[Mon Aug  6 10:27:07 2012] Detection parameters:
  Position = (284.0, 199.2) = 18 16 1.77 -14 7 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 289.5 +/- 28.3
  Background counts = 256.0
  Rate = 0.01 +/- 0.001

[Mon Aug  6 10:27:08 2012] Off-axis axis estimate = 7.27'
[Mon Aug  6 15:07:54 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 15:07:54 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Mon Aug  6 15:07:54 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.790
[Mon Aug  6 15:07:54 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 10.06"
[Mon Aug  6 20:45:52 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src51.ximg exists
[Mon Aug  6 20:45:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src51.csv
[Mon Aug  6 20:45:52 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src51_1.ximg exists
[Mon Aug  6 20:45:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src51.csv
[Mon Aug  6 20:45:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 20:45:54 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Mon Aug  6 20:45:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_tfrozen_src51.csv
[Mon Aug  6 20:45:54 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Mon Aug  6 20:45:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_tfrozen_src51.csv
[Mon Aug  6 20:45:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653910501_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 20:46:28 2012] Warning, spatial fit 51 centroid is now closest to src. 6
[Mon Aug  6 20:46:28 2012] Vigneting correction estimate = 1.000000
[Mon Aug  6 20:46:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug  6 20:46:28 2012] Assessing source extent using major
[Mon Aug  6 20:46:28 2012] Source does appear to be extended
[Mon Aug  6 20:46:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug  6 20:46:28 2012] Source is confused with source 6
[Mon Aug  6 23:46:25 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 23:46:25 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Mon Aug  6 23:46:25 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.790
[Mon Aug  6 23:46:25 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 10.06"
[Tue Aug  7 05:08:09 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src50.ximg exists
[Tue Aug  7 05:08:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src50.csv
[Tue Aug  7 05:08:09 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src50_1.ximg exists
[Tue Aug  7 05:08:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src50.csv
[Tue Aug  7 05:08:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 05:08:11 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Tue Aug  7 05:08:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_tfrozen_src50.csv
[Tue Aug  7 05:08:11 2012] fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Tue Aug  7 05:08:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_tfrozen_src50.csv
[Tue Aug  7 05:08:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653910501_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 05:08:43 2012] Warning, spatial fit 50 centroid is now closest to src. 81
[Tue Aug  7 05:08:43 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 05:08:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 05:08:43 2012] Assessing source extent using major
[Tue Aug  7 05:08:43 2012] Source does appear to be extended
[Tue Aug  7 05:08:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 06:13:34 2012] XMMSAS src. selection expression = ellipse(24661.847046, 17286.165039, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug  7 06:13:34 2012] Writing source region out to fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src76_src.reg
[Tue Aug  7 06:13:34 2012] Extracting stamp from image fullrun_mos2_xmm0653910501_pi300-10000_cl_sm2.00.img.gz, (247, 162) - (322, 237)
[Tue Aug  7 06:13:34 2012] XMMSAS bgd. selection expression = annulus(24661.847046, 17286.165039, 1087.500000, 2175.000000, X, Y) && !ellipse(25176.439514, 17399.368851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27254.180481, 17440.111603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24708.328644, 16754.357361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26474.119598, 17437.556137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25116.111938, 15962.859940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24985.824341, 15539.008408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25319.800000, 14940.512000, 509.584015, 509.584015, 0.000000, X, Y) && !ellipse(22551.151855, 17201.748383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24883.093292, 14892.883133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23861.354000, 16544.629800, 1679.616048, 1679.616048, 0.000000, X, Y) && !ellipse(25053.193054, 15358.329681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21722.768112, 17186.943939, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug  7 06:13:34 2012] Writing fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src76.gif
[Tue Aug  7 06:28:11 2012] Mean detx,y = (-223.28, 7064.44) 
[Tue Aug  7 06:28:12 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug  7 06:28:20 2012] Binned source spectrum to 10 counts/bin
[Tue Aug  7 06:28:20 2012] Setting source spectrum file to fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Tue Aug  7 06:28:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Tue Aug  7 07:36:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug  7 07:36:27 2012] rmf not generated due to insufficient counts
[Tue Aug  7 07:56:57 2012] Updating aperture counts using extracted products
[Tue Aug  7 07:56:57 2012] Error reading totcts from fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Tue Aug  7 07:56:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 07:56:58 2012] Using photon index=1.80, rate=0.0147, arf fullrun_mos2_xmm0653910501_pi300-10000_pass1_cl_src76.arf
[Tue Aug  7 07:56:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 07:56:58 2012] Updating source flux to 2.5e-13
[Tue Aug  7 08:00:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting