.84' [Wed Sep 5 08:33:55 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting [Wed Sep 5 08:33:55 2012] Initial guess for spatial extent in simple fitting = 8.35" [Wed Sep 5 08:33:55 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.854 [Wed Sep 5 08:33:55 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 8.35" [Wed Sep 5 11:19:36 2012] fullrun_mos2_xmm0654030101_pi300-10000_cl_pass0_src65.ximg exists [Wed Sep 5 11:19:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654030101_pi300-10000_cl_pass0_src65.csv [Wed Sep 5 11:19:36 2012] fullrun_mos2_xmm0654030101_pi300-10000_cl_pass0_src65_1.ximg exists [Wed Sep 5 11:19:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654030101_pi300-10000_cl_pass0_src65.csv [Wed Sep 5 11:19:36 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0654030101_pi300-10000_cl_pass0_src65_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0654030101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 5 11:19:38 2012] fullrun_mos2_xmm0654030101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists [Wed Sep 5 11:19:38 2012] fullrun_mos2_xmm0654030101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists [Wed Sep 5 11:19:38 2012] Fit fullrun_mos2_xmm0654030101_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly [Wed Sep 5 11:20:22 2012] Spatial fit model total counts = 3128.030000, observed total counts = 3127.000000 [Wed Sep 5 11:20:22 2012] Offset between fit and detection position for source 16 = 4.983427 pixels [Wed Sep 5 11:20:22 2012] 3075.012000 total counts/ 2822.040000 bgd. counts: snr = 4.762016 Spatial fit parameters: Offset between fit and detection position for source 16 = 4.983427 pixels Position = (348.8, 269.7) = 22 42 46.83 53 4 27.4 Extent = 16.7 (16.7-33.4)", rotation angle = 0 Source counts = 253.0 +/- 55.5 Background counts = 2822.0 Rate = 0.002 +/- 0.0005 [Wed Sep 5 11:20:22 2012] Vigneting correction estimate = 1.000000 [Wed Sep 5 11:20:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 5 11:20:22 2012] Assessing source extent using major axis lower bound [Wed Sep 5 11:20:22 2012] Source does appear to be extended [Wed Sep 5 11:20:22 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Sep 5 11:20:22 2012] Source is confused with source 19 [Wed Sep 5 17:17:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Sep 5 17:17:45 2012] Initial guess for spatial extent in simple fitting = 16.70" [Wed Sep 5 17:17:45 2012] source mask rpix=3.8, npix_max = 75, mask sum = 81, frac = 1.076 [Wed Sep 5 17:17:45 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 16.70" [Wed Sep 5 20:51:24 2012] fullrun_mos2_xmm0654030101_pi300-10000_cl_pass1_src55.ximg exists [Wed Sep 5 20:51:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654030101_pi300-10000_cl_pass1_src55.csv [Wed Sep 5 20:51:24 2012] fullrun_mos2_xmm0654030101_pi300-10000_cl_pass1_src55_1.ximg exists [Wed Sep 5 20:51:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0654030101_pi300-10000_cl_pass1_src55.csv [Wed Sep 5 20:51:24 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0654030101_pi300-10000_cl_pass1_src55_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0654030101_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 5 20:51:25 2012] fullrun_mos2_xmm0654030101_pi300-10000_cl_pass1_tfrozen_src55.ximg exists [Wed Sep 5 20:51:25 2012] fullrun_mos2_xmm0654030101_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists [Wed Sep 5 20:51:25 2012] Fit fullrun_mos2_xmm0654030101_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly [Wed Sep 5 20:52:02 2012] Source 16 is offset by -3.724621 and -3.842253 pixels which is larger than 2 X fitted extent = 2.192648 x 2.192648, not incorporating fit results [Wed Sep 5 20:52:02 2012] Spatial fit model total counts = 8171.810000, observed total counts = 8166.000000 [Wed Sep 5 20:52:02 2012] Offset between fit and detection position for source 16 = 5.242724 pixels [Wed Sep 5 20:52:02 2012] Warning, changing simple spatial fit ID from 55 to 29 [Wed Sep 5 20:52:02 2012] 8063.700000 total counts/ 6719.730000 bgd. counts: snr = 16.395085 Spatial fit parameters: Offset between fit and detection position for source 16 = 5.242724 pixels Position = (352.1, 273.7) = 22 42 45.21 53 4 45.0 Extent = 36.8 (36.5-36.9)", rotation angle = 0 Source counts = 1344.0 +/- 89.8 Background counts = 6719.7 Rate = 0.01 +/- 0.0008 [Wed Sep 5 20:52:02 2012] Spatial fit model total counts = 7272.790000, observed total counts = 7251.000000 [Wed Sep 5 20:52:02 2012] Offset between fit and detection position for source 16 = 1.732677 pixels [Wed Sep 5 20:52:02 2012] Warning, changing simple spatial fit ID from 29 to 43 [Wed Sep 5 20:52:02 2012] 7127.990000 total counts/ 6627.560000 bgd. counts: snr = 6.147047 Spatial fit parameters: Offset between fit and detection position for source 16 = 1.732677 pixels Position = (353.2, 272.4) = 22 42 44.67 53 4 39.3 Extent = 28.3 (14.7-35.1)", rotation angle = 0 Source counts = 500.4 +/- 84.4 Background counts = 6627.6 Rate = 0.005 +/- 0.0008 [Wed Sep 5 20:52:02 2012] Vigneting correction estimate = 1.000000 [Wed Sep 5 20:52:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 5 20:52:02 2012] Assessing source extent using major axis lower bound [Wed Sep 5 20:52:02 2012] Source does appear to be extended [Wed Sep 5 20:52:02 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Sep 5 22:33:53 2012] XMMSAS src. selection expression = ellipse(30684.172000, 23650.496000, 1697.652049, 1697.652049, 0.000000, X, Y) [Wed Sep 5 22:33:53 2012] Writing source region out to fullrun_mos2_xmm0654030101_pi300-10000_pass1_cl_src16_src.reg [Wed Sep 5 22:33:53 2012] Extracting stamp from image fullrun_mos2_xmm0654030101_pi300-10000_cl_sm2.00.img.gz, (256, 175) - (451, 370) [Wed Sep 5 22:33:53 2012] XMMSAS bgd. selection expression = annulus(30684.172000, 23650.496000, 2829.420081, 5658.840163, X, Y) && !ellipse(31403.192108, 18507.020523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30651.548000, 18999.776000, 3075.408088, 3075.408088, 0.000000, X, Y) && !ellipse(27162.345800, 27771.034600, 323.712809, 323.712809, 0.000000, X, Y) && !ellipse(31063.703800, 19287.808800, 1103.336032, 1103.336032, 0.000000, X, Y) && !ellipse(30683.283569, 17971.714844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32403.038971, 17172.950607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29886.655200, 20615.036600, 1484.480043, 1484.480043, 0.000000, X, Y) && !ellipse(31425.332397, 17445.246429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33211.580000, 21424.096000, 1561.848045, 1561.848045, 0.000000, X, Y) && !ellipse(31584.397858, 18972.310425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31676.662000, 16821.342000, 2963.800085, 2337.248067, 359.903000, X, Y) && !ellipse(28963.804600, 24832.111600, 425.231212, 425.231212, 0.000000, X, Y) && !ellipse(31059.794000, 19359.786000, 1046.808030, 1046.808030, 0.000000, X, Y) && !ellipse(32337.001349, 18480.773564, 1126.178567, 940.103239, 90.000353, X, Y) && !ellipse(30585.305200, 19874.820000, 1516.672044, 1516.672044, 0.000000, X, Y) && !ellipse(30229.168000, 20417.846000, 2093.616060, 2093.616060, 0.000000, X, Y) && !ellipse(30350.038200, 19759.382000, 1543.664044, 1543.664044, 0.000000, X, Y) && !ellipse(32151.345400, 22610.574000, 1665.264048, 1665.264048, 0.000000, X, Y) && !ellipse(31455.766000, 22216.326000, 1460.256042, 1460.256042, 0.000000, X, Y) && !ellipse(34800.352000, 21071.315000, 402.331212, 402.331212, 0.000000, X, Y) && !ellipse(30724.171021, 22219.409927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31205.952000, 23133.953000, 1477.200043, 1477.200043, 0.000000, X, Y) && !ellipse(31509.279114, 20567.254227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26271.400800, 17813.928600, 471.221614, 471.221614, 0.000000, X, Y) && !ellipse(31875.514000, 21107.428000, 1544.512044, 1544.512044, 0.000000, X, Y) && !ellipse(30776.496000, 23391.942000, 1438.512041, 1438.512041, 0.000000, X, Y) && !ellipse(33450.527600, 28450.965800, 395.523211, 395.523211, 0.000000, X, Y) && !ellipse(32632.887512, 18142.499603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31456.579437, 19768.816559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29324.604187, 21523.690033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32239.932000, 22138.920000, 832.632024, 832.632024, 0.000000, X, Y) && !ellipse(29537.176453, 20207.372971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31297.777800, 24302.469800, 1403.896040, 1403.896040, 0.000000, X, Y) && !ellipse(29707.628000, 23371.538000, 2569.632074, 2569.632074, 0.000000, X, Y) && !ellipse(33086.746185, 17975.114609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30568.636749, 17438.786743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30760.441376, 21619.441010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31560.080444, 23516.955933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32382.858093, 21638.821396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30165.846000, 18362.114000, 1673.232048, 1673.232048, 0.000000, X, Y) && !ellipse(24386.432892, 22176.224548, 870.000000, 870.000000, 0.000000, X, Y) [Wed Sep 5 22:33:53 2012] Writing fullrun_mos2_xmm0654030101_pi300-10000_pass1_cl_src16.gif [Wed Sep 5 23:02:16 2012] Mean detx,y = (-4081.53, -1985.60) [Wed Sep 5 23:02:17 2012] Setting backscal keywords in source and bgd. spectrum [Wed Sep 5 23:02:52 2012] grppha failed [Wed Sep 5 23:02:52 2012] Setting source spectrum file to fullrun_mos2_xmm0654030101_pi300-10000_pass1_cl_src16_src.pi.gz [Wed Sep 5 23:02:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0654030101_pi300-10000_pass1_cl_src16_bgd.pi.gz [Wed Sep 5 23:09:25 2012] Updating aperture counts using extracted products [Wed Sep 5 23:09:25 2012] Error reading totcts from fullrun_mos2_xmm0654030101_pi300-10000_pass1_cl_src16_src.pi.gz [Wed Sep 5 23:09:25 2012] No arf file for this source, not re-computing flux [Wed Sep 5 23:09:29 2012] Flag b found in src. 16 procflags, skipping spectral fitting [Wed Sep 5 23:09:29 2012] Flag c found in src. 16 procflags, skipping spectral fitting [Wed Sep 5 23:09:29 2012] Source 16 has no response, skipping [Wed Sep 5 23:09:30 2012] xmm0654030101/analysis//spectral/fullrun_mos2_xmm0654030101_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete