[Sat Aug 11 12:56:27 2012] Detection parameters:
  Position = (347.4, 207.3) = 5 30 21.13 11 28 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 159.3 +/- 33.9
  Background counts = 139.0
  Rate = 0.003 +/- 0.0007

[Sat Aug 11 12:56:28 2012] Off-axis axis estimate = 7.50'
[Sat Aug 11 14:24:38 2012] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 14:24:38 2012] Initial guess for spatial extent in simple fitting = 10.18"
[Sat Aug 11 14:24:38 2012] source mask rpix=2.3, npix_max = 32, mask sum = 21, frac = 0.651
[Sat Aug 11 14:24:38 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.18"
[Sat Aug 11 15:26:37 2012] fullrun_mos2_xmm0653950101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Aug 11 15:26:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653950101_pi300-10000_cl_pass0_src11.csv
[Sat Aug 11 15:26:37 2012] fullrun_mos2_xmm0653950101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Aug 11 15:26:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653950101_pi300-10000_cl_pass0_src11.csv
[Sat Aug 11 15:26:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653950101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653950101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 15:26:37 2012] fullrun_mos2_xmm0653950101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Aug 11 15:26:37 2012] fullrun_mos2_xmm0653950101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Aug 11 15:26:37 2012] Fit fullrun_mos2_xmm0653950101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Aug 11 15:26:57 2012] Spatial fit model total counts = 128.732000, observed total counts = 123.000000
[Sat Aug 11 15:26:57 2012] Offset between fit and detection position for source 3 = 4.826243 pixels
[Sat Aug 11 15:26:57 2012] 129.231200 total counts/ 23.805200 bgd. counts: snr = 21.607863
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.826243 pixels
  Position = (349.3, 202.9) = 5 30 20.56 11 28 24.5
  Extent = 15.6 (7.4-20.4)", rotation angle = 0
  Source counts = 105.4 +/- 11.4
  Background counts = 23.8
  Rate = 0.003 +/- 0.0003
[Sat Aug 11 15:26:57 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 15:26:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 15:26:57 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 15:26:57 2012] Source does appear to be extended
[Sat Aug 11 15:26:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 16:34:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 16:34:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 11 16:34:06 2012] Initial guess for spatial extent in simple fitting = 15.64"
[Sat Aug 11 16:34:06 2012] source mask rpix=3.6, npix_max = 67, mask sum = 20, frac = 0.298
[Sat Aug 11 16:34:06 2012] Skipping simple spatial due to low active detector fraction
[Sat Aug 11 17:20:00 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 17:20:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 17:20:00 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 17:20:00 2012] Source does appear to be extended
[Sat Aug 11 17:20:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 18:29:04 2012] XMMSAS src. selection expression = ellipse(30343.450000, 17599.994000, 938.646180, 938.646180, 0.000000, X, Y)
[Sat Aug 11 18:29:04 2012] Writing source region out to fullrun_mos2_xmm0653950101_pi300-10000_pass1_cl_src3_src.reg
[Sat Aug 11 18:29:04 2012] Extracting stamp from image fullrun_mos2_xmm0653950101_pi300-10000_cl_sm2.00.img.gz, (295, 149) - (403, 257)
[Sat Aug 11 18:29:04 2012] XMMSAS bgd. selection expression = annulus(30343.450000, 17599.994000, 1564.410300, 3128.820600, X, Y) && !ellipse(31492.204620, 19955.993469, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 11 18:29:04 2012] Writing fullrun_mos2_xmm0653950101_pi300-10000_pass1_cl_src3.gif
[Sat Aug 11 18:32:43 2012] Mean detx,y = (6364.49, 6214.46) 
[Sat Aug 11 18:32:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 18:34:10 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 18:34:10 2012] Setting source spectrum file to fullrun_mos2_xmm0653950101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Aug 11 18:34:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0653950101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Aug 11 19:08:21 2012] Updating aperture counts using extracted products
[Sat Aug 11 19:08:21 2012] Error reading totcts from fullrun_mos2_xmm0653950101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Aug 11 19:08:23 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 19:08:23 2012] Using photon index=1.80, rate=0.0029, arf fullrun_mos2_xmm0653950101_pi300-10000_pass1_cl_src3.arf
[Sat Aug 11 19:08:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 19:08:23 2012] Updating source flux to 8.9e-14